Schwermetalle in Regenwürmern Baden-Württembergs Teil 2: ?kotoxikologische Bewertung des Bodens

Methoden  

Zur Bewertung der gemessenen Schwermetallbelastungen des Bodens wurden sog. Risiko-Kennlinien für die Metalle Blei, Cadmium, Kupfer, Nickel und Zink entwickelt, die eine einheitliche Charakterisierung von Bodengehalten im Hinblick auf ihre Wirkung auf den Regenwurm sowie auf naturr?umliche Gegebenheiten erm?glichen. Die Mobilit?t der Metalle, die für die biologische Wirkung entscheidender ist als der Gesamtgehalt im Boden, wurde bei der Bewertung berücksichtigt.     

Membrane,action, and oscillatory potentials in simulated protocells

Electrical membrane potentials, oscillations, and action potentials are observed in proteinoid microspheres impaled with (3 M KCl) microelectrodes. Although effects are of greater magnitude when the vesicles contain glycerol and natural or synthetic lecithin, the results in the purely synthetic thermal protein structures are substantial, attaining 20 mV amplitude in some cases. The results add the property of electrical potential to the other known properties of proteinoid microspheres, in their role as models for protocells.     

Evaluation of the efficiency of some sediment trapping methods after a Mediterranean forest fire

Forest fires are common in Mediterranean environments and may become increasingly more frequent as the climate changes. Destruction of the forest cover and litter layer leads to greater overland flow and increased erosion rates. The greatest risk occurs during the first rainstorms following a major fire, so local authorities must act quickly to put erosion control methods in place in order to avoid excessive post-fire sediment loads in river channels. Deciding on which methods to use requires accurate knowledge of their impact on sediment load and an estimate of their cost efficiency. The objective of this study was to evaluate the efficiency of Log Debris Dams (LDDs) and a sedimentation basin for their effectiveness in trapping sediments. Paired sub-catchments were studied to quantify the amount of sediments trapped in stream channels by a series of LDDs and a sedimentation basin. Cost efficiency was evaluated for each of the measures as a function of the cost per unit volume of sediments trapped. In addition, grain size analyses were performed to characterise the nature of the sediments trapped. A third sediment trapping method, Log Erosion Barriers (LEBs) was evaluated more superficially than the first two and conclusions regarding this method are tentative. LDDs trapped a mean volume of 1.57 m³ per unit (median = 1.28 m³); mean LDD height was 105.4 cm (std. dev. = 21.9 cm), and mean height of trapped sediments was only 50.0 cm (std. dev. = 22.9 cm), showing that the traps were only half filled. Sediment height was limited by the presence of gaps between logs or branches that allowed runoff to flow through. Comparison of the textural characteristics of slope and trapped sediments showed distinct sorting: particles greater than 20 mm were not mobilised from the slopes during the study period, sediments in the medium to coarse sand size fractions were trapped preferentially by the LDDs, and sediments in the sedimentation basin were enriched by clay and silt sized (<0.050 mm) particles as coarser sediments were trapped upstream by the LDDs. Cost efficiency of LDDs was estimated at about 143 € m⁻³ for the LDDs and 217 € m⁻³ for the sedimentation basin at the time of sampling. The LDDs are therefore a cost effective method of trapping sediments, but they can only be used when pine trees or straight-trunked trees are locally available. In this case, they should be combined with LEBs, which had a cost efficiency estimated at about 250 € m⁻³. Installation of the LEBs had not been optimised and they have the advantage of trapping sediments on the slopes where they can continue to play an ecological role, so this method can give better results with more care. Sedimentation basins can be emptied if necessary and are useful in areas where pine trees are not available and where the site can be secured.     

How stable are personalities? A multivariate view of behavioural variation over long and short timescales in the sheepshead swordtail,Xiphophorus birchmanni

Many studies have revealed repeatable (among-individual) variance in behavioural traits consistent with variation in animal personality; however, these studies are often conducted using data collected over single sampling periods, most commonly with short time intervals between observations. Consequently, it is not clear whether population-level patterns of behavioural variation are stable across longer timescales and/or multiple sampling periods or whether individuals maintain consistent ranking of behaviours (and/or personality) over their lifetimes. Here, we address these questions in a captive-bred population of a tropical freshwater poeciliid fish, Xiphophorus birchmanni. Using a multivariate approach, we estimate the among-individual variance-covariance matrix (I), for a set of behavioural traits repeatedly assayed in two different experimental contexts (open-field trials, emergence and exploration trials) over long-term (56 days between observations) and short-term (4-day observation interval) time periods. In both long- and short-term data sets, we find that traits are repeatable and the correlation structure of I is consistent with a latent axis of variation in boldness. While there are some qualitative differences in the way individual traits contribute to boldness and a tendency towards higher repeatabilities in the short-term study, overall, we find that population-level patterns of among-individual behavioural (co)variance to be broadly similar over both time frames. At the individual level, we find evidence that short-term studies can be informative for an individual’s behavioural phenotype over longer (e.g. lifetime) periods. However, statistical support is somewhat mixed and, at least for some observed behaviours, relative rankings of individual performance change significantly between data sets.     

Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of a third phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The aim of the project is to increase the understanding of the behaviour of sub-cooled non-flashing and superheated flashing liquid jets, and to improve the prediction of initial droplet size, droplet dispersion and rainout.Phase III of the JIP first included scaled experiments for materials with a range of volatilities (water, cyclohexane, butane, propane and gasoline). These experiments were carried out by Cardiff University including measurements of flow rate and initial droplet size across the full relevant range of superheats. See the companion paper II for further details of these experiments and the derivation of new refined correlations for droplet size distribution and Sauter Mean Diameter. Furthermore large-scale butane experiments were carried out by INERIS (France) to ensure that for more realistic scenarios the derived droplet size correlations are accurate.Model validation and model improvements were carried out by DNV Software, including validation of release rate and initial droplet size against the above scaled and large-scale experiments. New correlations for droplet size distribution and Sauter Mean Diameter (SMD) were implemented into the Phast discharge model. These were compared against a range of other droplet size and rainout correlations published in the literature, in conjunction with validation against an extensive set of experiments. It was shown that the new droplet size correlation agrees better against experimental data than the existing Phast correlation. To further improve the rainout prediction, the Phast dispersion model (UDM) was also extended to allow simultaneous modelling of a range of droplet sizes and distributed rainout (rather than rainout at one point).     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.     

Sediment Source Assessment in a Lowland Watershed Using Nitrogen Stable Isotopes1

Fox, James F., Charles M. Davis, and Darren K. Martin, 2010. Sediment Source Assessment in a Lowland Watershed Using Nitrogen Stable Isotopes. Journal of the American Water Resources Association (JAWRA) 46(6):1192–1204. DOI: 10.1111/j.1752-1688.2010.00485.x Abstract: Sediment sources and transported sediments were sampled in a lowland watershed with pronounced fine sediment storage in the streambed. Sediments were analyzed for carbon and nitrogen content and stable nitrogen isotopic composition. Analysis of the data shows that temporarily stored streambed sediments dominate the sediment load during moderate- and low-flow hydrologic events. Modeling of sediment transport and nitrogen elemental and isotopic mass balance was performed for the watershed for a 12-month time period using a continuous, conceptual-based model. The model results show that during moderate- and low-flow hydrologic events, the streambed is slowly downcutting. During very high-flow hydrologic events, deposition is pronounced in the streambed and sediment is replenished to the bed. Nitrogen model results show that elemental and isotopic nitrogen of streambed sediments vary substantially over the simulation period. In this manner, the streambed in a lowland watershed functions as a temporary storage zone that, in turn, can impact the nitrogen elemental and isotopic signature of sediments. The variation could significantly impact estimates of sediment provenance using nitrogen tracer-based methods. Future work should consider both hydrologic and biogeochemical control on the nitrogen isotopic signature of sediments in small lowland watersheds and streams where a significant portion of deposited fines are temporarily stored.     

Response of Elk to Habitat Modification Near Natural Gas Development

Elk (Cervus elaphus) are known to shift habitat use in response to environmental modifications, including those associated with various forms of energy development. The specific behavioral responses underlying these trends, however, have not been effectively studied. To investigate such effects, we examined elk response to habitat alteration near natural gas wells in Las Animas County, Colorado, USA in 2008–2010. We created 10 1-ha openings in forests adjacent to 10 operating natural gas wells by removing standing timber in 2008, with concomitant establishment of 10 1-ha control sites adjacent to the same wells. On each site, we estimated elk use, indexed by pellet density, before and after timber removal. Concurrently, we measured plant production and cover, nutritional quality, species composition and biomass removed by elk and other large herbivores. Species richness and diversity, graminoid and forb cover, and graminoid and forb biomass increased on cut sites following tree removal. Differences were greater in 2010 than in 2009, and elk and deer removed more plant biomass in 2010 than 2009. Elk use of cut sites was 37?% lower than control sites in 2009, but 46?% higher in 2010. The initially lower use of cut sites may be attributable to lack of winter forage on these sites caused by timber removal and associated surface modification. The increased use of cut sites in 2010 suggested that elk possessed the behavioral capacity, over time, to exploit enhanced forage resources in the proximity of habitat modifications and human activity associated with maintenance of operating natural gas wells.     

Ozone and Radionuclide Correlations In Air of Marine Trajectory At Quillayute,Washington

A large number of radioactive and non-radioactive airborne constituents are being measured continually at our coastal air reference station located in northwestern Washington State. Important correlations have been observed between many of these materials. There are also apparent relationships between changing concentrations and meteorological parameters. Interesting fluctuations in the ozone levels with incoming clean air masses may help explain some of the high ozone levels observed by workers elsewhere. Positive correlations between certain known high altitude source region particulate radionuclides and ozone on a daily basis point to the upper level origin of the higher ozone concentrations observed at this site. This view is reinforced by the more usual negative correlations observed between general particulate levels at Quillayute and ozone concentrations when measured on a continuous monitoring basis.