STABILITY AND REACH LENGTH IN WATER SURFACE PROFILE DETERMINATION1

ABSTRACT: Extension of basic step methods of backwater computation to reaches of finite length is examined. Accuracies of commonly accepted hydraulic loss equations under particular water surface profile conditions are compared. Simulation of energy lines within a reach by parabolic curves is found to minimize error provided orientation of the axis of the parabola is selected in accordance with prevailing hydraulic conditions. Theoretical basis for an index reach length beyond which single-step computation from end to end of the reach must be in error is developed. Reduction of this reach length by suitable factors tailored to hydraulic conditions yields a mathematically defined allowable reach length for backwater computation. When reach length does not exceed this allowable reach length, no significant error may be detected. Automatic insertion of synthetic cross sections interpolated between surveyed cross sections when these are inadvertently spaced too far apart enables computation to proceed. This device is error-free for prismatic channls but may introduce error for irregular natural channels. Preliminary trials indicate that results so obtained may be accepted provided the fall in the original reach does not exceed from one to two feet. When this is exceeded, additional cross sections should be surveyed.     

Slash fire hazard analysis on the Siskiyou National Forest

Potential increase in fire hazard as a result of timber harvesting is a concern of forest managers throughout the United States. Treating fuels can help reduce unacceptable fire hazards. To evaluate alternative fuel treatments, managers need to know their effects on fire hazard. A decision analysis approach to estimating fire hazard in terms of expected burned area was applied to a watershed in the Siskiyou National Forest (Oregon). Three treatment alternatives (do nothing and two levels of yarding unmerchantable material) were evaluated, and the effects of the treatments were projected over a 90-yr period. Initially, the effects of applying a treatment are small. After 50 years of treatment, the most intense alternative can be expected to show almost a 50% reduction in burned area compared to no treatment. The procedure also estimates burned are by fire size and fire intensity classes. Managers may find this useful for estimating expected fire effects associated with a particular fuel treatment regime.     

FARMERS’ATTITUDES TOWARD GOVERNMENT INVOLVEMENT IN PREVENTING AGRICULTURAL NONPOINT SOURCE WATER POLLUTION1

ABSTRACT: Concern over the pollution of our lakes and streams has become a major issue in the United States. Sedimentation from sigricultural lands has been identified as a significant factor in water pollution. Some citizens suggest that government should force compliance with soil loss standards, while others suggest that we ask farmers to voluntarily comply. Related questions are “DO farmers think government should be involved in controlling erosion and protecting water quality?”“To what extent should government be involved?” What level of government should be involved? Federal? State? Local?“Why should pay for water quality projects?” Farmers from a small watershed in northeastern Indiana were interviewed before and after a major demonstration project. Their responses suggest that farmers feel that individual landowners should be responsible for controlling erosion and agricultural nonpoint source water pollution. However, over 60 percent of the study fanners indicated that the federal government should play an important role, in terms of both technical and financial assistance.     

LABORATORY EXPERIMENTS AS AN AID TO LAKE RESTORATION DECISIONMAKING1

ABSTRACT: The choice of a lake rehabilitation technique can be assisted by laboratory experiments concerned with the composition and properties of the sediments. This work on Sawgrass Lake, Pinellas County, Florida, provides an example of the type of laboratory information that can be useful towards making decisions regarding the most effective restorative techniques. Experiments include chemical analysis of sediment (water content, organic content, pesticides, nutrients), rate of sediment compaction and rehydration at ambient conditions, and the effect of treatment with alum and other chemicals.     

ENVIRONMENTAL FEATURES FOR FLOOD CONTROL CHANNELS1

ABSTRACT: The environmental effects of flood control channel modifications such as clearing and snagging, straightening, enlargement, and/or paving can be quite severe in some cases. Information review reveals that several environmental features have been incorporated into the design, construction, operation, or maintenance of recent flood control channel projects to avoid adverse environmental impacts and enhance environmental quality. Typically, these features have been proposed by conservation agencies and designed with minimal quantitative analysis. Environmental features for channel projects include selective clearing and snagging techniques, channel designs with nonuniform geometry such as single bank modification and floodways, restoration and enhancement of aquatic habitat, improved techniques for placement of excavated material, and revegetation.     

NATURAL EROSION RATES AND THEIR PREDICTION IN THE IDAHO BATHOLITH1

ABSTRACT: Natural rates of surface erosion on forested granitic soils in central Idaho were measured in 40 m² bordered erosion plots over a period of four years. In addition, we measured a variety of site variables, soil properties, and summer rainstorm intensities in order to relate erosion rates to site attributes. Median winter erosion rates are approximately twice summer period rates, however mean summer rates are nearly twice winter rates because of infrequent high erosion caused by summer rainstorms. Regression equation models and regression tree models were constructed to explore relationships between erosion and factors that control erosion rates. Ground cover is the single factor that has the greatest influence on erosion rates during both summer and winter periods. Rainstorm intensity (erosivity index) strongly influences summer erosion rates, even on soils with high ground cover percentages. Few summer storms were of sufficient duration and intensity to cause rilling on the plots, and the data set was too small to elucidate differences in rill vs. interrill erosion. The regression tree models are relatively less biased than the regression equations developed, and explained 70 and 84 percent of the variability in summer and winter erosion rates, respectively.     

Neurotoxic effect and metabolic responses induced by a mixture of six pesticides on the earthworm Aporrectodea caliginosa nocturna

The effects of a mixture of insecticides and/or fungicides at different environmental concentrations were investigated on a Aporrectodea caliginosa nocturna population. This laboratory experiment was carried out in order to reproduce Gaillac (France) vineyard conditions. Neurotoxicity (cholinesterase), metabolisation (glutathione-S-transferase) and oxidative stress (catalase) enzymes were studied as biomarkers in earthworms after short-term exposure in terraria. The aim was to observe the global effects of pesticide exposure, as in a vineyard, rather than focus on each isolated biomarker variation, or on each compound's impact. ChE activity was inhibited after a few days of insecticide and/or fungicide exposure, indicative of a neurotoxic effect in earthworms. The significant increase in GST and CAT activities revealed the metabolisation of these products resulting in the production of reactive oxygen species. After a long period of exposure or high concentrations, earthworms were physiologically damaged: they could not cope with the high toxicity (cellular dysfunction, protein catabolism...). Chemical analysis showed that pesticide bioaccumulation in earthworm tissues, even in those exposed to the highest concentrations and for the longest periods, was very low (under LOD) or absent. However, the study of pesticide residues in terraria after 34 days in a climate chamber suggested that earthworms participate in soil pesticide breakdown.     

Effect of climate change on flux of N and C: air-land-freshwater-marine links: synthesis

Projected climate change might increase the deposition of nitrogen by about 10% to seminatural ecosystems in southern Norway. At Storgama, increased precipitation in the growing season increased the fluxes of total organic carbon (TOC) and total organic nitrogen (TON) in proportion to the water flux. In winter, soil temperatures near 0 degrees C, common under a snowpack, induced higher runoff of inorganic nitrogen (N) and lower runoff of TOC. By contrast, soil temperatures below freezing, caused by little snow accumulation (expected in a warmer world), reduced runoff of inorganic N, TON, and TOC. Long-term monitoring data showed that reduced snowpack can cause either decreased or increased N leaching, depending on interactions with N deposition, soil temperature regime, and winter discharge. Seasonal variation in TOC was mainly climatically controlled, whereas deposition of sulfate and nitrate (NO3) explained the long-term TOC increase. Upscaling to the river basin scale showed that the annual flux of NO3 will remain unchanged in response to climate change projections.     

Design approaches for a cycling adsorbent/photocatalyst system for indoor air purification: formaldehyde example

A kinetic model for a cycling adsorbent/photocatalyst combination for formaldehyde removal in indoor air (Chin et al. J. Catalysis 2006, 237, 29-37) was previously developed in our lab, demonstrating agreement with lab-scale batch operation data of other researchers (Shiraishi et al. Chem. Engineer. Sci. 2003, 58, 929-934). Model parameters evaluated included adsorption equilibrium and rate constants for the adsorbent (activated carbon) honeycomb rotor, and catalytic rate constant for pseudo-first-order formaldehyde destruction in the titanium dioxide photoreactor. This paper explores design consequences for this novel system. In particular, the batch parameter values are used to model both adsorbent and photocatalyst behavior for continuous operation in typical residential home challenges. Design variables, including realistic make-up air fraction, adsorbent honeycomb rotation speed, and formaldehyde source emission rate, are considered to evaluate the ability of the system to achieve World Health Organization pollutant guidelines. In all circumstances, the size of the required rotating adsorbent bed and photoreactor for single-stage operation and the resultant formaldehyde concentration in the home are calculated. The ability of how well such a system might be accommodated within the typical dimensions of commercial ventilation ducts is also considered.