Two leaks detection in viscoelastic pipeline systems by means of transient

This paper presents a technique for detecting and locating leaks in a single viscoelastic pipe, by means of transient analysis. The system studied is a reservoir-pipe-valve structure. The viscoelastic behavior of the pipe wall material is modeled by a generalized KelvinVoigt model. To determine the leak location, the mathematical formulation has been solved by the method of characteristics. The approach by the method of characteristics is often chosen because it is based on the concept of acoustic wave propagation which is the main mechanism of all transient events considered. The presence of the two leaks in a pipe partially reflects pressure waves initiated by the sudden closure of a downstream shut-off valve. These waves affect the shape and the amplitude of the time-history-pressure. The computed results describe the influence of the presence of two leaks on pressure time-history and the effect of leaks locations and sizes on the pressure signal behavior. The effect of the pipe wall viscoelasticity on the two leaks detection and sizing is also discussed. The leaks discharges are determined by resolving two independent equations derived from literatures and based on transient analysis. The friction and leaks depths effects on two leaks locations and sizing are involved.     

Mass-transfer processes of chromium(VI) adsorption onto guava seeds

The chromium(VI) biosorption onto guava seeds, as an alternative method for Cr⁶⁺ removal from aqueous solutions, was investigated. The parameters affecting kinetics and equilibrium of Cr⁶⁺ adsorption onto guava seeds were studied. An external mass-transfer diffusion coefficient k and intra-particle diffusion coefficient k_i were determined to measure the rate-limiting step of adsorption. A single external mass-transfer diffusion model and intra-particle diffusion models were used. The effects of initial pH, sorbent mass, and initial Cr⁶⁺ concentrations on mass-transfer coefficients were investigated. The external mass-transfer coefficient has an average value of 7.2×10^-3 cm s^-1, while the intra-particle mass-transfer diffusion coefficient was 0.34 mg g^-1 min^-0.5. This indicates that external diffusion to the guava seeds surface and intra-particle diffusion are both involved in the sorption process. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models with an average correlation coefficient R²=0.98. The maximum removal of Cr⁶⁺ was obtained at pH 1 (about 100% for adsorbent dose of 15 g l^-1 and 25 mg l^-1 initial concentration of Cr⁶⁺). The results indicated that the guava seeds exhibit acceptable sorption capacity.     

Removal of toxic chromium(VI) from aqueous solution by activated carbon using Casuarina equisetifolia

Highly activated carbon from the seed husk of Casuarina Casuarinas equisetifolia, a worldwide famous plant, have been prepared and tested for the removal of toxic Cr(VI) from its aqueous solution. The adsorbent was investigated for influences of initial chromium concentration (75, 100, 125, and 150 mg l^-1), pH, contact time, and quantity of carbon on removal of Cr(VI) from aqueous solution at room temperature (25±2 °C). The adsorption kinetic of Cr(VI) was studied, and the rates of sorption were found to conform to pseudo-second-order kinetics with a good correlation (R²≥0.99). The Langmuir and Freundlich models fit the isotherm data well. Furthermore, the Gibbs free energy was obtained for each system and was found to be-5.29 kJ mol^-1 for removal of Cr(IV). The negative value of Δ G° indicates the feasibility and spontaneous nature of adsorption. The results indicate that acidic pH (1.05) supported the adsorption of Cr(IV) on activated carbon. The maximum adsorption capacity of Cr(VI) on activated carbon was about 172.4 mg g^-1 at pH 1.05.     

Removal of phosphate ions from aqueous solution using Tunisian clays minerals and synthetic zeolite

Phosphate ions are usually considered to be responsible for the algal bloom in receiving water bodies and aesthetic problems in water. From the environmental point of view, the management of such contaminant and valuable resource is very important. The present work deals with the removal of phosphate ions from aqueous solutions using kaolinitic and smectic clay minerals and synthetic zeolite as adsorbent. The pH effect and adsorption kinetic were studied. It was found that phosphate could be efficiently removed at acidic pH (between 4 and 6) and the second order model of kinetics is more adopted for all samples. The isotherms of adsorption of phosphate ions by the two clays and the zeolite samples show that the zeolite has the highest rate of uptake (52.9 mg P/g). Equilibrium data were well fitted with Langmuir and Freundlich isotherm.     

Elaboration of a Bio-Colored Material Based on Natural Dye and Polybutylene Succinate: Comparative Study with Colored Polylactic Acid

Journal of Polymers and the Environment - In the context of sustainable development and natural products valorization, new ecological materials enter a logic aimed at removing the causes of...     

The false alarm/surprise trade-off in weather warnings systems: an expected utility theory perspective

Environment Systems and Decisions - Early warning systems for weather events are becoming widespread as technological capacities develop. For warnings to be effective, they must allow enough lead...     

Polyaniline films for efficient removal of aromatic acids from water

Adsorbents in the form of powders are commonly used to filtrate organic compounds in waters. However, this technique requires the separation of the solid phase from the solution after adsorption experiments. Here we propose the use of films as adsorbents. We synthesized polyaniline films by chemical oxidative polymerization of aniline on red ceramic brick. This film was tested to remove trimellitic, hemimellitic and pyromellitic acids as model molecules of the biodegradation of aquatic humic substances. We evaluated the effect of pH, contact time and initial concentration. Our results show that optimal adsorption conditions required 45 min of solid/liquid contact at pH 7 and an initial concentration of 20 mg/l. The maximum adsorption capacities for hemimellitic, trimellitic and pyromellitic acids are 154.83 for hemimellitic acid, 161.88 for trimellitic acid and 175.26 mg/g for pyromellitic acid. The adsorption efficiency of the polyaniline film decreased only by 13 % after four cycles. Overall, we conclude that polyaniline films are promising separable adsorbents compared to conventional adsorbents for removal of aromatic polycarboxylic acids from water.     

Maximising the net social benefit of the construction of post‐disaster alternative housing projects

The widespread destruction that follows large‐scale natural disasters, such as Hurricane Katrina in August 2005, challenges the efficacy of traditional temporary housing methods in providing adequate solutions to housing needs. Recognising these housing challenges, the Congress of the United States allocated, in 2006, USD 400 million to the Department of Homeland Security to support Alternative Housing Pilot Programs, which are intended to explore the possibilities of providing permanent and affordable housing to displaced families instead of traditional temporary housing. This paper presents a new methodology and optimisation model to identify the optimal configurations of post‐shelter housing arrangements to maximise the overall net socioeconomic benefit. The model is capable of quantifying and optimising the impacts of substituting temporary housing with alternative housing on the social and economic welfare of displaced families as well as the required additional costs of doing so. An application example is presented to illustrate the use of the model and its capabilities.     

Field dissipation and health hazard assessment of Fenhexamid on Egyptian grapes

Dissipation behavior and hazard assessment of the fungicide fenhexamid applied to grapes were investigated under climatic conditions in Egypt. Fenhexamid residues were extracted from grape samples with ethyl acetate. The extract was cleaned up by QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, and determined by gas chromatographic method (GC-μECD). The average recoveries ranged between 94.2% and 99.4% with associated relative standard deviation not exceeding 12%. The estimated limit of quantification for fenhexamid was 0.1 mg/kg. The field results showed that fenhexamid dissipated rapidly from grapes and had a half-life of approximately 4.21 days. Hazard assessment was evaluated by using the hazard quotient (HQ). Data showed that the HQ value was significantly less than HQ = 1. Results indicate that hazard of fenhexamid use in grape even at 1.5-fold higher than recommended dosage was negligible to humans. This study could provide guidance for safe and reasonable use of fenhexamid in grapes and prevent health problems to consumers. However, further hazard assessment studies are needed to ascertain the hazard of fenhexamid residues on grape to vulnerable groups, including children, pregnant women, and elderly consumers.