Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Mutagenic and cytotoxic potential of Endosulfan and Lambda-cyhalothrin - In vitro study describing individual and combined effects of pesticides

Excessive use of pesticides poses increased risks to non target species including humans. In the developing countries, lack of proper awareness about the toxic potential of pesticides makes the farmer more vulnerable to pesticide linked toxicities, which could lead to diverse pathological conditions. The toxic potential of a pesticide could be determined by their ability to induce genetic mutations and cytotoxicity. Hence, determination of genetic mutation and cytotoxicity of each pesticide is unavoidable to legislate health and safety appraisal about pesticides. The objective of current investigation was to determine the genotoxic and cytotoxic potential of Endosulfan（EN） and Lambda-cyhalothrin（LC）; individually and in combination. 3-（4,5-Dimethylthiazol-2-yl）-2,5-Diphenyltetrazolium Bromide（MTT） assay was utilized to determine cytotoxicity, while two mutant histidine dependent Salmonella strains（TA98, TA100） were used to determine the mutagenicity of EN and LC.Moreover, mutagenicity assay was conducted with and without S9 to evaluate the effects of metabolic activation on mutagenicity. Even though a dose dependent increase in the number of revertant colonies was detected with EN against both bacterial strains, a highly significant（p 〈 0.05） increase in the mutagenicity was detected in TA98 with S9. In comparison, data obtained from LC revealed less mutagenic potential than EN. Surprisingly,the non-mutagenic individual-concentrations of EN and LC showed dose dependent mutagenicity when combined. Combination of EN and LC synergistically induced mutagenicity both in TA98 and TA100. MTT assay spotlighted comparable dose dependent cytotoxicity effects of both pesticides. Interestingly, the combination of EN and LC produced increased reversion and cytotoxicity at lower doses as compared to each pesticide, concluding that pesticide exposure even at sub-lethal doses can produce cytotoxicity and genetic mutations, which could lead to carcinogenicity.     

Diversity of bacterial isolates during full scale rotary drum composting

Bacterial diversity of full scale rotary drum composter from biodegradable organic waste samples were analyzed through two different approaches, i.e., Culture dependent and independent techniques. Culture-dependent enumerations for indigenous population of bacterial isolates mainly total heterotrophic bacteria (Bacillus species, Pseudomonas species and Enterobacter species), Fecal Coliforms, Fecal Streptococci, Escherichia coli, Salmonella species and Shigella species showed reduction during the composting period. On the other hand, Culture-independent method using PCR amplification of specific 16S rRNA sequences identified the presence of Acinetobacter species, Actinobacteria species, Bacillus species, Clostridium species, Hydrogenophaga species, Butyrivibrio species, Pedobacter species, Empedobactor species and Flavobacterium species by sequences clustering in the phylogenetic tree. Furthermore, correlating physico-chemical analysis of samples with bacterial diversity revealed the bacterial communities have undergone changes, possibly linked to the variations in temperature and availability of new metabolic substrates while decomposing organics at different stages of composting.     

Correction to: Municipal wastewater viral pollution in Saudi Arabia: effect of hot climate on COVID-19 disease spreading

Environmental Science and Pollution Research -     

Autotrophic denitrification using hydrogen oxidizing bacteria in continuous flow biofilm reactor

Autotrophic denitrification was investigated in five bench‐scale upflow attached growth reactors using hydrogen oxidizing bacteria under anoxic conditions. The performance of sand, granular activated carbon (GAC), crushed pumice, crushed volcanic rock, and plastic media were evaluated as the support material. The reactors were inoculated with acclimated cultures obtained from domestic sewage treatment plant. A synthetic solution containing nitrate was used as the influent. The reactor performance was evaluated by measuring influent and effluent nitrate concentration. The design parameters demonstrated that the effectiveness of autotrophic denitrification is comparable to that of the heterotrophic process and may be utilized economically for drinking water treatment either as the main process or as a supplemental process for ion exchange regenerant treatment.     

The semiochemically mediated interactions between bacteria and insects

In natural environment, semiochemicals are involved in many interactions between the different trophic levels involving insects, plants and hosts for parasitoids or prey for predators. These volatile compounds act as messengers within or between insect species, inducing particular behaviours, such as the localisation of a source of food, the orientation to an adequate oviposition site, the selection of a suitable breeding site and the localisation of hosts or prey. In this sense, bacteria have been shown to play an important role in the production of volatile compounds which ones act as semiochemicals. This review, focusing on the semiochemically mediated interactions between bacteria and insects, highlights that bacterial semiochemicals act as important messengers for insects. Indeed, in most of the studies reported here, insects respond to specific volatiles emitted by specific bacteria hosted by the insect itself (gut, mouthparts, etc.) or present in the natural environment where the insect evolves. Particularly, bacteria from the families Enterobacteriaceae, Pseudomonaceae and Bacillaceae are involved in many interactions with insects. Because semiochemicals naturally produced by bacteria could be a very interesting option for pest management, advances in this field are discussed in the context of biological control against insect pests.     

A lysimeter experimental study and numerical characterisation of the leaching of incinerator bottom ash waste

Incinerator bottom ash (IBA) is a residual produced from incinerating municipal solid waste. In the past, IBA presented a big waste disposal problem; however, various recycling approaches have been adopted in recent years to mitigate this problem, as well as to provide a useful alternative to using primary aggregate resources. The use of IBA as an alternative to conventional aggregates in different civil engineering construction applications helps to conserve premium grade aggregate supplies; however, when IBA is in contact with water in the field, as a consequence of precipitation events or changes in water table, elements, such as salts and heavy metals, may be released to the soil and ground water. In this work, IBA waste was mixed with limestone aggregate to produce a blend with acceptable mechanical properties and minimum environmental risks for use as road foundation. The study focused on evaluating potential environmental impacts of some constituents, including sulphate, chloride, sodium, copper, zinc and lead in IBA blends using a lysimeter as a large scale leaching tool. Moreover, a specific scenario simulating field conditions was adopted in the lysimeter to assess the potential impact of changing conditions, such as IBA content in the blend, liquid to solid ratio (L/S) and pH value, on long-term release of heavy metals and salts. Then, numerical modelling was used to predict the release of the aforementioned constituents from IBA based on initial measurement of intrinsic material properties and the kinetic desorption process concept. Experimental results showed that zinc and lead were released in very low concentrations but sodium and sulphate were in high concentrations. The control limestone only blend also demonstrated low release concentrations of constituents in comparison to IBA blends, where constituent concentrations increased with increase in IBA content. Experimental results were compared with numerical results obtained using a non-equilibrium desorption model. Good agreement was found between the two sets of data.     

Blood nickel and chromium levels in association with smoking and occupational exposure among head and neck cancer patients in Tunisia

Chronic exposure to chromium (Cr) and nickel (Ni) has long been recognized as being capable to increase head and neck cancer (HNC) incidence among exposed human populations. This study represents the first biomonitoring of Cr and Ni exposure in Tunisia and focuses on a possible association with HNC risk. The aim of the present study was to evaluate the concentrations of Cr and Ni in the blood of HNC patients and controls. Metals blood levels of 169 HNC patients and 351 controls were determined using a Perkin-Elmer Analyst 800 Atomic Absorption Spectrometer. Mean blood levels of Cr and Ni in HNC cases (52.15 and 111.60 μg/L, respectively) were significantly higher than those of controls (37.04 and 30.50 μg/L, respectively). Cases’ blood levels of Cr and Ni were significantly higher than those of controls after controlling for the other risk factors of HNC, including smoking, shisha consumption, occupational exposure, and nearby environment (P?<?0.05). Among these risk factors, smoking and occupational exposure presented the most significant association with HNC (odds ratio (OR)?=?6.54 and 7.66, respectively, P?<?0.001). Cr and Ni levels in blood sample of cases and controls that are smoker/occupationally exposed were higher than that of non-smoker/non-occupationally exposed (P?<?0.05). Smokers who are occupationally exposed present the most significant association with HNC (OR?=?25.08, P?<?0.0001). High levels of blood Cr (OR?=?2.09) and high levels of blood Ni (OR?=?8.87) were strongly associated with HNC after other potential confounders were controlled (P?=?0.004 and P?<?0.0001, respectively). This study suggested a potential role of Cr and Ni in the mechanism of HNC development.     

Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance

ABSTRACT

This article aims to study the influence of the addition of graphene oxide nanoparticles (GO) to diesel/higher alcohols blends on the combustion, emission, and exergy parameters of a CI engine under various engine loads. The higher alcohols mainly n-butanol, n-heptanol, and n-octanol are blended with diesel at a volume fraction of 50%. Then, the 25 and 50 mg/L concentrations of GO are dispersed into diesel/higher alcohols blends using an ultrasonicator. The GO structures are examined using TEM, TGA, XRD and FTIR. The findings show that there is a reduction in p_max. and HRR when adding higher alcohols with diesel fuel. Regarding engine emission, there is a significant improvement in emissions formation with adding higher alcohols. The addition of GO into diesel/higher alcohols blends improves the brake thermal efficiency by 15%. Moreover, the p_max. and HRR are both enhanced by 4%. The CO, UHC and smoke formation are reduced considerably by 40%, 50 and 20%, respectively, while NO_x level is increased by 30% with adding GO. Finally, adding high percentages of n-butanol, n-heptanol, and n-octanol with diesel fuel with the presence of GO has the potential to achieve ultra-low CO, UHC, and smoke formation meanwhile keeping high thermal efficiency level.     

Seasonal variations of aerosol residence time in the lower atmospheric boundary layer

During a one year period, from Jan. 2002 up to Dec. 2002, approximately 130 air samples were analyzed to determine the atmospheric air activity concentrations of short- and long-lived (222Rn) decay products 214Pb and 210Pb. The samples were taken by using a single-filter technique and gamma-spectrometry was applied to determine the activity concentrations. A seasonal fluctuation in the concentration of 214Pb and 210Pb in surface air was observed. The activity concentrations of both radionuclides were observed to be relatively higher during the winter/autumn season than in spring/summer season. The mean activity concentration of 214Pb and 210Pb within the whole year was found to be 1.4+/-0.27 Bq m(-3) and 1.2+/-0.15 mBq m(-3), respectively. Different 210Pb:214Pb activity ratios during the year varied between 1.78 x 10(-4) and 1.6 x 10(-3) with a mean value of 8.9 x 10(-4) +/- 7.6 x 10(-5). From the ratio between the activity concentrations of the radon decay products 214Pb and 210Pb a mean residence time (MRT) of aerosol particles in the atmosphere of about 10.5+/-0.91 d could be estimated. The seasonal variation pattern shows relatively higher values of MRT in spring/summer season than in winter/autumn season. The MRT data together with relative humidity (RH), air temperature (T) and wind speed (WS), were used for a comprehensive regression analysis of its seasonal variation in the atmospheric air.