Characteristics of aerosols collected in central Taiwan during an Asian dust event in spring 2000

Aerosol samples for PM(2.5) and PM(2.5-10) were collected at four locations in central Taiwan from 26 to 31 March 2000, a period that experienced exceedingly high PM levels from 29 to 30 March due to the passage of an Asian dust storm. The samples were analyzed for mass, metallic elements, ions, and carbon. The purpose of this paper is to investigate the influence of the dust storm on the characteristics of local ambient particulate matter. The results indicate that the concentrations of the crustal elements Ca, Mg, Al, Fe and the sea salt species Na+ and Cl- in PM(2.5-10) during the dust episode exceed the mean concentrations in the non-dust period by factors of 3.1, 2.9, 2.6, 2.2, 2.3 and 2.1 respectively. Enrichment factors of Ca, Fe, and Mg in PM(2.5-10) during the dust event are close to unity, indicating that these elements are from soil. Reconstruction of aerosol compositions revealed that soil of coarse particulates elevated approximately 50% in the dust event. It is noted that during the dust event, the ratio of Mg/Al in PM(2.5-10) ranged from 0.21 to 0.25 while that of Ca/Al ranged from 0.6 to 0.9, levels more constant than those obtained in non-dust period.     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

Production of new concrete with leather tannery waste used as partial replacement of the natural sand

Journal of Material Cycles and Waste Management - Leather production is a technology that boosts the economy because of its versatility and durability. However, the wastes generated throughout the...     

The use of NTA and EDDS for enhanced phytoextraction of metals from a multiply contaminated soil by Brassica carinata

The potential of nine different species to grow in the presence of metals (As, Cd, Cu, Pb and Zn) and to accumulate them in the shoots was assessed for each metal separately by germination and root length tests, and successively by hydroponic experiments. Of the nine species tested, Brassica carinata was the species that accumulated the highest amounts of metals in shoots without suffering a significant biomass reduction. To further evaluate the potential of B. carinata for chelant-enhanced phytoextraction of a natural, multiply metal-polluted soil (As, Cd, Cu, Pb and Zn), both hydroponic and pot experiments were carried out with nitrilotriacetic acid (NTA) or (S,S)-ethylenediamine disuccinic acid (EDDS) as complexing agents. The hydroponic study with solutions containing the five metals together showed that accumulation of Cd, Cu, Pb and Zn in shoots was higher following EDDS addition compared to NTA. EDDS was more effective than NTA in desorbing Cu, Pb and Zn from the soil, whereas As and Cd were poorly extracted. B. carinata plants were grown for 4 weeks in the multiply metal-contaminated soil and then the soil was amended with 5 mmol kg(-1) NTA or EDDS. All plants were harvested 1 week after amendment. In comparison to NTA, EDDS was more effective in enhancing the concentrations of Cu, Pb and Zn in B. carinata shoots (2- to 4-fold increase compared to the control). One week after chelant addition, the DTPA-extractable metal concentrations in the polluted soil were lower in the EDDS treatment in comparison with the NTA amendment. Even though B. carinata showed a reduced growth and a relatively low metal uptake, it demonstrated the ability to survive and tolerate the presence of more metals simultaneously.     

Responses of Physical, Chemical, and Biological Indicators of Water Quality to a Gradient of Agricultural Land Use in the Yakima River Basin, Washington

The condition of 25 stream sites in the Yakima River Basin, Washington, were assessed by the U.S. Geological Survey's National Water-Quality Assessment Program. Multimetric condition indices were developed and used to rank sites on the basis of physical, chemical, and biological characteristics. These indices showed that sites in the Cascades and Eastern Cascades ecoregions were largely unimpaired. In contrast, all but two sites in the Columbia Basin ecoregion were impaired, some severely. Agriculture (nutrients and pesticides) was the primary factor associated with impairment and all impaired sites were characterized by multiple indicators of impairment. All indices of biological condition (fish, invertebrates, and algae) declined as agricultural intensity increased. The response exhibited by invertebrates and algae suggested a threshold response with conditions declining precipitously at relatively low levels of agricultural intensity and little response at moderate to high levels of agricultural intensity. This pattern of response suggests that the success of mitigation will vary depending upon where on the response curve the mitigation is undertaken. Because the form of the community condition response is critical to effective water-quality management, the National Water-Quality Assessment Program is conducting studies to examine the response of biota to gradients of land-use intensity and the relevance of these responses to water-quality management. These land-use gradient pilot studies will be conducted in several urban areas starting in 1999.     

Luminescence spectroscopy as a screening tool for the potential carcinogenicity of asphalt fumes

A subset of polycyclic aromatic compounds (PACs), which contain 4-6 annulated rings, has been documented as the source of carcinogenicity in animal skin painting studies of petroleum products and asphalt fumes (M. L. Machado, P. W. Beatty, J. C. Fetzer, A. H. Glickman and E. L. McGinnis, Fundam. Appl. Toxicol., 1993, 21, 492; T. A. Roy, S. W. Johnson, G. R. Blackburn and C. R. Mackerer, Fundam. Appl. Toxicol., 1988, 10, 466). Because of the chemical complexity of these materials, it has been difficult to identify the specific compounds within this broad range of PACs responsible for their carcinogenicity. An alternative approach using luminescence spectroscopy was taken in this study to quantify, without identification, a subset of these compounds that appears to cause cancer. The fluorescence response at a specific wavelength pair was obtained for 39 laboratory asphalt fume condensates from animal skin painting studies, yielding a linear correlation coefficient of R2 = 0.96 between the fluorescence response in these materials and the carcinogenicity found in animal studies. In the absence of other asphalt fume condensates from animal studies, 17 petroleum oils were also evaluated using this method and compared with the available animal skin painting data. The details of the method include a clean-up step that removes the highly polar compounds and spectral subtraction of two- and three-ring PAC interference, both of which add to the fluorescence response, yet were not found to contribute to a carcinogenic response from skin painting studies. Full scan fluorescence plots also produce a fingerprint which can be used to assess contamination, such as coal tar products or mixtures of materials, that are not defined as asphalt, yet may be present in the working environment.     

Essential (Cu) and nonessential (Cd and Pb) metals in ichthyofauna from the coasts of Sinaloa state (SE Gulf of California)

With the aim of giving an overview on concentration and distribution of Cd, Cu, and Pb in fish from the coasts of Sinaloa state (SE Gulf of California), specimens with different feeding habits were collected in five locations. Sampling occurred between June 2003 and March 2004. Metal analyses on fish tissues were made by graphite furnace (Cd, Pb) and flame (Cu) atomic absorption spectrophotometry. Metal concentrations in tissues of carnivorous fish were grouped together and compared with corresponding concentrations in non-carnivorous fish; Cu and Pb levels were significantly (p?<?0.05) higher in liver of non-carnivorous species. Though no samples exceeded the maximum level set in international legislation for fish, from the perspective of the public health and considering the legal limits of fishery products for human consumption, Cu concentrations were exceeded (in tissues different from muscle) in four carnivorous and five non-carnivorous species according to the Australian legislation. In the case of Cd, two carnivorous species (Pomadasys leuciscus and Caulolatilus princeps) and one non-carnivorous species (Mugil cephalus), showed concentrations over the maximum level of 2 μg g^???1 dry weight considered in the Mexican legislation. Considering average amounts of fish consumption in Mexico, daily mineral intake (DMI) values for Cu and percentage weekly intake (PWI) of Cd and Pb were estimated; none of the analyzed metals in edible portion of analyzed fish could be detrimental to humans.     

Can we document if regulation and Best Available Techniques (BAT) have any positive impact on the marine environment? A case based on a steel mill in Greece

In order to document the impact of Best Available Techniques (BAT) and implementation of regulation on the improvement of the coastal marine environment state, we examined the case of a representative steel mill located at the Gulf of Elefsis (Greece). The evaluation of metal pollution was based on the analysis of major and trace elements, organic carbon, magnetic properties, and sediment accumulation rates, in sediment cores obtained from the vicinity of the plant. The analytical data are discussed in relation to steel production, changes of production routes, and adoption of BAT introduced in order to fulfill EU and national legislation. The results show that the input of pollutants to sediments and the degree of contamination were reduced by approximately 40–70% in the decade 2003–2015 in comparison to the periods of high discharges (1963–2002), whereas the toxicity risks from “high-to-extremely high” were reduced to “medium-to-high.”