Effects of noise pollution over the blood serum immunoglobulins and auditory system on the VFM airport workers, Van, Turkey

Noise pollution is a common health problem for developing countries. Especially highways and airports lead to noise pollution in different levels and in many frequencies. In this study, we focused on the effect of noise pollution in airports. This work aimed measurements of noise pollution levels in Van Ferit Melen (VFM) airport and effect of noise pollution over the immunoglobulin A, G, and M changes among VFM airport workers in Turkey. It was seen that apron and terminal workers were exposed to high noise (>80 dB(A)) without any protective precautions. Noise-induced temporary threshold shifts and noise-induced permanent threshold shifts were detected between the apron workers (p?<?0.001) and terminal workers (p?<?0.005). IgA values of apron terminal and control group workers were approximately the same in the morning and increased in a linear manner during the day. This increase was statistically significant (p?<?0.001). IgG and IgM values of apron, terminal, and control group workers were approximately same in the morning. Apron and terminal workers IgG and IgM levels were increased until noon and then decreased until evening as compare to control group, but these changes were not statically significant (p?>?0.05). These findings suggested that the noise pollution in the VFM airport could lead to hearing loss and changes in blood serum immunoglobulin levels of airport workers. Blood serum immunoglobulin changes might be due to vibrational effects of noise pollution. Airport workers should apply protective precautions against effect of noise pollution in the VFM airport.     

Fate of selected pharmaceuticals in hospital and municipal wastewater effluent: occurrence,removal, and environmental risk assessment

The concentrations and distribution of β-blockers, lipid regulators, and psychiatric and cancer drugs in the influent and effluent of the municipal wastewater treatment plant (WWTP) and the effluent of 16 hospitals that discharge into the wastewater treatment plant mentioned in this study at two sampling dates in summer and winter were examined. The pharmaceutical contribution of hospitals to municipal wastewater was determined. The removal of target pharmaceuticals was evaluated in a WWTP consisting of conventional biological treatment using activated sludge. Additionally, the potential environmental risk for the aquatic receiving environments (salt lake) was assessed. Beta-blockers and psychiatric drugs were detected in high concentrations in the wastewater samples. Atenolol (919 ng/L) from β-blockers and carbamazepine (7008 ng/L) from psychiatric pharmaceuticals were detected at the highest concentrations in hospital wastewater. The total pharmaceutical concentration determined at the WWTP influent and effluent was between 335 and 737 ng/L in summer and between 174 and 226 ng/L in winter. The concentrations detected in hospital effluents are higher than the concentrations detected in WWTP. The total pharmaceutical contributions from hospitals to the WWTP in summer and winter were determined to be 2% and 4%, respectively. Total pharmaceutical removal in the WWTP ranged from 23 to 54%. According to the risk ratios, atenolol could pose a high risk (risk quotient > 10) for fish in summer and winter. There are different reasons for the increase in pharmaceutical consumption in recent years. One of these reasons is the COVID-19 pandemic, which has been going on for 2 years. In particular, hospitals were operated at full capacity during the pandemic, and the occurrence and concentration of pharmaceuticals used for the therapy of COVID-19 patients has increased in hospital effluent. Pandemic conditions have increased the tendency of people to use psychiatric drugs. It is thought that beta-blocker consumption has increased due to cardiovascular diseases caused by COVID-19. Therefore, the environmental risk of pharmaceuticals for aquatic organisms in hospital effluent should be monitored and evaluated.

     

UV-C light-enhanced photo-Fenton oxidation of methyl parathion

The photodegradation of aqueous solutions containing 0.2 mM methyl parathion has been studied through the optimization of the [H₂O₂]/[Fe³⁺] ratio in a Fe³⁺/H₂O₂/UV-C flow system of 1.3 L capacity. The decay kinetics and TOC abatement have been analyzed for the experiments performed at pH 3.0 and room temperature. All experiments lead to the total methyl parathion destruction after a few minutes, following a pseudo-first-order decay kinetics. Total mineralization can be reached after 120 min at the optimum ratio found, due to the synergistic effect of the very oxidizing hydroxyl radical (^·OH) produced via the Fenton reagent and the effective photodecarboxylation at 253.7 nm.     

Experimental investigation of cross-shore sandbar volumes

Sandbars are critical to the cross-shore movement of sediment. Prediction of cross-shore sandbar volumes requires knowledge about the functional relationship of sediment transport rate conditions with waves, currents, base slope, sediment property and water depth. In this study, experiments on cross- shore sediment transport were carried out in a laboratory wave channel for initial base slopes of 1/8, 1/10 and 1/15. Using regular waves with different deep-water wave steepness generated by a pedal-type wave generator, bar volumes caused by cross-shore sediment transport are investigated for beach materials with the medium diameter of d₅₀?=?0.25, 0.32, 0.45, 0.62 and 0.80 mm. A non-dimensional equation for sandbar volume was obtained by using linear and non-linear regression methods through the experimental data and was compared with previously developed equations in the literature. The results have shown that the experimental data fitted well to the proposed equation with respect to the previously developed equations.     

Comparison of phytotoxic effects of bio-synthesised copper oxide nanoparticle and ionic copper on Elodea canadensis

This study aims to investigate the phytotoxic effects of both Punica granatum peel extract directed copper oxide nanoparticles (CuONPs) and copper nitrate on Elodea canadensis. The CuONPs were characterised by UV–visible spectroscopy (UV-Vis), Dynamic Light Scattering (DLS), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FT-IR) Spectroscopy. The ratio of photosynthetic pigments, total soluble protein, malondialdehyde (MDA), catalase (CAT), ascorbate peroxidase (APX), and copper accumulation in the E. canadensis was determined to evaluate the phytotoxicity of the CuONPs and copper nitrate on E. canadensis. The significant improvements were observed in the growth rate of E. canadensis, chlorophyll a and b, carotenoid contents, and total soluble protein in the E. canadensis when it was exposed to the CuONPs. Additionally, CAT and APX activities and MDA contents were enhanced by accumulation of the CuONPs into the E. canadensis. These results suggested that oxidative stress was alleviated, owing to the result of an increase in the antioxidants such as CAT and APX, with an increase in the concentration of the CuONPs. Finally, the findings of this study show that copper nitrate has many negative effects on E. canadensis compared bio-synthesised CuONPs.     

Antimicrobial Activity of the Chitosan Extracted from Metapenaeus stebbingi Shell Wastes

In the study, chitosan chemically extracted from Metapenaeus stebbingi shells obtained from shrimp processing factories and commercial chitosan were used as antimicrobial materials. Antimicrobial activities of the chitosans dissolved in acetic, lactic, formic and hydrochloric acid at different concentrations (1.00, 0.50, 0.25, 0.10 and 0.05%) were tested in vitro by using the disk diffusion method with standard microorganisms (Pseudomonas putida, Pseudomonas fluorescens, Vibrio parahaemolyticus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli 1, Escherichia coli 2, Listeria monocytogenes, Enterecoccus faecalis, Aeromonas caviae). On the other hand, gentamicin was used as positive control. Antimicrobial test results indicated that chitosan demonstrated different effects depending on the chitosan concentration, solvent material and bacteria type. In the present study, both the extracted and commercial chitosans were observed to have antimicrobial effects on nearly all types of the bacteria.     

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H₂O₂ dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H₂O₂ concentration while further concentration values led to a decrease in TOC abatement efficiency. Then, the effect of different concentrations of Fenton’s reagents was studied for homogeneous Fenton process. Obtained results revealed that 0.25 mM Fe³⁺ and 20 mM H₂O₂ were the best conditions, achieving 80 % TOC removal efficiency at 4 h treatment. Furthermore, heterogeneous PF treatment was developed using iron-activated carbon as catalyst. It was demonstrated that this catalyst is a promising option, reaching 67 % of TOC removal within 4 h treatment without formation of iron leachate in the medium. In addition, two strategies of enhancement for process efficiency are proposed: coupling of PF with electro-Fenton (EF) process in two ways: photoelectro-Fenton (PEF) or PF followed by EF (PF-EF) treatments, achieving in both cases the complete mineralization of DIA solution within only 2 h. Finally, the Microtox tests revealed the formation of more toxic compounds than the initial DIA during PF process, while, it was possible to reach total mineralization by both proposed alternatives (PEF or PF-EF) and thus to remove the toxicity of DIA solution.     

Strength and durability characterization of pelletized coal–biomass household briquettes

Increase in waste sludge disposal is always seen as a problem from the point of production industry. However, it is clear that the reuse and recycle of sewage sludge could be a serious economic input. The most important action should be to determine the sludge characterizations and direct the producers towards appropriate reuse and recycling opportunities. In this study, reuse method was examined to produce coal briquette, which will constitute an example for waste sludge. In order to make use of the waste sludge, five different coal briquette samples were produced by mixing powdered coal and bitumen together with waste sludge, at different ratios. The overall results indicated that the sample named CB3 having 70% powdered coal, 20% waste sludge, and 10% bitumen was found to be the optimum coal briquette among the other samples produced. The proximate analysis of the optimum briquette sample was carried out according to the Turkish standards and regulations and it was found out that the produced briquette coal can have commercial value with a gross calorific value of 30.03 MJ/kg and 7.30% ash content.     

Efficiency of Modified Composite Biosorbent for Bioremoval of Phosphate Ions in Aqueous Area: Process Modeling Studies

This paper was focused on the biosorption of phosphate ions from aqueous solution onto the cetyltrimethylammonium bromide (CTAB) modified multi-component biosorbent composed of pine, oak, hornbeam and fir sawdust biomasses. A series of batch tests were conducted and the effects of solution pH, ion concentration, quantity of biosorbent and contact time on the bioremoval of phosphate ions were investigated. The biosorption data of kinetic and equilibrium were modeled using various mathematical equations. The phosphate removal increased with increased ion concentration and decreased with increased pH and biosorbent quantity values. The equilibrium state was reached within 120 min of exposure time. The process kinetics was best described by Elovich model while the isotherm data of biosorption best obeyed Freundlich equation. The obtained results revealed that the use of CTAB modified mix sawdust biosorbent presented interesting options for bioremediation of contaminated environments and waste recycling (as nutrient fertilizer and compost material).     

Energy and exergy analysis of a heat storage tank with a novel eutectic phase change material layer of a solar heater system

Solar energy is one of the most important renewable energy sources, but it is not available every time and every season. Thus, storing of solar energy is important. One of the popular methods of heat storage is use of phase change materials (PCMs) which have large thermal energy storage capacity. In this study, the heat storage tank in a domestic solar water heating system was chosen as control volume. The experiments were performed in the province of Elaz?g, Turkey, in November when solar radiation was weak due to cloudy sky. The heat storage tank of the system was modified to fill PCM between insulation and hot water part. A few PCMs which are Potassium Fluoride, Lithium Metaborate Dihydrate, Strontium Hydroxide Octahydrate, Barium Hydroxide Octahydrate, Aluminum Ammonium Sulfate, and Sodium Hydrogen Phosphate were analyzed to proper operating conditions using a Differential Scanning Calorimeter (DSC) and the best PCM was obtained with the Aluminum Ammonium Sulfate and Sodium Hydrogen Phosphate mixture. Thus, eutectic PCM was obtained and used in a heat storage tank of the solar water heating system. Energy and exergy analysis of heat storage tank was performed with and without the PCM. Energy and exergy analysis has shown that the heat storage tank with the PCM is more efficient than without the PCM and the maximum exergy efficiency was obtained as 22% with the heat storage tank with the PCM.