Heavy metal sequential extraction methods--a modification for tropical soils

Sequential extractions of metals can be useful to study metal distributions in various soil fractions. Although several sequential extraction procedures have been suggested in the literature, most were developed for temperate soils and may not be suitable for tropical soils with high contents of Mn and Fe oxides. The objective of this study was to develop a sequential fractionation procedure for Cu and Zn in tropical soils. Extractions were performed on surface (0–20 cm) samples of ten representative soils of Sao Paulo State, Brazil. Chemically reactive Mn forms were satisfactorily assessed by the new modified procedure. Amorphous and crystalline Fe oxides were more selectively extracted in a new two-step extraction. Soil-born Zn and Cu were primarily associated with recalcitrant soil fractions. The proposed procedure provided more detailed information on metal distribution in tropical soils and better characterization of the various components of the soil matrix. The new procedure is expected to be an important tool for predicting the potential effects of environmental changes and land application of metals on the redistribution of chemical forms of metals in tropical soils.     

Nation‐building policies in Timor‐Leste: disaster risk reduction,including climate change adaptation

Few studies have explored the relationships between nation‐building, disaster risk reduction and climate change adaptation. Focusing on small island developing states, this paper examines nation‐building in Timor‐Leste, a small island developing state that recently achieved independence. Nation‐building in Timor‐Leste is explored in the context of disaster risk reduction, which necessarily includes climate change adaptation. The study presents a synopsis of Timor‐Leste's history and its nation‐building efforts as well as an overview of the state of knowledge of disaster risk reduction including climate change adaptation. It also offers an analysis of significant gaps and challenges in terms of vertical and horizontal governance, large donor presence, data availability and the integration of disaster risk reduction and climate change adaptation for nation‐building in Timor‐Leste. Relevant and applicable lessons are provided from other small island developing states to assist Timor‐Leste in identifying its own trajectory out of underdevelopment while it builds on existing strengths.     

Beneficial use of dredged sand for beach nourishment and coastal landform enhancement—the case study of Tróia, Portugal

In the winter of 2006/2007 approximately 200,000 m³ of high quality sand from the dredging of the local marina were placed at the ocean-side beaches in the vicinity of a tourism development in Tróia, Portugal. The beach-quality sediment provided a source of “sand of opportunity” which was used to increase the dry-beach width of the highly used coastal stretch. The sediment was placed along approximately 600 m of shoreline and a monitoring program has since being carried out twice a year. High-resolution topographic surveys and sediment analysis are being conducted to evaluate the performance and response of the fill to the local forcing factors and ultimately to evaluate the effectiveness of the fill project. Two years after the nourishment, the sediment has been distributed both cross-shore and alongshore. The pre-nourishment beach slope was attained and the new shoreline has acquired a natural shape. Berm width increased by a maximum of 100 m, and a set of new dune ridges has developed, due to sand accumulation promoted by the settlement of vegetation. In conclusion, 2 years after its completion, the beach nourishment in Tróia can be viewed as a successful project in which the beneficial use of dredged material resulted in: 1) area for increased dune field growth and development, 2) enhancement of potential shorebird nesting areas and habitat, and 3) increased area for recreation purposes.     

Kinetics of thermal de-chlorination of PVC under pyrolytic conditions

Although PVC-containing wastes are an important potential source of energy they are frequently disposed in landfill. In thermal treatment processes such as pyrolysis and gasification, the presence of poly(vinyl chloride) (PVC), a compound with 56.7% of chlorine, may cause problems concerned with environmental protection, as consequence of the formation of hydrochloric acid, chlorine gas and dioxins, as well as corrosion phenomena of the reactor/equipment materials. Thus, a possible solution may involve a previous removal of the chlorine from PVC containing waste through a pyrolysis process at low temperatures before the material being submitted to a subsequent thermal treatment, for energetic valorization. In this work, a kinetic model for the thermal decomposition of PVC has been developed, in view of its de-chlorination. DTA/TGA testing at different temperatures indicated a first order reaction and an activation energy of 133,800J/mol. An almost completed de-chlorination reaction was obtained at 340°C under an inert atmosphere. The resulted material is a C(n)H(n) type polymer with potential to be used in an energy recovery process. Validation test performed at laboratory scale indicate that the temperature of 340°C enables the removal of ～99.9% of the chlorine present in PVC. The chloride can be fixed in the form of an aqueous solution of HCl or calcium chloride, driving to an alternative full process with environmental benefits and reduction of the costs associated to the PCV - containing materials/wastes management.     

A ‘coastal-hazard GIS’ for Sri Lanka

Following the 2004 tsunami disaster in Sri Lanka, it was apparent that mapping the coast’s vulnerability was essential for future protection of the local populations. We therefore developed a prototype ‘Coastal-hazard GIS’ for Sri Lanka so as to provide an effective tool for decision makers to limit the impact of natural coastal hazards such as sea level rise, tsunamis, storm surges and coastal erosion, and thus protect the exposed assets (population, property, settlements, communications networks, etc.). The prototype was developed on a pilot site in Galle through building up homogeneous data on the land/sea interface from studies conducted on the exposure of the coastal populations, the aim being to enable an evaluation of the hazards combined with the vulnerability and thus an analysis of the risks. Coastal risk scenarios are developed so as to estimate the impacts and consequences of an event (tsunami, storm, etc.) on the assets, the principle behind this being that if, in general, the coastal hazard cannot be decreased, then a better knowledge of it through simulation should make it possible to limit the vulnerability and thus the risk. The Coastal-hazard GIS will also provide a planning tool in terms of locating new settlements, expanding urban areas, siting coastal protection works, etc.     

Setting up an early warning system for epidemic-prone diseases in Darfur: a participative approach

In April-May 2004, the World Health Organization (WHO) implemented, with local authorities, United Nations (UN) agencies and non-governmental organisations (NGOs), an early warning system (EWS) in Darfur, West Sudan, for internally displaced persons (IDPs). The number of consultations and deaths per week for 12 health events is recorded for two age groups (less than five years and five years and above). Thresholds are used to detect potential outbreaks. Ten weeks after the introduction of the system, NGOs were covering 54 camps, and 924,281 people (IDPs and the host population). Of these 54 camps, 41 (76%) were reporting regularly under the EWS. Between 22 May and 30 July, 179,795 consultations were reported: 18.7% for acute respiratory infections; 15% for malaria; 8.4% for bloody diarrhoea; and 1% for severe acute malnutrition. The EWS is useful for detecting outbreaks and monitoring the number of consultations required to trigger actions, but not for estimating mortality.     

Effect of food level on the acute and chronic responses of daphnids to lindane

The toxic effects of lindane on the zooplankton communities may be strongly related to the population fitness, which is highly dependent on food availability. In order to test this hypothesis, acute (immobilisation) and chronic (life-history) responses of Daphnia longispina and Daphnia magna, reared at different food levels (low, normal, and high), were assessed in laboratorial exposures to several concentrations of lindane. A bifactorial design was employed (food level versus lindane concentration) for both species. Results showed that lindane was toxic to both D. magna and D. longispina, within a similar range. However, lindane toxicity to daphnids was dependent on food level, suggesting that the latter is an important factor to take into account when assessing the toxic effects of lindane on zooplankton communities.     

Characterization and possible uses of ashes from wastewater treatment plants

This work, on the ashes from the wastewater treatment plant of Galindo (Vizcaya, Spain), has been outlined with the purpose of finding their physico-chemical properties and suggesting possible applications. Ashes contain important quantities of iron, calcium, silica, alumina and phosphates. X-Ray diffraction data make it possible to estimate the mineralogical compositions of the original ashes and also, after thermal treatment at 1200 and 1300 degrees C, the main reactions occurring in thermal treatment. Particle size analysis makes it possible to classify ashes as a very fine powdered material. The thermal treatment leads to a densification of the material and provokes losses of weight mainly due to the elimination of water, carbon dioxide and sulphur trioxide. Application tests show that ashes are not suitable for landfill and similar applications, because of their plastic properties. Testing for pozzolanic character, after the ashes had been heated at 1200 degrees C, did not lead to a strong material probably due to low contents in silica and alumina or to requiring a higher heating temperature. Thermal treatment leads to densification of the material with a considerable increase of compressive strength of the probes. The use of additives (clays and powdered glass) to improve ceramic properties of ashes will be the aim of a future work.     

Speciation and quantification of mercury in Oxisol, Ultisol, and Spodosol from Amazon (Manaus, Brazil)

In order to investigate the content and distribution of Hg in soils from Amazon areas not impacted by gold mining activities, the concentration and granulometric distribution of Hg were determined in three different types of soils. Hg speciation data were obtained by a thermodesorption atomic spectrometry system and the role of physico-chemical and mineralogical characteristics on Hg content were also studied. Hg concentrations found in the soil fraction <2000 microm were similar to values found in other Amazon areas without anthropogenic sources. The fine fraction (<53 microm) of podzolized soils had a higher Hg content than clayey soils. Multivariate analysis shows that there are marking differences between Spodosols of two distinct areas (fine fraction Hg contents up to 10-fold as high) indicating the importance of pedogenic processes. All statistical data analysis indicated that organic matter plays an important role in Hg accumulation in the types of soils studied. Thermodesorption analysis revealed the presence of only Hg2+, and the predominance of organically bound Hg in the majority of the studied samples.     

CONTEMPORANEOUS AUTOREGRESSIVE-MOVING AVERAGE (CARMA) MODELING IN WATER RESOURCES1

ABSTRACT: The Contemporaneous Autoregressive-Moving Average (CARMA) model is a simple and efficient model that can be used to fit many multivariate hydrological time series. For certain types of multistation river flow systems, the CARMA model is naturally obtained when the physical restrictions of the system or the characteristics of the data are taken in consideration during the formulation of the model. It is shown how the CARMA model can optimally be used to handle multiple time series where the number of observations in each series may be different. Adequate model building techniques, as well as computational and statistical efficient algorithms to estimate the parameters of the model, are given. The methodologies and applications of the CARMA model are illustrated with three examples. It is also shown how the full multivariate ARMA model may lead to losses in efficient of the estimators when the CARMA model is adequate.