A model for positive environmental control

In the control of pollution, two apparently important facts are often negelected: (1) removal of a particular pollutant from a particular source and location may merely result in transforming it into a pollutant, or pollutants of different forms, in other locations; (2) the activity of pollution control itself requires inputs, the production of which may generate additional pollutants. In order to achieve positive environmental control, these two facts must be considered in selecting control processes and in determining optimum control standards. It is necessary that an integrated approach to pollution control be taken, making allowances for ecological inter-relations. As practiced today, pollution control is handled as separate problems of disposing gas, liquid and solid wastes. This paper proposes a model for evaluating the total environmental impact of a pollution control process or method. Theoretical criteria for determining an optimum control level with or without resource constraint are also derived.     

Development of a procedure for sustainable in situ aquifer denitrification

Denitrification experiments have provided data showing the pitfalls and successes in developing a sustainable injection/extraction system in a sand and gravel aquifer. Experiments increase in complexity from continuous injection at one well to automated‐pulsed eight well injections. In both continuous and pulsed injection of organic carbon, 40 mg NO_3‐N l^?1 was reduced below the detection limit of < 0.1 mg NO_3‐N l^?1 in the denitrification zones. Under continuous injection, accumulation of bacterial exudates in the vicinity of the injection well resulted in injection well clogging within ten days. Periodic cleaning of the injection well and the adjacent gravel matrix was accomplished by using a tool developed to circulate a cleaning solution composed of 5 percent H₂O₂ and 0.02 percent NaOCl; but, biofouling could not be eliminated. In the later experiments, acetate became the carbon amendment because ethanol promoted more biomass development. A specialized pulse injection procedure was developed to separate nitrate from acetate‐C and was successful in alleviating the proliferation of bacterial exudates without affecting the performance of the denitrification system. Using pulsed injection, a maximum of 72 percent nitrate reduction was accomplished in the extraction well water, and denitrification was sustained for three months without clogging. © 2003 Wiley Periodicals, Inc.     

The use of enhanced bioremediation at the Savannah River Site to remediate pesticides and PCBs

Enhanced bioremediation is quickly developing into an economical and viable technology for the remediation of contaminated soils. Until recently, chlorinated organic compounds have proven difficult to bioremediate. Environmentally recalcitrant compounds, such as polychlorinated biphenyls (PCBs) and persistent organic pesticides (POPs) such as dichlorodiphenyl trichloroethane (DDT) have shown to be especially arduous to bioremediate. Recent advances in field‐scale bioremedial applications have indicated that biodegradation of these compounds may be possible. Engineers and scientists at the Savannah River Site (SRS), a major DOE installation near Aiken, South Carolina, are using enhanced bioremediation to remediate soils contaminated with pesticides (DDT and its metabolites, heptachlor epoxide, dieldrin, and endrin) and PCBs. This article reviews the ongoing remediation occurring at the Chemicals, Metals, and Pesticides (CMP) Pits using windrow turners to facilitate microbial degradation of certain pesticides and PCBs. © 2003 Wiley Periodicals, Inc.     

Societal Concerns about Pork and Pork Production and Their Relationships to the Production System

Pork producers in Western Europe moreand more encounter a variety of societalconcerns about pork and pork production. Sofar, however, producers predominantly focusedon low consumer prices, therewith addressingjust one concern. This resulted in an intensiveand large-scale production system, decreasinglyrelated to the area of farm land, andaccompanied with increasing concerns aboutsafety and healthiness of pork, animal welfare,environmental pollution, and others.An overview was given of possible concernsabout West-European pork production with theconsumers, citizens, and producers, and thoseconcerns are traced back to the pork productionsystem. The various kinds and qualities ofinformation about the pork production system onwhich possible concerns are based have beenworked out extensively in this paper. Knowledgeabout the aspects of pork production that cangive rise to concerns can be used in two ways.First, the communication about those aspectstowards consumers and citizens can be adjustedor extended to give them better possibilitiesto make food choices or to develop their ownopinions about pork production. Second,producers could change the pork productionsystem such that it better satisfies consumersand citizens. Such adaptations are wellpossible, as three pork quality schemes, whichhave been evaluated, illustrate. However, mostof these adaptations can only be carried out atthe cost of the present low consumer prices andwill not occur spontaneously on a large scale.Therefore, accounting for the type andrelevance of the concerns, legislation isnecessary to address societal concerns in abalanced way such that pork production systemsbecome acceptable for the majority of oursociety.     

The Water Poverty Index: Development and application at the community scale

The article details the development and uses of the water poverty index (WPI). The index was developed as a holistic tool to measure water stress at the household and community levels, designed to aid national decision makers, at community and central government level, as well as donor agencies, to determine priority needs for interventions in the water sector. The index combines into a single number a cluster of data directly and indirectly relevant to water stress. Subcomponents of the index include measures of: access to water; water quantity, quality and variability; water uses (domestic, food, productive purposes); capacity for water management; and environmental aspects.
The WPI methodology was developed through pilot projects in South Africa, Tanzania and Sri Lanka and involved intensive participation and consultation with all stakeholders, including water users, politicians, water sector professionals, aid agency personnel and others. The article discusses approaches for the further implementation of the water poverty index, including the possibilities of acquiring the necessary data through existing national surveys or by establishing interdisciplinary water modules in school curricula. The article argues that the WPI fills the need for a simple, open and transparent tool, one that will appeal to politicians and decision makers, and at the same time can empower poor people to participate in the better targeting of water sector interventions and development budgets in general.     

Strategies for sustainable development of the small-scale gold and diamond mining industry of Ghana

The small-scale gold and diamonds mining industry is of great importance to Ghana. Since its regularization in 1989 the sector has produced and sold over 1.5 million troy ounces of gold and 8.0 million carats of diamonds. During the same period the sector also provided direct employment to over 100,000 people and improved the socioeconomic life of many individuals and communities. However, these were largely achieved at a cost to the environment in areas where mining is carried out and there is the need to develop the industry in a sustainable manner. This paper looks at the developments in the small-scale gold and diamonds mining industry in Ghana and proposes some strategies on how the concepts of sustainable development could be applied to the industry.     

USE OF STAGE DATA TO CHARACTERIZE HYDROLOGIC CONDITIONS IN AN URBANIZING ENVIRONMENT1

ABSTRACT: This paper presents the results of a study on the use of continuous stage data to describe the relation between urban development and three aspects of hydrologic condition that are thought to influence stream ecosystems—overall stage variability, stream flashiness, and the duration of extreme‐stage conditions. This relation is examined using data from more than 70 watersheds in three contrasting environmental settings—the humid Northeast (the metropolitan Boston, Massachusetts, area); the very humid Southeast (the metropolitan Birmingham, Alabama, area); and the semiarid West (the metropolitan Salt Lake City, Utah, area). Results from the Birmingham and Boston studies provide evidence linking increased urbanization with stream flashiness. Fragmentation of developed land cover patches appears to ameliorate the effects of urbanization on overall variability and flashiness. There was less success in relating urbanization and streamflow conditions in the Salt Lake City study. A related investigation of six North Carolina sites with long term discharge and stage data indicated that hydrologic condition metrics developed using continuous stage data are comparable to flow based metrics, particularly for stream flashiness measures.