A simple approach to modeling microbial biomass in the rhizosphere

Microorganisms make an important contribution to the degradation of contaminants in bioremediation as well as in phytoremediation. An accurate estimation of microbial concentrations in the soil would be valuable in predicting contaminant dissipation during various bioremediation processes. A simple modeling approach to quantify the microbial biomass in the rhizosphere was developed in this study. Experiments were conducted using field column lysimeters planted with Eastern gamagrass. The microbial biomass concentrations from the rhizosphere soil, bulk soil, and unplanted soil were monitored for six months using an incubation–fumigation method. The proposed model was applied to the field microbial biomass data and good correlation between simulated and experimental data was achieved. The results indicate that plants increase microbial concentrations in the soil by providing root exudates as growth substrates for microorganisms. Since plant roots are initially small and do not produce large quantities of exudates when first seeded, the addition of exogenous substrates may be needed to increase initial microbial concentrations at the start of phytoremediation projects.     

Uranium Accumulation of Crop Plants Enhanced by Citric Acid

Citric acid was applied to soil to enhance U accumulation in four crop plants. While the highest enhanced U accumulation of aboveground tissues (a.c. 2000 mg kg⁻¹ dry weight) occurred in the leaves of Indian mustard (Brassica juncea), the highest enhanced U accumulation of roots (a.c. 3500 mg kg⁻¹ dry weight) occurred in canola (Brassica napus var. napus). Uranium translocation among tissues of test plants is in the relation of roots>shoots ≅ leaves. The flowers of sunflower (Helianthus annuus) contained similar or higher U concentrations than those found in shoots, but concentrations in seeds are close to zero. In conclusion, Indian mustard is recommended as a potential species for phytoextraction for U-contaminated soil due to its high U accumulation of aboveground biomass (a.c. 2200 μg per plant). There is no evidence that two types of soils cause a significant difference of the enhanced U accumulation (p<0.05). Results, however, indicate that additional citric acid may result in downward U migration that may contaminate groundwater. Speciation of U that is taken up by plants is also discussed in the end.     

城市污水脱氮除磷方法探讨

本文综述了城市污水脱氮降磷工艺的几种主要方法，指出生物法因工艺简单、处理能力强、运行方式灵活等优点已成为近年来一种污水处理的重要方法，得到广泛应用。     

1420Al-Li合金超塑特性及微成形

采用最大载荷法研究了 14 2 0Al Li合金的超塑特性 ,根据试验获得的超塑特性参数 ,采用两种形式的模具对 14 2 0Al Li合金的微成形性进行了研究。分析了成形压力、保压时间对微成形的影响 ,采用扫描电镜和金相显微镜分析了成形件的微观形貌 ,更好地理解了材料在微成形时的行为。     

Using sustainable development indicators as a supplementary measure for the integrated management of environmental information system in Taiwan

Environmental Information System (EIS) transfers environmental data and information to audiences in any field of knowledge or activity interested in environmental problems. Currently, numerous conventional EISs or Environmental Databases (EDs) are available in Taiwan. However, they fail to adequately address the strong correlations among the environmental, social and economic components. Notably, Sustainable Development Indicators (SDIs) combine environmental, social and economic dimensions, as well as illustrate the links among systems. Subsequently, developing a set of SDIs will provide an excellent opportunity to systematically consolidate the information scattered among many archives, as well as promoting an integrated EIS. This work presents an experimental model referred to as the 'Sustainable Development Information System of the Island Taiwan' (SDISIT). This system was developed to assist the integrated management of either EIS or ED. The Factor Analysis Method (FAM) is one tool that may prove useful in easing the developing process. Furthermore, by examining the correlations between the indicators, this method can apply existing SDIs to identify the structure of interrelationships among indicators.     

Abatement of sulfur hexafluoride emissions from the semiconductor manufacturing process by atmospheric-pressure plasmas

Sulfur hexafluoride (SF6) is an important gas for plasma etching processes in the semiconductor industry. SF6 intensely absorbs infrared radiation and, consequently, aggravates global warming. This study investigates SF6 abatement by nonthermal plasma technologies under atmospheric pressure. Two kinds of nonthermal plasma processes--dielectric barrier discharge (DBD) and combined plasma catalysis (CPC)--were employed and evaluated. Experimental results indicated that as much as 91% of SF6 was removed with DBDs at 20 kV of applied voltage and 150 Hz of discharge frequency for the gas stream containing 300 ppm SF6, 12% oxygen (O2), and 40% argon (Ar), with nitrogen (N2) as the carrier gas. Four additives, including Ar, O2, ethylene (C2H4), and H2O(g), are effective in enhancing SF6 abatement in the range of conditions studied. DBD achieves a higher SF6 removal efficiency than does CPC at the same operation condition. But CPC achieves a higher electrical energy utilization compared with DBD. However, poisoning of catalysts by sulfur (S)-containing species needs further investigation. SF6 is mainly converted to SOF2, SO2F4, sulfur dioxide (SO2), oxygen difluoride (OF2), and fluoride (F2). They do not cause global warming and can be captured by either wet scrubbing or adsorption. This study indicates that DBD and CPC are feasible control technologies for reducing SF6 emissions.     

Kinetics of benzene adsorption onto activated carbon

An activated carbon bed adsorption process is influenced by the adsorbents' characteristics, volatile organic compound (VOC) characteristics, and process conditions. In the literatures, the adsorption processes of the adsorbents and VOCs were usually considered to be in equilibrium. In this study, the VOC adsorption processes by activated carbon were considered to be a kinetic process, i.e. they are not in equilibrium. Then, isothermal adsorption curves and a small column experiment were simulated.     

Methane and carbon dioxide emissions from Shan-Chu-Ku landfill site in northern Taiwan

To investigate the methane and carbon dioxide emissions from landfill, samples were taken of material up to 5 years old from Shan-Chu-Ku landfill located in the northern part of Taiwan. Atmospheric concentrations of carbon dioxide, methane and nitrous oxide ranged from 310 to 530, 2.64 to 20.16 and 0.358 to 1.516 ppmv with the measurement of gas-type open-path Fourier transform infra-red (FTIR) spectroscopy during February 1998 to March 2000, respectively. Average methane emission rate was 13.17, 65.27 and 0.99 mgm(-2)h(-1) measured by the gas chromatography chamber method in 1-2, 2-3 and 5 year-old landfill, respectively. Similarly, average carbon dioxide emission rate was 93.70, 314.60 and 48.46 mgm(-2)h(-1), respectively. About 2-3 year-old landfill had the highest methane and carbon dioxide emission rates among the tested areas, while 5 year-old landfill was the least. Methane emission rate at night in most tested locations was higher than that in the daytime. Total amount of methane and carbon dioxide emission from this landfill was around 171 and 828 ton in 1999, respectively.     

Characteristics of organic precursors and their relationship with disinfection by-products

The molecular weight distribution and chemical composition of precursors and their relationship with disinfection by-products (DBPs) were investigated. Most of the organic matter responsible for the major DBP precursors in the Pan-Hsin water are small compounds with a molecular weight less than 1 kDa. The hydrophobic acids display the greatest ability to produce DBP. Therefore, effective removal of small molecules or hydrophobic acidic organics prior to disinfection process will significantly reduce the DBP concentration in the finished water. Although the coagulation process is effective in removing large organic precursors and the removal efficiencies of CHCl3 formation potential and organic carbon increase proportionally to the molecular weight of the precursors, the conventional treatment methods have limited efficiency in eliminating small precursors, which have high DBP formation potential.     

Correlation of gas chromatographic properties of chlorobenzenes and polychlorinated biphenyls with the occurrence of reductive dechlorination by untamed microorganisms

To understand the dechlorination ability of chlorobenzenes (CBs) and polychlorinated biphenyls (PCBs) by untamed microorganisms under anaerobic condition and to correlate gas chromatographic properties with the occurrence of reductive dechlorination, introduction of CBs and PCBs in the culture medium inoculated with microorganisms from sludge and sediment, respectively, were performed. Three kinds of culture media preparing from sludge, river water and a synthetic medium were used in the experiments. HCB was degraded to 1,3,5-trichlorobenzene (1,3,5-TCB) and 1,3-dichlorobenzene (1,3-DCB) in both sludge medium and synthetic medium with inoculated microorganisms. Three PCB congeners including 2,3,4-, 3,4,5- and 2,3,4,5-CBp (chlorinated biphenyl) were not found to be dechlorinated in the river water medium with inoculation culture but to be dechlorinated in the synthetic medium. MNDO methodology was used to compute theoretical dechlorination reaction heats and GC-ECD techniques were used to estimate chromatographic data of CB and PCB congeners. Both CB and PCB congeners showed that dechlorination by untamed microorganisms under anaerobic mixed cultures were more likely to occur when larger amounts of energy were released and greater deltaln RRT value between the parent congener and the daughter product was observed. Deltaln RRT provided a more precise information on the singularity of PCBs ortho-dechlorination in an aspect of thermodynamic favorable rule.