Nitro-PAH in ambient particulate matter in the atmosphere of Athens

Nitrated polynuclear aromatic hydrocarbons (NPAH) with a molecular mass of 247 Daltons were found in soot collected in downtown Athens during a campaign performed in 1996. In particular, 2-nitrofluoranthene (2-NFa) and 2-nitropyrene (2-NPy), which are mainly related to photo-induced chemical processes occurring in the atmosphere, were more abundant than 1-nitropyrene (1-NPy) usually associated to motor vehicle exhaust.     

Macro-fungal (Agaricus bisporus) wastes as an adsorbent in the removal of the acid red 97 and crystal violet dyes from ideal colored effluents

The wastes from the macro-fungus Agaricus bisporus were used as an eco-friendly and low-cost adsorbent for the treatment of colored effluents containing the recalcitrant dyes, acid red 97 (AR97) and crystal violet (CV). The macro-fungal waste presented an amorphous structure, composed of particles with different sizes and shapes. Also, it presents typical functional chemical groups of proteins and carbohydrates with a point of zero charge of 4.6. The optimum conditions for the dosage were found to be as follows: 0.5 g L⁻¹ with an initial pH at 2.0 for the AR97 and 8.0 for the CV. From the kinetic test, it was found that it took 210 min and an adsorption capacity of 165 mg g⁻¹ for the AR97. Concerning the CV kinetics, it took 120 min to reach the equilibrium and it achieved an adsorption capacity of 165.9 mg g⁻¹. The Elovich model was the most proper model for describing the experimental data, achieving an R² ≥ 0.997 and MSE ≤ 36.98 (mg g⁻¹)². The isotherm curves were best represented by the Langmuir model, predicting maximum adsorption capacity of 372.69 and 228.74 mg g⁻¹ for the AR97 and CV, respectively. The process was spontaneous and favorable for both dyes. The ∆H⁰ values were 9.53 and 10.69 kJ mol⁻¹ for AR97 and CV, respectively, indicating physical and endothermic adsorption. Overall, the wastes from Agaricus bisporus have the potential to adsorb cationic and anionic dyes, thus solving environmental problems related to water quality and residue disposal.

     

Photodegradation of Diquat and Paraquat in aqueous solutions by titanium dioxide: evolution of degradation reactions and characterisation of intermediates

The titanium dioxide assisted photodegradation of Diquat and Paraquat herbicides solutions has been the subject of the present investigation, considering its direct application in the treatment of contaminated waters and soils. To have a better understanding of the photodegradation process, different types of TiO2, commercial and 'home prepared' Ti(1-x)FexO2 (x = 0% and 4%), were used as catalysts, using an UV light as radiation source. The degradation reactions were followed by UV spectroscopy and the intermediates and reaction products were characterised by electrospray ionisation mass spectrometry (ESIMS) combined with collision-induced dissociation (CID) and tandem mass spectrometry (MS/MS). The present study shows that, for photocatalytic degradation of Diquat and Paraquat solutions, a basic pH can be determinant, as well as the type of catalyst. The type of catalyst can also strongly influence the degradation pattern of the herbicide. Regarding complete degradation, we were able to show that Diquat is more persistent than Paraquat. During the photocatalytic processes, several intermediate and reaction products are sequentially formed, to which structures are proposed.