Soil dissipation of juvenile hormone analog insecticide pyriproxyfen and its effect on the bacterial community

This investigation was undertaken to examine the dissipation rate of pyriproxyfen as well as the change in the soil bacterial community. Residues of pyriproxyfen were measured using high performance liquid chromatography (HPLC) and the changes in bacterial community were determined by comparing the 16S rDNA bands on patterns by denaturing gradient gel electrophoresis (DGGE). The dissipation of pyriproxyfen was affected by both the concentration applied and incubation temperature. Lower concentrations (1 mg Kg(-1)) and higher incubation temperatures (30 and 40°C) showed more rapid dissipation rates. The population of microbial community decreased rapidly after incubation with 10 mg Kg(-1) of pyriproxyfen for 91 days, indicating the toxicity of pyriproxyfen toward bacterial communities in a closed soil ecosystem. Lower concentrations of pyriproxyfen showed less toxicity toward the microbial community. From cluster analysis, the structure of the bacterial community showed roughly a 60 % similarity throughout the experiment period in the control experiment, indicating the stability within soil microbiota without chemical agitation. However, the similarity was lower than 50 % both in the one and 10 mg Kg(-1) of insecticide pyriproxyfen spiked experiment, indicating the soil bacterial community changed after the insecticide pyriproxyfen was applied.     

脱硫灰用作钙质材料制备蒸压加气混凝土砖块

为实现半干法脱硫灰的资源化利用,采用半干法脱硫灰作为蒸压加气混凝土砖块中的钙质材料。对脱硫灰进行预处理,使其在含水量20%条件下消化2 h后,烘干。在其他条件不变情况下,掺入经过预处理后的脱硫灰,砖块的抗压强度会有明显的提高。增加经过预处理后的脱硫灰的掺入量,可以在不影响砖块的抗压强度性能的基础之上,降低砖块的干燥收缩值和导热系数,同时提高砖块的抗冻性能和保温隔热性能。     

Aerobic degradation of tetrabromobisphenol-A by microbes in river sediment

This study investigated the aerobic degradation of tetrabromobisphenol-A (TBBPA) and changes in the microbial community in river sediment from southern Taiwan. Aerobic degradation rate constants (k₁) and half-lives (t_1/2) for TBBPA (50 μg g⁻¹) ranged from 0.053 to 0.077 d⁻¹ and 9.0 to 13.1 d, respectively. The degradation of TBBPA (50 μg g⁻¹) was enhanced by adding yeast extract (5 mg L⁻¹), sodium chloride (10 ppt), cellulose (0.96 mg L⁻¹), humic acid (0.5 g L⁻¹), brij 30 (55 μM), brij 35 (91 μM), rhamnolipid (130 mg L⁻¹), or surfactin (43 mg L⁻¹), with rhamnolipid yielding a higher TBBPA degradation than the other additives. For different toxic chemicals in the sediment, the results showed the high-to-low order of degradation rates were bisphenol-A (BPA) (50 μg g⁻¹) > nonylphenol (NP) (50 μg g⁻¹) > 4,4′-dibrominated diphenyl ether (BDE-15) (50 μg g⁻¹) > TBBPA (50 μg g⁻¹) > 2,2′,3,3′,4,4′,5,5′,6,6′-decabromodiphenyl ether (BDE-209) (50 μg g⁻¹). The addition of various treatments changed the microbial community in river sediments. The results also showed that Bacillus pumilus and Rhodococcus ruber were the dominant bacteria in the process of TBBPA degradation in the river sediments.     

Interaction of bisphenol A with dissolved organic matter in extractive and adsorptive removal processes

The fate of endocrine disrupting chemicals (EDCs) in natural and engineered systems is complicated due to their interactions with various water constituents. This study investigated the interaction of bisphenol A (BPA) with dissolved organic matter (DOM) and colloids present in surface water and secondary effluent as well as its adsorptive removal by powdered activated carbons. The solid phase micro-extraction (SPME) method followed by thermal desorption and gas chromatography-mass spectrometry (GC-MS) was utilized for determining the distribution of BPA molecules in water. The BPA removal by SPME decreased with the increased DOM content, where the formation of BPA-DOM complexes in an aqueous matrix was responsible for the reduced extraction of BPA. Colloidal particles in water samples sorbed BPA leading to the marked reduction of liquid phase BPA. BPA-DOM complexes had a negative impact on the adsorptive removal of BPA by powered activated carbons. The complex formation was characterized based on Fourier transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectroscopy, along with the calculation of molecular interactions between BPA and functional groups in DOM. It was found that the hydrogen bonding between DOM and BPA would be preferred over aromatic interactions. A pseudo-equilibrium molecular coordination model for the complexation between a BPA molecule and a hydroxyl group of the DOM was developed, which enabled estimation of the maximum sorption site and complex formation constant as well as prediction of organic complexes at various DOM levels.     

Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

Real-time reverse transcription PCR analysis of trichloroethylene-regulated toluene dioxygenase expression in Pseudomonas putida F1

Toluene dioxygenase (tod) is a multicomponent enzyme system in Pseudomonas putida F1. Tod can mediate the degradation of Trichloroethylene (TCE), a widespread pollutant. In this study, we try to explore the TCE-regulated tod expression by using real-time qRT-PCR. The minimal culture media were supplemented with glucose, toluene, or a mixture of glucose/toluene respectively as carbon and energy sources. The TCE was injected into each medium after a 12-hour incubation period. The TCE injection severely affected bacterial growth when cultured with toluene or toluene/glucose mixtures. The cell density dropped 61 % for bacteria growing in toluene and 36 % for bacteria in the glucose/toluene mixture after TCE injection, but the TCE treatment had little effect on bacteria supplied with glucose alone. The decrease in cell number was caused by the cytotoxicity of the TCE metabolized by tod. The results from the real-time qRT-PCR revealed that TCE was capable of inducing tod expression in a toluene-dependent manner and that the tod expression level increased 50 times in toluene and 3 times in the toluene/glucose mixture after 6 hours of TCE treatment. Furthermore, validation of the rpoD gene as a reference gene for P. putida F1 was performed in this study, providing a valuable foundation for future studies to use real-time qRT-PCR in the analysis of the P. putida F1 strain.     

Levels and patterns of polycyclic aromatic hydrocarbons (PAHs) in soils after forest fires in South Korea

Introduction  

To investigate the influence of biomass burning on the levels of polycyclic aromatic hydrocarbons (PAHs) in soils, temporal trends and profiles of 16 US Environmental Protection Agency priority PAHs were studied in soil and ash samples collected 1, 5, and 9 months after forest fires in South Korea.     

Particulate composition characteristics under different ambient air quality conditions

Particulate compositions including elemental carbon (EC), organic carbon (OC), water-soluble ionic species, and elemental compositions were investigated during the period from 2004 to 2006 in southern Taiwan. The correlation between the pollutant standard index (PSI) of ambient air quality and the various particle compositions was also addressed in this study. PSI revealed a correlation with fine (r = 0.74) and coarse (r = 0.80) particulate matter (PM). PSI manifested a significant correlation with the amount of analyzed ionic species (r approximately 0.80) in coarse and fine particles and a moderate correlation with carbon content (r = 0.63) in fine particles; however, it showed no correlation with elemental content. Although the ambient air quality ranged from good to moderate, the ionic species including chloride (Cl-), nitrate (NO3-), sulfate (SO4(2-)), sodium (Na+), ammonium (NH4+), magnesium (Mg2+), and calcium (Ca2+) increased significantly (1.5-3.7 times for Daliao and 1.8-6.9 times for Tzouying) in coarse PM. For fine particles, NO3-, SO4(2-), NH4+, and potassium (K+) also increased significantly (1.3-2.4 times for Daliao and 2.8-9.6 times for Tzouying) when the air quality went from good to moderate. For meteorological parameters, temperature evidenced a slightly negative correlation with PM concentration and PSI value, which implied a high PM concentration in the low-temperature condition. This reflects the high frequency of PM episodes in winter and spring in southern Taiwan. In addition, the mixing height increase from 980 to 1450 m corresponds to the air quality condition changing from unhealthy to good.     

脱硫后净烟气携带浆液量监测的实验研究

在WFGD系统中,净烟气携带的浆液液滴引起后续设备的腐蚀堵塞,带来的景观污染问题影响周围居民的正常生活.为了精确量化脱硫后净烟气携带浆液量,提出了适用于环境监测专业的测试取样分析方法,并对该方法进行了讨论分析.实验结果表明:该方法的适用范围为净烟气浆液液滴含量在1.1 mg/Nm3以上,通过对取样分析关键环节的讨论分析...