化学毒剂的个人防护装备发展及使用概况

本文介绍了各类防毒服和防毒面具的发展历史、各国的研究情况,对装备的穿戴情况和时机作了简要的概括.最后对未来个人防护装备发展趋势进行展望,阐明了未来装备发展的重点和方向.     

长广七矿通风阻力测定及分析

矿井通风阻力测定是矿井安全管理工作的重要内容之一。本文介绍了气压计基点法的测定原理及测定步骤,并将该方法应用于长广七矿通风系统阻力的测定中,通过对测定数据的整理分析,揭示了该矿通风阻力分布和风量分配的基本情况,并针对存在的问题提出了相应的技术对策,为该矿井实现通风管理的科学化和制订合理的技术改造方案提供基本依据。     

Simulation of dam/levee-break hydrodynamics with a three-dimensional implicit unstructured-mesh finite element model

Dam failures usually cause huge economic and life losses , especially in urban areas where there is a high concentration of inhabitants and economic actors. In order to understand the physical mechanisms of the formation and development of dam-break flooding, lots of efforts have been put into different types of modelling techniques. However, most of existing models are 1D (one-dimensional) or 2D models based on the shallow water equations. In this paper, we present a 3D numerical modelling investigation of dam-break flow hydrodynamics in an open L-shape channel. A newly developed 3D unstructured mesh finite element model is used here. An absorption-like term is introduced to the Navier–Stokes equations in order to control the conditioning of the matrix equation in the numerical solution process and thus improve the stability. A wetting and drying algorithm is used here to allow the free surface height to be treated with a high level of implicitness and stability. The 3D model has been validated by comparing the results with the published experimental data. Good agreement has been achieved at six selected locations. This study shows that the 3D unstructured mesh model is capable of capturing the 3D hydraulic aspects and complicated local flows around structures in simulation of dam-break flows.     

Role of illumination intensity in microcystin development using Microcystis aeruginosa as the model algae

Environmental Science and Pollution Research - Microcystis aeruginosa (M. aeruginosa) is one of the most common genera of cyanobacteria in algal blooms. In the present work, the impact of the...     

Kinetics and mechanism for omethoate degradation by catalytic ozonation with Fe(III)-loaded activated carbon in water

The kinetics and mechanism for degradation of omethoate (OMT) by catalytic ozonation with Fe(III)-loaded activated carbon (Fe@AC) were investigated in this study with focus on identification of degradation byproducts. The rate constants of OMT reacting with ozone and hydroxyl radical (OH) were determined to be 0.04 and 5.3 × 10⁸ M^?1 s^?1 at pH 7.5 and 20 °C, respectively. OMT was predominantly degraded by OH in the catalytic ozonation with Fe@AC. The high-molecular-weight degradation byproducts identified were O,O,O-trimethyl phosphoric ester (TMP), pyrrolidin-2-one, N-methyl-2-sulfanylacetamide, 2-(methylthio)acetamide, O,O,S-trimethylthiophosphate (STMP), and N-methyl-2-(methylthio)acetamide. Besides, low-molecular-weight organic acids and inorganic anions were also detected and quantified, including formic, acetic and oxalic acids as well as nitrate, sulfate and phosphate ions. In the catalytic ozonation, TMP and phosphate were two major P-containing byproducts resulting from OMT degradation. The toxicity of OMT solution gradually decreased during the catalytic ozonation, indicating that Fe@AC is a safe catalyst for OMT removal by ozone in water.     

Air–water exchange fluxes of polycyclic aromatic hydrocarbons in the tropical coast,Taiwan

Air–water exchange fluxes of polycyclic aromatic hydrocarbons (PAHs) were simultaneously measured in air and water samples from two sites on the Kenting coast, located at the southern tip of Taiwan, from January to December 2010. There was no significant difference in the total PAH (t-PAH) concentrations in both gas and dissolved phases between these two sites due to the less local input which also coincided to the low levels of t-PAH concentration; the gas and dissolved phases averaged 1.29 ± 0.59 ng m^?3 and 2.17 ± 1.19 ng L^?1 respectively. The direction and magnitude of the daily flux of PAHs were significantly influenced by wind speed and dissolved PAH concentrations. Individual PAH flux ranged from 627 ng m^?2 d^?1 volatilization of phenanthrene during the rainy season with storm–water discharges raising dissolved phase concentration, to 67 ng m^?2 d^?1 absorption of fluoranthene during high wind speed periods. Due to PAH annual fluxes through air–water exchange, Kenting seawater is a source of low molecular weight PAHs and a reservoir of high molecular weight PAHs. Estimated annual volatilization fluxes ranged from 7.3 μg m^?2 yr^?1 for pyrene to 50 μg m^?2 yr^?1 for phenanthrene and the absorption fluxes ranged from ?2.6 μg m^?2 yr^?1 for chrysene to ?3.5 μg m^?2 yr^?1 for fluoranthene.     

湿法净化黑烟中添加剂对炭黑沉降性能的影响

湿法净化黑烟中炭黑颗粒物的关键在于降低吸收液的表面张力并以高性能絮凝剂使其从溶液中絮凝、沉降以利于分离。选用十六烷基三甲基溴化胺(CTAB)为主要表面活性剂,使之与十二烷基苯磺酸钠(SDBS)和月桂醇聚氧乙烯(9)醚(AEO-9)进行复配实验,研究了复配液的表面张力,再向最低表面张力的复配表面活性剂溶液中投加絮凝剂聚合氯化铝(PAC)和聚丙烯酰胺(PAM),探讨絮凝剂的添加对黑烟颗粒沉降和絮凝的影响.实验结果表明:同时添加表面活性剂CTAB,SDBS和PAC,并使之浓度分别为0.5 mmol/L,0.4 mmol/L和200 mg/L时,炭黑颗粒的沉降效果最好,沉降率高达94%,且絮凝体较大,沉降时间仅为2 min。     

双室微生物燃料电池处理硝酸盐废水

基于双室微生物燃料电池(microbial fuel cell,MFC),针对阴极分别接种活性污泥(A-MFC)和反硝化细菌(D-MFC),研究其产电情况和硝酸盐废水去除效果。结果表明,在产电的同时都可有效去除废水中的硝酸盐污染物。在外接电阻100Ω的情况下,2种MFC均具有良好的产电性能,A-MFC和D-MFC达到的最大输出电压分别为119.6 mV和117.2mV,最大功率密度分别为23.40 mW/m2和26.63 mW/m2;同时两者在阴极室的平均反硝化速率分别为1.86 mg/(L.d)和2.19 mg/(L.d),阳极室的平均COD去除率分别为81.9%和82.4%。另外,通过扫描电镜观察可知,A-MFC和D-MFC阴极碳布表面形貌存在差异,并且阳极与阴极碳布表面形貌差异显著。     

超滤膜深度处理染整废水的膜污染机理

实验采用不同规格和材料的超滤膜进行染整二级尾水分离实验,对超滤膜污染机理及影响因素进行了分析。实验采用红外光谱分析了聚醚(PES)膜、聚砜(PSF)膜和聚醚酰亚胺(PEI)膜3种超滤膜材料,对比了污染前后膜面的接触角以及不同切割分子量对膜通量及出水水质的影响,并利用线性化的Herman堵塞模型拟合了不同分子量超滤膜的堵塞模型,初步探讨了超滤膜的污染机理。实验结果表明,膜材料表面亲水性基团的多少与初始膜通量大小成正比,出水COD值随超滤膜切割分子量减小而减小。切割分子量同为2 000 Da的3种超滤膜中,PES膜的处理效果最佳,出水COD平均值为47.81 mg/L;PEI膜通量最高,平衡通量可达50 L/(m2.h);切割分子量为1 000、10 000的超滤膜堵塞机理符合滤饼过滤模型,100 000的超滤膜堵塞机理更接近于完全堵塞模型;1 000的聚醚砜材质膜(PES)更适合此类废水的深度处理。     

柠檬酸对褐土中DTPA提取态铜、镉含量及对紫花苜蓿吸收铜、镉的影响

为了阐述有机酸对土壤中重金属生物有效性的影响,通过盆栽实验,研究了Cu、Cd复合污染下柠檬酸对褐土中二乙基三胺五乙酸(DTPA)提取态铜和镉含量的影响,并探讨了柠檬酸对植物吸收铜、镉的影响。结果表明,土壤中DT-PA-Cu含量随柠檬酸添加量的增加而减小,添加高浓度铜(Cu 1 000)处理中,DTPA-Cu含量减小更明显。在添加低铜浓度(Cu600)处理下,柠檬酸添加量为2和12 mmol/kg时,土壤DTPA-Cu含量随土壤镉含量的增加而增加,而柠檬酸含量为5mmol/kg时,DTPA-Cu含量在低镉处理(Cd 1)时含量最低。紫花苜蓿中铜含量随柠檬酸添加量的增加明显降低。土壤中DTPA-Cd含量随柠檬酸添加量的增加而减小,且随铜添加量的增加而降低。紫花苜蓿中的镉含量随柠檬酸添加量的增加先增加后减小;在相同柠檬酸添加量处理时,紫花苜蓿中镉的含量随镉含量的增加而增加;在低镉处理下,铜的加入对较低柠檬酸浓度时紫花苜蓿镉含量影响不明显,但柠檬酸浓度为12 mmol/kg时,紫花苜蓿中镉含量随铜添加量的增加而明显增加。