化工反应装置危险性分析模式的研究

从近年来化工企业的安全生产事故可以看出,化工生产由于其自身的特点,具有较大的火灾爆炸危险性,因此,正确地对化工企业生产的危险性进行分析,对准确地评价化工企业的安全生产状况非常重要.针对化工企业的安全生产特点,提出了一种针对化工反应装置的危险性分析模式,不仅考虑了生产原料及工艺设备,同时也对工艺过程进行了危险性分析.应用实例表明,该模式对于化工装置的危险性分析具有较强的针对性和可靠性.     

光纤传感器在个体防护装备上的应用进展

1引言 在战场上,个体防护装备对士兵有效地发挥战斗力和避免伤亡起到关键的作用。现代科学技术在军事领域的广泛应用,使得防护装备突破了传统模式,新一代的单兵防护装备不仅要抵御武器的袭击,而且要避免自然环境、化学试剂、火焰和其他战场灾难的危害,须成为高度智能化的作战服。     

动火作业中的安全现状分析

结合新疆八一钢铁集团实际,对动火作业现状进行分析,提出不足;并结合法规、标准要求以及工作实践,从管理、技术、培训等方面提出动火安全的几点对策.     

聚氨酯泡沫材料阴燃发展过程的特性分析

分析对比了相同加热条件下的聚氨酯泡沫材料在有氧和无氧气氛下的升温过程,并对不同加热条件下的聚氨酯泡沫材料的阴燃传播速度进行研究.结果表明:沿着反应进行的方向,分离点的温度越来越低,不同热流条件下的温度分离曲线斜率在实验稳定发展段的变化规律表现得很相似,并在分离点出现后,有氧气氛中的该位置温度在短时间内急剧上升;在阴燃不稳定传播阶段时,热解前锋的速度小于氧化前锋的速度,在稳定传播阶段时,热解前锋速度与氧化前锋速度近乎相等.     

Does safety climate moderate the influence of staffing adequacy and work conditions on nurse injuries?

PROBLEM: Hospital nurses have one of the highest work-related injury rates in the United States. Yet, approaches to improving employee safety have generally focused on attempts to modify individual behavior through enforced compliance with safety rules and mandatory participation in safety training. We examined a theoretical model that investigated the impact on nurse injuries (back injuries and needlesticks) of critical structural variables (staffing adequacy, work engagement, and work conditions) and further tested whether safety climate moderated these effects. METHOD: A longitudinal, non-experimental, organizational study, conducted in 281 medical-surgical units in 143 general acute care hospitals in the United States. RESULTS: Work engagement and work conditions were positively related to safety climate, but not directly to nurse back injuries or needlesticks. Safety climate moderated the relationship between work engagement and needlesticks, while safety climate moderated the effect of work conditions on both needlesticks and back injuries, although in unexpected ways. DISCUSSION AND IMPACT ON INDUSTRY: Our findings suggest that positive work engagement and work conditions contribute to enhanced safety climate and can reduce nurse injuries.     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

Aerobic degradation of bisphenol A by Achromobacter xylosoxidans strain B-16 isolated from compost leachate of municipal solid waste

A novel bacterium designated strain B-16 was isolated from the compost leachate of the municipal solid waste (MSW) in a laboratory reactor. This strain was identified as a gram-negative bacterium, Achromobacter xylosoxidans that could grow on bisphenol A (BPA, a representative endocrine disruptor) as a sole carbon source under aerobic condition. BPA-degrading characteristics of strain B-16 were investigated in liquid cultures. The results show that BPA degradation was influenced by several factors (e.g. inoculum size, substrate concentration, temperature and pH, etc). The half-lives, optimum temperature and pH were found to be 0.58-3.1d, 35 degrees C and 7.0, respectively. BPA-degrading activity and cell growth were inhibited at high substrate concentration. Metabolic intermediates detected during the degradation process were identified as p-hydroxybenzaldehyde, p-hydroxybenzoic acid and p-hydroquinone, respectively. Metabolic pathway of BPA degradation was proposed in this study.     

上海城市交通与机动车排气污染调查

上海市机动车保有量逐年增加，车辆的排气污染愈来愈严重，据调查，１９９７年机动画排放的ＣＯ，ＭＮＨＣ，ＮＯＸ和ＰＭ分别达到５８．６，９．０８，６．２０和０．２３万吨。中心城区机动车排放的ＣＯ，ＮＭＨＣ和ＮＯＸ污染物５０％以上来自于小型车，是影响上海城区环境空气质量的主要污染源。     

The outbreak of COVID-19 in Taiwan in late spring 2021: combinations of specific weather conditions and related factors

Environmental Science and Pollution Research - This study aimed to investigate the impact of weather conditions on the daily incidence of the COVID-19 pandemic in late spring 2021 in Taiwan, which...     

A critical review on adsorption and recovery of fluoride from wastewater by metal-based adsorbents

Environmental Science and Pollution Research - Rapid industrialization is deteriorating water quality, and fluoride pollution in water is one of the most serious environmental pollution problems....