英国的医疗废物分类管理方法

本文简要介绍了英国对医疗废物的分类，以及根据废物管理的等级制度．对医院垃圾实行的分类收集方法．以期能对我国完善有关医院垃圾分类收集的规章制度提供建议。     

Simulating dairy liquid waste management options as a nitrogen source for crops

Large scale dairy operations are common. In many cases the manure is deposited on a paved surface and then removed with a flushing system, after which the solids are separated, the liquid stored in ponds, and eventually the liquid applied on adjacent crop land. Management of liquid manure to maximize the fertilizer value and minimize water quality degradation requires knowledge of the interactive effects of mineralization of organic N (ON) to NH₄⁺, crop uptake of mineral N, and leaching of NO₃⁻ on a temporal basis. The purpose of the research was to use the ENVIRO-GRO model to simulate how the amount of applied N, timing of N application, ON mineralization rates, chemical form of N applied, and irrigation uniformity affected (1) yields of corn (Zea mays) in summer and a forage grass in winter in a Mediterranean climate and (2) the amount of NO₃⁻ leached below the root zone. This management practice is typical for dairies in the San Joaquin Valley of California. The simulations were conducted for a 10-year period. Steady state conditions, whereby an equivalent amount of N applied in the organic form will be mineralized in a given year, are achieved more rapidly for materials with high mineralization rates. Both timing and total quantity of N application are important in affecting crop yield and potential N leaching. Major conclusions from the simulations are as follows. Frequent low applications are preferred to less frequent higher applications. Increasing the amount of N application increased both the crop yield and the amount of NO₃⁻ leached. Increasing irrigation uniformity increased crop yields but had variable effects on the amount of NO₃⁻ leached. A winter forage crop following a summer corn crop effectively reduced the leaching of residual soil N following the corn crop.     

大理市生活垃圾焚烧处置初探

针对大理生活垃圾污染现状,提出采用高温焚烧方法处理大理市产生的城市生活垃圾的必要性,并用垃圾焚烧产生的热能发电.采取相应的措施防治燃烧过程中产生的污染物,可最终实现垃圾处理的减量化、无害化、资源化要求.     

沈阳市“十一五”期间的空气污染防治

根据沈阳市环境空气面临的问题,确定“十一五”期间空气环境质量保护目标、指标,提出改善空气环境质量的对策措施,保证沈阳市大气环境质量的持续改善。     

石墨炉原子吸收光谱法测定轻质油中痕量砷时样品前处理方法的探讨

研究了轻质油中痕量砷的几种样品处理方法。实验表明，石墨炉原子吸收光谱法测定时，用碘-甲苯和H2O2-HNO3相结合处理轻质油样品较为合适，萃取效率可达90％。并对影响萃取测定的其它因素作了初步探讨。     

经济全球化背景下中国环境问题及应对策略

文章从经济全球化的定义出发,论述了全球化使中国环境问题变成了世界的环境问题,因为中国的环境问题是由世界造成的,同时中国的环境问题也影响到世界.要从根本上解决中国环境问题,必须树立科学发展观,促进创新型国家的建设,重视对外贸易中的环境问题,严防国外环境污染向国内转移.     

淮河流域多闸坝河流COD综合衰减系数测算

提出在多闸坝河流上，利用枯水期断面化学需氧量同步监测数据测算COD综合衰减系数的方法，用该方法测算河南省辖河流域部分河流COD综合减系数在0．08－0．341/d。并用实际监测结果进行检验。     

目前环境污染治理存在的问题及对策

本文论述了目前环境污染治理技术及其在应用中存在的问题。由于环境污染治理技术本身的局限性以及人们观念等原因 ,目前的环境污染治理存在一定的局限性 ,如何认识并克服它成为一个不容忽视的问题 ;并提出有实施污染治理过程中 ,必须用持续发展的理论进行指导 ,将污染物的污染防治战略转变为污染防止战略即“清洁生产”战略     

STC脉冲喷吹袋式除尘器在机立窑烟气除尘脱硫中的应用

介绍了STC脉冲喷吹袋式除尘器的自动控温、外滤除尘、自控离线脉冲喷吹清灰的工作原理和特点 ,监测数据说明该除尘器成功解决了机立窑消烟、除尘和脱硫问题     

耐热粉末铝合金筒体热旋成形试验

介绍了喷射沉积耐热铝合金管坯经挤压变形 ,变薄旋压筒体的研制过程 ;重点论述了热旋成形筒体的工艺路线。试验探讨了耐热铝合金的旋压温度为 35 0～ 45 0℃ ,道次变薄率约为2 0 % ,累计变薄率约 5 0 % ,需中间退火 ,退火温度宜取 35 0℃。热旋结果认为 ,喷射沉积耐热粉末铝合金铸坯直接热旋成形困难 ,需经挤压比大于 4的变形致密 ,有助于热旋成形。耐热粉末铝合金挤压坯加热变薄旋压 ,应采用小压下量多道次的变形过程 ,逐渐细化晶粒组织 ,才能旋出综合性能良好的筒形件。