A temporal and spatial monitoring of organotin pollution in a harborside region of Brazil by imposex and ecological quality ratio using <Emphasis Type="Italic">Leucozonia nassa</Emphasis>

This study represents the first use of Leucozonia nassa (Mollusca-Gastropoda) in a program of long-term monitoring. Specimens of L. nassa were collected between 2006 and 2014 and analyzed for the occurrence of imposex in two areas in Southeastern Brazil, one control area and another characterized by the presence of many ports and marinas. Imposex was evaluated in nine sites based on the percentage of females exhibiting imposex (I%), relative penis length index and vas deferens sequence index, classical indices to evaluate tributyltin (TBT) impacts. Moreover, this study uses for the first time in a tropical environment the ecological quality ratio (EQR), an approach to verify the imposex levels as an indicator of the impact by organotin compounds according to the EU Water Framework Directive. The results confirm the occurrence of high levels of imposex in L. nassa with all the indices evaluated. Furthermore, the results also indicate that, despite the international ban, antifouling paints based on TBT are still possibly used in Brazil. In addition, this study shows that L. nassa has the characteristics that make it a suitable bioindicator to monitor TBT pollution, and that the use of the EQR may create important data regarding this problem.     

Pesticides in the surface waters of the Camanducaia River watershed,Brazil

Abstract

Camanducaia River is part of the Piracicaba watershed responsible for pumping water into the Cantareira System, which is one of the main water sources for the metropolis of São Paulo and Campinas, Brazil. Intensive use of pesticides and hilly topography represents a situation of high risk for river water contamination. Therefore, water samples from 12 locations were collected along the Camanducaia River and its tributaries, over a period of 4?mo during the rainy season, and analyzed by GC-MS/MS or UPLC- MS/MS for the presence of 46 pesticides. Seven pesticides (fipronil, methyl parathion, metolachlor, atrazine, carbofuran, diuron, and simazine) were positively detected. Only atrazine (the most frequently detected) and diuron were present at concentrations above the limit of quantification of the analytical method (0.32 and 0.57?μg L^?1 for atrazine and diuron, respectively). Pesticides detection frequency was higher than expected for a river system where only 11.8% of the land area is under agriculture. The vulnerability of the Camanducaia basin to pesticide contamination is attributed to the high annual precipitation (> 1.5?m y^?1 in the headwaters), associated with topographical features (steep terrain) and soil types that favor surface runoff, which has been exacerbated by poor soil management practices.     

A novel mutualism between an ant-plant and its resident pollinator

Pollination systems in which the host plant provides breeding sites for pollinators, invariably within flowers, are usually highly specialized mutualisms. We found that the pollinating bee Braunsapis puangensis breeds within the caulinary domatia of the semi-myrmecophyte Humboldtia brunonis (Fabaceae), an unusual ant-plant that is polymorphic for the presence of domatia and harbours a diverse invertebrate fauna including protective and non-protective ants in its domatia. B. puangensis is the most common flower visitor that carries the highest proportion of H. brunonis pollen. This myrmecophyte is pollen limited and cross-pollinated by bees in the daytime. Hence, the symbiotic pollinator could provide a benefit to trees bearing domatia by alleviating this limitation. We therefore report for the first time an unspecialised mutualism in which a pollinator is housed in a plant structure other than flowers. Here, the cost to the plant is lower than for conventional brood-site pollination mutualisms where the pollinator develops at the expense of plant reproductive structures. Myrmecophytes housing resident pollinators are unusual, as ants are known to be enemies of pollinators, and housing them together may decrease the benefits that these residents could individually provide to the host plant.     

Integrating pattern-based modelling and political ecology in land-use change research: the case of Mexican dry tropics

ABSTRACT

Agricultural and extractive frontiers experiment rapid landscape transformation. Land-Use Sciences and Political Ecology are complementary approaches for analysing how landscape transformations are related to biophysical conditions, and socioeconomic, cultural and political processes developed at global, national and local scales. This study examines such relationships in a long-standing agrarian and resource frontier in southern Mexico for the 1986–2015 period. We combine insights from: (1) a quantitative land use/land cover change pattern-based model, involving a weights of evidence and cellular automata simulations, and (2) a qualitative content analysis of literature and of local actors’ perspectives. Two grand frontier processes have developed in this region: NAFTA-related agrarian transition toward intensification and the establishment of wind farms. Both were triggered by global forces and new forms of land and resources use, but mediated by national-to-local ecological, socioeconomic and political processes, producing particular landscape transformations.     

Monitoring trace metals in urban aerosols from Buenos Aires city. Determination by plasma-based techniques

A study was undertaken, within the framework of a 3 years national project, to assess the content of 13 elements in airborne particulate matter collected in representative zones of the metropolitan area of Buenos Aires. The sampling strategy followed consisted in collecting simultaneously 67 samples of PM10 particulate matter in 9 sampling sites covering an area of about 30 km2 during one week. The collection was performed on ash-free fibre-glass filters using high volume samplers. A combination of aqua regia and perchloric acid was used for leaching metals from filters. Key elements, namely Al, Ca, Cu, Fe, Mn, Mo, Ni, Pb, S, Sb, Sn, Zn and Zr, were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS) at micro g g(-1) and ng g(-1) levels. Analyte concentration varied from 130 ng g(-1)(Mo) to over 30%(Ca). Multivariate statistical analysis was performed on the data set including the measured elemental compositions for the monitored period. The atmospheric concentration found for Pb confirms the decreasing levels of this element since the introduction of unleaded gasoline in 1995: 88 ng m(-3)(2001) < 220 ng m(-3)(1997) < 3900 ng m(-3)(1994). The average S concentration above 3 microg m(-3) is somehow unexpectedly high for Buenos Aires since the relatively low S content of liquid fuels and the massive usage of natural gas imply low emissions of this element from combustion activities. To the best of our knowledge, S concentrations are reported for the first time for this city.     

Effects of ozone fumigation treatment on the removal of residual difenoconazole from strawberries and on their quality

The effect of ozone fumigation on the reduction of difenoconazole residue on strawberries was studied. Strawberries were immersed in 1.0 L of aqueous solution containing 400 μL of the commercial product (250 g L^?1 of difenoconazole) for 1 min. Then, they were dried and exposed to ozone gas (O₃) at concentrations of 0.3, 0.6 and 0.8 mg L^?1 for 1 h. The ozone fumigation treatments reduced the difenoconazole residue on strawberries to concentrations below 0.5 mg kg^?1, which corresponds to a 95% reduction. The strawberries treated with ozone and the control group, which was not treated with ozone, were stored at 4°C for 10 days. Some characteristics of the fruit were monitored throughout this period. Among these, pH, weight loss and total color difference did not change significantly (P > 0.05). The fumigation with ozone significantly affected the soluble solids, titratable acidity and ascorbic acid content (vitamin C) of the strawberries preventing a sharp reduction of these parameters during storage.     

An adaptive plan for prioritizing road sections for fencing to reduce animal mortality

Mortality of animals on roads is a critical threat to many wildlife populations and is poised to increase strongly because of ongoing and planned road construction. If these new roads cannot be avoided, effective mitigation measures will be necessary to stop biodiversity decline. Fencing along roads effectively reduces roadkill and is often used in combination with wildlife passages. Because fencing the entire road is not always possible due to financial constraints, high-frequency roadkill areas are often identified to inform the placement of fencing. We devised an adaptive fence-implementation plan to prioritize road sections for fencing. In this framework, areas along roads of high, moderate, and low levels of animal mortality (respectively, roadkill hotspots, warmspots, and coldspots) are identified at multiple scales (i.e., in circles of different diameters [200–2000 m] in which mortality frequency is measured). Fence deployment is based on the relationship between the amount of fencing being added to the road, starting with the strongest roadkill hotspots, and potential reduction in road mortality (displayed in mortality-reduction graphs). We applied our approach to empirical and simulated spatial patterns of wildlife–vehicle collisions. The scale used for analysis affected the number and spatial extent of roadkill hot-, warm-, and coldspots. At fine scales (e.g., 200 m), more hotspots were identified than at coarse scales (e.g., 2000 m), but combined the fine-scale hotspots covered less road and less fencing was needed to reduce road mortality. However, many short fences may be less effective in practice due to a fence-end effect (i.e., animals moving around the fence more easily), resulting in a trade-off between few long and many short fences, which we call the FLOMS (few-long-or-many-short) fences trade-off. Thresholds in the mortality-reduction graphs occurred for some roadkill patterns, but not for others. Thresholds may be useful to consider when determining road-mitigation targets. The existence of thresholds at multiple scales and the FLOMS trade-off have important implications for biodiversity conservation.     

Management of agricultural biomass wastes: Preliminary study on characterization and valorisation in clay matrix bricks

In this work the feasibility of using woody agricultural biomass wastes as grapes and cherries seeds, sawdust, as pore forming agent, and sugar cane ash, as silica precursor, in bricks, were reported.Sawdust and grapes and cherries seeds, thanks to their organic substances content, during their combustion, bring an energetic support in the bricks firing phase and act as pore forming agent. Usually the addition of this kind of waste is limited to 10 wt.% in order to reach an equilibrium between positive (weight and shrinkage decrease and porosity increase) and negative (increase of water absorption and mechanical resistance decrease) effects. The results show that grapes and cherries seeds, added in a percentage of 5 wt.% to a brick formulation, have better influence with respect to the sawdust, maintaining the mechanical properties of the fired brick (950 °C), showing modulus of rupture around 21–23 MPa with a weight reduction of 3–10% (respect to the standard one). Regarding the sugar cane ash, the addition of 5 wt.% improves the mechanical properties (modulus of rupture around 27 MPa) and no weight decrease is observed. These results confirmed the role played by this kind of agricultural waste, which thanks to its high silica content (61 wt.%) is capable to demonstrate a filler and plasticity reducing effect on the brick bodies. Tests carried out highlighted that the addition of these by-products (5 wt.%) do not change negatively the main technological properties measured (water absorption, linear shrinkage, flexural resistance, etc.) and permit to hypothesize their use to obtain bricks with both insulating and higher mechanical properties using a pore agent forming or silica carrier alternative raw materials, respectively.