Vitrification of bottom ash from a municipal solid waste incinerator

During incineration of municipal solid waste (MSW), various environmentally harmful elements and heavy metals are liberated either into bottom ash, or carried away with the off-gases and subsequently trapped in fly-ash. If these minor but harmful elements are not properly isolated and immobilized, it can lead to secondary environmental pollution to the air, soil and water. The stricter environmental regulations to be implemented in the near future in The Netherlands require a higher immobilization efficiency of the bottom ash treatment. In the present study, MSW incinerator bottom ash was vitrified at higher temperatures and the slag formed and metal recovered were examined. The behaviour of soluble elements that remain in the slag is evaluated by standard leaching test. The results obtained can provide a valuable route to treat the ashes from incinerators, and to make recycling and more efficient utilization of the bottom ash possible.     

Performance of industrial by-products in controlled low-strength materials (CLSM)

As the construction industry continues to recognise the importance of sustainable development, technologies such as controlled low-strength material (CLSM) have come to the forefront as viable means of safely and efficiently using by-product and waste materials in infrastructure applications. CLSM, also known as flowable fill, can be defined as an engineered backfill material containing fine aggregates, Portland cement, water and a by-product material. CLSM can provide an economically and technically feasible alternative to conventional fill materials because of potential cost savings related to its unique and often superior technical properties. In this present experimental study, three industrial by-products, namely fly ash (FA), rice husk ash (RHA) and quarry dust (QD), were used as constituent materials in CLSM. Mixture proportions were developed for CLSM containing these industrial by-products and were tested in the laboratory for various properties, such as flowability, unconfined compressive strength (UCS), stress-strain behaviour, density, water absorption and volume changes. Comparison between the two pozzolanic materials, namely FA and RHA, for their potential to produce an effective CLSM has been made. It can be observed from the results that by-product materials such as FA, RHA and QD can be successfully used in CLSM. This successful utilization of by-product materials is important to sustainable development and is the focus of this research.     

An inexact multi-objective dynamic model and its application in China for the management of municipal solid waste

With the development of science and technology, solid waste management has become a serious environmental problem for most communities all over the world. This paper presents a multi-objective optimization model for the management of municipal solid waste (MSW) via an uncertainty approach. In this model, the system cost of solid waste management and the environmental impact are considered as the main objectives, and some necessary constraints based on the characteristics of China are included; additionally, Pollution loss theory is applied to evaluate the environmental impact.This model is applied to the City of Fo Shan, China. Compared with the primary project of Fo Shan, which is provided by the government, the results of the optimization procedure show that the overall system cost could be reduced by $1–2.4/ton, i.e., $3.7 million/yr. The model presented in this paper was proven to be an effective response to the multi-objective solid waste management problem, and provides a new technique to optimize MSW management and operation. Why is the optimization result better? By analyzing the modelling with respect to function, constraints, and results, we conclude that the profit would be augmented due to the amount of the waste that would be treated by recycling technology, which would increase rapidly during the planning time; thus, the total system cost could be reduced accordingly.     

Zinc and cobalt phytoextraction by different plant species

Plant species sorghum (Sorghum vulgar L.), clover (Trifolium pratense L.), panikum (Panicum antidotal), and canola (Brassica napus) were tested to determine their phytoremediation potential. After a period of about 90 days, plant samples (shoots and roots) and soil samples (before and after cultivation) were collected for zinc and cobalt analyses using atomic absorption spectrometry. The highest zinc uptake was observed in canola, while panikum grass showed a high zinc accumulation affinity compared to sorghum and clover. Calculation of the recovery percentage, based on the amount of zinc removed from the soil after cultivation, ranged between 12.8 and 36.3 percent of the total initial zinc. Canola shoots exhibited the highest cobalt uptake compared to the other plant species. Calculation of the recovery percentage based on cobalt removed from the soil after cultivation ranged between 10.1 and 40.7 percent of the total initial cobalt concentration. © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Seasonality of selected surface water constituents in the Indian River Lagoon, Florida

Seasonality is often the major exogenous effect that must be compensated for or removed to discern trends in water quality. Our objective was to provide a methodological example of trend analysis using water quality data with seasonality. Selected water quality constituents from 1979 to 2004 at three monitoring stations in southern Florida were evaluated for seasonality. The seasonal patterns of flow-weighted and log-transformed concentrations were identified by applying side-by-side boxplots and the Wilcoxon signed-rank test (p < 0.05). Seasonal and annual trends were determined by trend analysis (Seasonal Kendall or Tobit procedure) using the U.S. Geological Survey (USGS) Estimate TREND (ESTREND) program. Major water quality indicators (specific conductivity, turbidity, color, and chloride), except for turbidity at Station C24S49, exhibited significant seasonal patterns. Almost all nutrient species (NO(2)-N, NH(4)-N, total Kjeldahl N, PO(4)-P, and total P) had an identical seasonal pattern of concentrations significantly greater in the wet than in the dry season. Some water quality constituents were observed to exhibit significant annual or seasonal trends. In some cases, the overall annual trend was insignificant while opposing trends were present in different seasons. By evaluating seasonal trends separately from all data, constituents can be assessed providing a more accurate interpretation of water quality trends.     

Single-element and competitive metal mobility measured with column infiltration and batch tests

The distribution coefficient, Kd, is often used to quantify heavy metal mobility in soils. Batch sorption or column infiltration tests may be used to measure Kd. The latter are closer to natural soil conditions, but are difficult to conduct in clays. This difficulty can be overcome by using a laboratory centrifuge. An acceleration of 2600 gravities was applied to columns of London Clay, an Eocene clay sub-stratum, and Cu, Ni, and Zn mobility was measured in centrifuge infiltration tests, both as single elements and in dual competition. Single-element Kd values were also obtained from batch sorption tests, and the results from the two techniques were compared. It was found that Kd values obtained by batch tests vary considerably depending on the metal concentration, while infiltration tests provided a single Kd value for each metal. This was typically in the lower end of the range of the batch test Kd values. For both tests, the order of mobility was Ni>Zn>Cu. Metals became more mobile in competition than when in single-element systems: Ni Kd decreased 3.3 times and Zn Kd 3.4 times when they competed with Cu, while Cu decreased only 1.2 times when in competition with either Ni or Zn. Our study showed that competitive sorption between metals increases the mobility of those metals less strongly bound more than it increases the mobility of more strongly bound metals.     

Determination of optimum operating conditions for industrial dye wastewater treatment using adaptive heuristic criticism pH control

For a pilot-scale application, pH control in the treatment of highly contaminated dye industrial wastewater containing metallic compounds as the main pollutants has been investigated with a method using adaptive heuristic criticism control (AHCC). Subsequent experimentation on between 12 and 18 l of the wastewater was carried out using statistical experimental design methodology to evaluate the effects of three critical factors: slaked lime (calcium hydroxide, Ca(OH)(2)) concentration, iron chloride (FeCl(3)) concentration and wastewater volume. With these critical factors, the wastewater treatment process is modeled as an appropriate quadratic cost function of the turbidity of the clarified water. The model is optimized with Rosenbrock's method. Response surface topology of the wastewater treatment is given in terms of optimal concentrations of lime water and FeCl(3) and optimal wastewater volume at pH 11.     

Social and economic impacts of carbon sequestration and land use change on peasant households in rural China: a case study of Liping, Guizhou Province

Numerous innovative approaches to mitigate effects of excessive emission of greenhouse gases (GHGs) on global climate change are being proposed and formulated. Sequestering carbon to terrestrial ecosystems represents one of the important clean development mechanisms. Reforestation through converting various non-forest lands to forests is undoubtedly an important dimension of carbon sequestration. Using Liping County in Guizhou Province as a case region, this study examines the perceived change in social and economic livelihoods of peasants and the factors responsible for the variations in the changes. The results of the study reveal that socio-economic changes associated with the government-financed project are multifaceted and profound. Because of the financial subsidies provided by the central government, this environmental action in many aspects can be regarded as a poverty reduction measure in the underdeveloped area where rural poverty is widespread. A majority of peasant households have benefited from project participation. The land conversion project with continued financial support also contributes to the social transformations of traditional rural society in remote areas to a more mobile, less subsistence agriculture-based, and open society.     

Tests of soil organic carbon density modeled by InTEC in China's forest ecosystems

The integrated terrestrial ecosystem C-budget model (InTEC) developed by Chen and co-workers has been used successfully to predict carbon dynamics of forests in Canada. It was tested here for forest soil organic carbon (SOC) density of China's northern temperate zone and southern subtropical zone. The results show that the simulated SOC density is highly correlated and in broad agreement with observations in Liping and in Changbaishan, representing the southern subtropical zone and the northern temperate zone in China, respectively. SOC density ranged from 2.2 to 11.2 kg/m(2) in Liping and from 3.4 to 14.8 kg/m(2) in Changbaishan. The correlation coefficients (r(2)) are 0.63 (N=16) and 0.76 (N=14) between the simulated and measured data in Liping and Changbaishan, respectively. The SOC densities under different vegetation types in Liping decrease in the order of mixed forest, broadleaf forest, Chinese fir, couch grass, and Chinese redpine, and in Changbaishan in the order of mixed forest, silver fir, larch forest, and birch forest.