Secondary organic aerosol formation from ozone-initiated reactions with nicotine and secondhand tobacco smoke

We used controlled laboratory experiments to evaluate the aerosol-forming potential of ozone reactions with nicotine and secondhand smoke. Special attention was devoted to real-time monitoring of the particle size distribution and chemical composition of SOA as they are believed to be key factors determining the toxicity of SOA. The experimental approach was based on using a vacuum ultraviolet photon ionization time-of-flight aerosol mass spectrometer (VUV-AMS), a scanning mobility particle sizer (SMPS) and off-line thermal desorption coupled to mass spectrometry (TD-GC-MS) for gas-phase byproducts analysis. Results showed that exposure of SHS to ozone induced the formation of ultrafine particles (<100 nm) that contained high molecular weight nitrogenated species (m/z 400–500), which can be due to accretion/acid–base reactions and formation of oligomers. In addition, nicotine was found to contribute significantly (with yields 4–9%) to the formation of secondary organic aerosol through reaction with ozone. The main constituents of the resulting SOA were tentatively identified and a reaction mechanism was proposed to elucidate their formation. These findings identify a new component of thirdhand smoke that is associated with the formation of ultrafine particles (UFP) through oxidative aging of secondhand smoke. The significance of this chemistry for indoor exposure and health effects is highlighted.     

Pesticide residues in fruits and vegetables from Pakistan: a review of the occurrence and associated human health risks

The main objective of the review is to document, assess and analyze the results of the previously reported data on levels of different pesticides in selected fruits and vegetables from Pakistan. The findings of the previous studies clearly indicated that more than 50 % of the samples were contaminated with organophosphate, pyrethroids and organochlorine pesticides. Many studies reported that among fresh fruits and vegetables tomato, apple, melon, mango, grapes, and plum crossed the FAO/WHO permissible limits for these contaminants residual levels. The comparison of other regions showed that observed levels were found above maximum residue limits (MRLs) in 50 % of the samples but were in agreement with the studies from neighboring countries like China and Bangladesh. Higher hazard risk index (HRI) values were calculated for dieldrin, methamidophos, o,p′-DDT, diazinon and p,p′-DDT in apple, mango, banana, melon, potato and onion. The review also highlights that data on pesticide residues in foodstuff is scarce which should be overcome by further extending studies from different areas of Pakistan. In order to ascertain the provision of food suitable for human consumption, it is imperative to monitor pesticides in food commodities by the country’s authorities and enforce guidelines based on permissible limits.     

Dose and frequency dependent effects of olive mill wastewater treatment on the chemical and microbial properties of soil

Olive mill wastewater (OMW) is a problematic by-product of olive oil production. While its high organic load and polyphenol concentrations are associated with troublesome environmental effects, its rich mineral and organic matter contents represent valuable nutrients. This study aimed to investigate the valorization of this waste biomass as a potential soil conditioner and fertilizer in agriculture. OMW was assayed at three doses 50, 100, and 200 m³ ha⁻¹ year⁻¹) over three successive years in olive fields. The effects of the effluent on the physico-chemical and microbial properties of soil-layers were assessed. The findings revealed that the pH of the soil decreased but electrical conductivity and organic matter, total nitrogen, sodium, and potassium soil contents increased in proportion with OMW concentration and frequency of application. While no variations were observed in phosphorus content, slow increases were recorded in calcium and magnesium soil contents. Compared to their control soil counterparts, aerobic bacteria and fungi increased in proportion with OMW spreading rates. The models expressing the correlation between progress parameters and OMW doses were fitted into a second degree polynomial model. Principal component analysis showed a strong correlation between soil mineral elements and microorganisms. These parameters were not related to phosphorus and pH.     

Determination of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) by ICP-OES and their speciation in Algerian Mediterranean Sea sediments after a five-stage sequential extraction procedure

Surface sediment samples (n = 18) were collected from the Algerian Mediterranean coasts and analyzed for seven metals using inductively coupled plasma-optical emission spectrometry in order to asses the distribution and bioavailability of metals and to study the anthropogenic factors affecting their concentrations. Sediment samples were size-fractionated into three sizes: 1,080–500 (coarse), 500–250 (medium), and <250 mm (fine). Bulk sediments were subjected to both sequential extraction and total digestion to evaluate the reliability of the sequential extraction procedure (SEP), while the fractions have been only sequentially extracted for metals speciation. The metals were sequentially extracted into five phases namely exchangeable (P1), carbonates (P2), Fe–Mn oxides (P3), organic (P4) and residual (P5). Metal recoveries in sequential extractions were ±20% of the independently measured total metal concentrations; the high recovery rates indicate the good reliability of the SEP used in this study. Correlation coefficients indicated that the grain size has an effect on the distribution of metals in the investigated samples. The order of metal levels in the fractions was medium > fine > coarse for all the metals. The average total extractable metal concentrations for Cd, Cr, Cu, Fe, Ni, Pb, and Zn were 1.1, 8.8, 4.7, 1,291.3, 13.9, 5.7 and 20.4 μg/g, respectively. The northeastern shelf had the lowest metal levels while the highest were in northwestern part mainly due to the significant tourism activities in the northwestern part. Comparison of our results to Earth’s crust values and to previous studies points out that our samples were relatively unpolluted with respect to the heavy metals investigated; most of the metals are not from anthropogenic sources. Enrichment factors as the criteria for examining the impact of the anthropogenic sources of heavy metals were calculated, and it was observed that the investigated samples were not contaminated with Cr, Cu, and Fe, moderately contaminated with Ni, Pb, and Cd, and contaminated with Cd in some sites. The P5 phase had the highest percents of Cr, Cu, Fe, Ni, and Zn. Cadmium and lead were predominant in the P4 phase, while Cu, Fe and Zn were distributed in the order P5 > P3 > P4 > P2 > P1. The following order of bioavailability was found with the heavy metals Pb > Cr > Cd > Ni > Zn > Cu > Fe.     

Influence of humic fractions on retention of isoproturon residues in two Moroccan soils

The influence of different fractions of soil organic matter on the retention of the herbicide isoproturon (IPU) has been evaluated. Water and methanol extractable residues of (14)C labeled isoproturon have been determined in two Moroccan soils by beta -counting-liquid chromatography. The quantification of bound residues in soil and in different fractions of soil humic substances has been performed using pyrolysis/scintillation-detected gas-chromatography. Microbial mineralization of the herbicide and soil organic matter has been also monitored. Retention of isoproturon residues after 30-days incubation ranged from 22% to 32% (non-extractable fraction). The radioactivity extracted in an aqueous environment was from 20% to 33% of the amount used for the treatment; meanwhile, methanol was able to extract another 48%. Both soils showed quantities of bound residues into the humin fraction higher than humic and fulvic acids. The total amount of residues retained into the organic matter of the soils was about 65 % of non-extractable fraction, and this percentage did not change with incubation time; on the contrary, the sorption rate of the retention reaction is mostly influenced by the clay fraction and organic content of the soil. Only a little part of the herbicide was mineralized during the experimental time.     

Determination of heavy metals in fresh water fish species of the River Ravi, Pakistan compared to farmed fish varieties

The untreated industrial and sewage wastes arising from industries and metropolitan activities make their passage to the River Ravi, Pakistan, where Balloki Headworks is one of the major sites of effluent concentration. This study was designed to evaluate the concentration of various toxic elements in fishes of that area compared to a nearby fish farm. The concentrations of heavy metals, such as As, Cd, Cu, Pb, Hg, and Zn, and electrolytes Ca, K, and Na were determined in different edible and non-edible fresh water fish varieties. Fish samples were collected from two selected sites and were analyzed for aforementioned elements. Higher levels of As (35.74–45.33 ppm), Cd (0.35–0.45 ppm), Pb (2.1–3.0 ppm), Hg (83.03–92.35 ppm) while normal levels of Zn (37.85–40.74 ppm) and Cu (1.39–2.93 ppm) were observed. Mercury, higher levels of which trigger cough, impairment of pulmonary function, and psychotic reactions, was significantly higher in all studied categories. At the sites under study, there has been observed alarming levels of toxic metals which are needed to be monitored regularly.     

Effects of long-term irrigation with treated wastewater on soil quality,soil-borne pathogens,and living organisms: case study of the vicinity of El Hajeb (Tunisia)

Medium (i.e. 15 years) and long-term (i.e. 20 years) impact of irrigation using secondary-treated municipal wastewater (TWW) was assessed on two agricultural soil samples, denoted by E and G, respectively, in the vicinity of El Hajeb region (Southern Tunisia). Soil pH, electrical conductivity particle size grading, potential risk of salinity, water holding capacity and chemical composition, as well as organic matter content, pathogenic microorganisms and heavy metal concentrations in the TWW-irrigated (E and G) and rainwater-irrigated (T) soils at various depths, were monitored and compared during a 5-year experiment. Our study showed that bacterial abundance is higher in sandy–clayey soil, which has an enhanced ability to retain moisture and nutrients. The high level of bacterial flora in TWW-irrigated soils was significantly (p?<?0.05) correlated (r?=?~0.5) with the high level of OM. Avoidance assays have been used to assess toxic effects generated by hazards in soils. The earthworms gradually avoided the soils from the surface (20 cm) to the depth (60 cm) of the G transect and then the E transect, preferring the T transect. The same behaviour was observed for springtails, but they seem to be less sensitive to the living conditions in transects G and E than the earthworms. The avoidance response test of Eisenia andrei was statistically correlated with soil layers at the sampling sites. However, the avoidance response test of Folsomia candida was positively correlated with silt-clay content (+0.744*) and was negatively correlated with sand content (?0.744*).     

Biochemical properties of some Salvia L. species

Antioxidant capacity, total phenol and mineral contents of aerial parts of sage belonging to some Salvia species were established. The lowest and highest antioxidant values of Salvia dichroantha Stapf and Salvia heldreichiana Boiss. ex Benth. extracts were found as 73.855 and 80.207 mg GAE/g, respectively. While the highest total phenol was established in Salvia tomentosa Mil. (13.316 mg GAE/100 ml), the lowest level was found in Salvia halophila Hedge (6.168 mg GAE/100 ml). While K contents of plants changed between 14,518 and 24,171 mg/kg, Ca contents ranged between 12,402 and 18,553 mg/kg. P and Mg contents were found low compared with K and P values of plants. Mg content was changed between 2,118 and 2,914 mg/kg; the mean was calculated as 2,496 mg/kg. P contents of plants were determined between 1,385 to 1,910 mg/kg. As a microelement, Fe was found at the highest level. Fe contents of plants were found between 179 and 782 mg/kg.     

The potential of different bio adsorbents for removing phenol from its aqueous solution

The use of natural resources for the removal of phenol and phenolic compounds is being looked upon by researchers in preference to other prevailing methods. In the present study, different biosorbents, brown algae (Padina pavonia), fresh water macrophyta (Ceratophyllum demersum), and black tea residue, were tested as adsorbent for the removal of phenol from aqueous solutions. The optimum conditions for maximum adsorption in terms of concentration of the adsorbate and pH were identified. The results show that the initial concentration increases as the removal of phenol increases in C. demersum; in the case of the other two adsorbents, the initial concentration increases as the removal of phenol decreases, especially for an initial concentration lower than 100 and 1,000 μg/L for P. pavonia and black tea residue, respectively. Maximum percentage removal of phenol by each adsorbent is 77, 50.8, and 29 % for C. demersum, P. pavonia, and black tea residue, respectively. Also, the biosorption capacity was strongly influenced by the pH of the aqueous solution with an observed maximum phenol removal at pH of around 6–10. The first biosorbent (black tea residue) displays the maximum adsorption capacity at a pH of 10 with a percentage sorption capacity of 84 %; P. pavonia revealed a greater adsorption percentage at pH?10, reaching 30 %, while for C. demersum, the removal of phenol increases with the increase in initial pH up to 6.0 and decreases drastically with further increase in initial pH. The Freundlich, Langmuir, and Brauner–Emmet–Teller adsorption models were applied to describe the equilibrium isotherms. The results reveal that the equilibrium data for all phenol adsorbents fitted the Freundlich model which seemed to be the best-fitting model for the experimental results with similar values of coefficient of determination.     

Monitoring of growth and physiological activities of biofilm during succession on polystyrene from activated sludge under aerobic and anaerobic conditions

The present research work monitored the successive biofilm development and its catabolic role in the degradation of polystyrene (PS). PS material was artificially colonized with biofilm by incubating it with activated sludge under aerobic and anaerobic conditions. Biofilm formation was monitored by gravimetric weight analysis, spectrophotometric absorbance technique, heterotrophic plate count, and scanning electron microscopy under aerobic and anaerobic conditions. The wet weight (1.59 and 1.17 g) and dry weight (0.41 and 0.08 g) of a biofilm showed a significant constant increase under aerobic and anaerobic conditions, respectively, from first till 9 weeks of incubation. Plate count of the selected bacteria (Escherichia coli, Salmonella typhimurium, Shigella dysenteriae, Pseudomonas aeruginosa) considerably declined (90–99 %) in the biofilm after seventh and fifth weeks of incubation under aerobic and anaerobic conditions, respectively, indicating a positive shift from pathogenic to beneficial microbial community. While most probable number index of fecal coliforms and E. coli in the sludge showed more reduction (98 and 99 %) under aerobic as compare to anaerobic conditions (86 and 91 %) after 9 weeks of biofilm formation on PS cubes. Correspondingly, the decreasing levels of chemical oxygen demand and biochemical oxygen demand (up to 73 %) showed signs of sludge digestion. Scanning electron microscope coupled with energy dispersive X-ray spectroscope revealed nature of PS media containing high carbon content. However, biofilm development proved to be involved in the biochemical transformation of the PS medium as indicated by Fourier transform infrared spectroscopy.