Identification of some plasticizers compounds in landfill leachate

In this work it was described a simple method for extraction of plasticizer compounds (mainly phthalate esters and bisphenol A (BPA)) from landfill leachate samples. The samples were submitted to an extraction procedures based on precipitation, solid phase extraction (SPE) and ionic exchange chromatography (IEC). Firstly the landfill leachate sample was acidified by addition of HCl concentrated, in order to precipitate the organic compounds that are less soluble in water. The precipitate was washed with several solvents. The aqueous phase was then submitted to SPE with XAD-4 resin and IEC with Amberlyst A-27 resin. The instrumental analysis was performed by gas chromatography with mass spectrometer detector (GC/MSD) and the compounds were identified by the GC/MSD library (Wiley) and by using some standard substances. These methodologies allow the isolation and identification of the following compounds: dioctylphthalate, diisobutilphthalate, BPA, benzoic acid, palmitic acid and diisopentylphthalate. The methods are very simple, rapid and selective, for plasticizers extraction from landfill leachate matrices.     

Cover crops and natural vegetation mulch effect achieved by mechanical management with lateral rotary mower in weed population dynamics in citrus

The aim of this study was to obtain information on practical weed management in order to reduce the use of herbicides thereby contributing to the sustainable development of citrus crop. The experiment was carried out under field conditions at the experimental area of the Department of Vegetal Production at the College of Agriculture "Luiz de Queiroz," Piracicaba, SP, Brazil, during the season 2002-2003. Influence of mulches produced by four types of vegetations on the dynamic population of weeds in the line of citrus crop (Citrus sinensis (L.) Osbeck) was evaluated. The experimental design was of factorial randomized blocks (4 x 2), where the treatments were: (i) four types of vegetation: Dolichos lablab L., Cajanus cajan (L.) Millsp, Penisetum glaucum (L.) Leeke, and the natural infestation composed basically by Panicum maximum Jacq.; and (ii) two types of fertilization: directed under canopy and broadcast. Mechanical management of the different vegetations was accomplished using a lateral rotary mower, KAMAQ, I model NINJA MAC 260, projected to release the green cut material under crop canopy, forming a mulch layer. The studied parameters were: (i) counting of weeds per m2 in the crop line after 30, 60, 90, 180, and 210 days following the cutting of existing vegetation; (ii) percentage of covered area by weeds; and (iii) some chemical properties of the soil. It was observed that the natural infestation showed a better weed control when compared with the other treatments, and that the broadcast fertilization, regardless of coverage used, presented a lower number of weeds.     

Allelopathic potential and systematic evaluation of organic extracts from Canavalia ensiformis leaves (Jack beans)

This article describes the assessment of possible allelopathic potential of organic extracts obtained from leaves of Canavalia ensiformis under laboratory conditions. Furthermore, a systematic evaluation of these extracts was carried out using specific protocols developed in capillary electrophoresis (CE) to determine some groups of secondary metabolites. After the identification and quantification of compounds, the effects of compounds on germination of some common weeds was investigated, which are becoming a real problem in pastures in the state of Pará, Brazil.     

Absorption and translocation of 2,4-D in plants of Memora peregrina

The objective of this work was to evaluate absorption and translocation of the herbicide 2,4-D in plants of Memora peregrina. The herbicide 2,4-D was used alone with the formulation DMA 806 BR and associated with the herbicide picloram in the commercial product Padron. Levels of radioactivity on the treated leaves were determined in sample obtained after washing them with methanol and chloroform at different times after the application of the radiolabelled formulation (1, 2, 4, 8, 24, and 48 h). Translocation was evaluated by cutting plants between stem and root. The parts obtained were: root, stem, leaf treated, leaves above the leaf treated, leaves below the leaf treated, and leaf opposite of the leaf treated. These parts were weighted, dried, ground, burnt, and radioactivity in the samples was determined. The results suggest that the translocation of the radioactive herbicide 2,4-D was insignificant in plants of M. peregrina in the two treatments evaluated. Absorption of 14C 2,4-D in the treatment with DMA 806 BR and the mixture of DMA 806 BR plus Padron had the same behavior. These observations explain the inefficient control obtained with this herbicide in plant species under study.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

A net water production model for ultrafiltration including flow direction reversal and chemically assisted backwashing.

Flow direction reversal (FDR) was proposed as a novel method to increase net water production (NWP) during cross-flow ultrafiltration. The design of the pilot-plant study allowed measurement of specific flux recovery after each chemically assisted backwash (BW) combined with FDR and after each FDR at the midpoint of each BW/FDR cycle. The percent recovery of specific flux was higher following FDR (55%) than combined BW and FDR (53%) at lower chemical dosages; however, the percent increase in specific flux recovery by FDR was much lower (20%) when the chemical dose was doubled. A mathematical model was developed to predict the NWP achieved by any combination ofBW/ FDR and FDR frequency. For example, the advantage of introducing FDR was demonstrated at the lower chlorine dose, whereby the percent increase in NWP by alternating 15-minute intervals of BW/FDR with FDR over BW/ FDR alone was 10% for 30-minute BW/FDR intervals and 2% for 15-minute BW/FDR intervals.     

Cement replacement by sugar cane bagasse ash: CO2 emissions reduction and potential for carbon credits

This paper presents a study of cement replacement by sugar cane bagasse ash (SCBA) in industrial scale aiming to reduce the CO₂ emissions into the atmosphere. SCBA is a by-product of the sugar/ethanol agro-industry abundantly available in some regions of the world and has cementitious properties indicating that it can be used together with cement. Recent comprehensive research developed at the Federal University of Rio de Janeiro/Brazil has demonstrated that SCBA maintains, or even improves, the mechanical and durability properties of cement-based materials such as mortars and concretes. Brazil is the world’s largest sugar cane producer and being a developing country can claim carbon credits. A simulation was carried out to estimate the potential of CO₂ emission reductions and the viability to issue certified emission reduction (CER) credits. The simulation was developed within the framework of the methodology established by the United Nations Framework Convention on Climate Change (UNFCCC) for the Clean Development Mechanism (CDM). The State of São Paulo (Brazil) was chosen for this case study because it concentrates about 60% of the national sugar cane and ash production together with an important concentration of cement factories. Since one of the key variables to estimate the CO₂ emissions is the average distance between sugar cane/ethanol factories and the cement plants, a genetic algorithm was developed to solve this optimization problem. The results indicated that SCBA blended cement reduces CO₂ emissions, which qualifies this product for CDM projects.     

Effectiveness of the Local Adaptation Plan of Action to support climate change adaptation in Nepal

A key challenge in climate change adaptation in developing countries as a whole, and to handling global change in particular, is to link local adaptation needs on the one hand, with national adaptation initiatives on the other, so that vulnerable households and communities can directly benefit. This study assesses the impact of the Nepal government’s efforts to promote its Local Adaptation Plan of Action (LAPA) and its applicability to other least developed countries (LDCs). Based on data gathered from two field studies in Nepal, the research shows that the Nepal’s LAPA has succeeded in mobilizing local institutions and community groups in adaptation planning and recognizing their role in adaptation. However, the LAPA approach and implementation have been constrained by sociostructural and governance barriers that have failed to successfully integrate local adaptation needs in local planning and increase the adaptive capacity of vulnerable households. This paper describes the mechanisms of suitable governance strategies for climate change adaptation specific to Nepal and other LDCs. It also argues the need to adopt an adaptive comanagement approach, where the government and all stakeholders identify common local- and national-level mainstreaming strategy for knowledge management, resource mobilization, and institutional development, ultimately using adaptation as a tool to handle global change.     

Cytogenetic evaluation and the association with polymorphisms of the CPY1A1 and NR1I3 genes in individuals exposed to BTEX

The gas station attendants are exposed daily to chemical agents that compose gasoline, such as BTEX (benzene, toluene, ethylbenzene, and xylene), and the exposure to these agents can cause a variety of effects on the human health. Among the various possible cell alterations associated with these exposures are the formation of micronuclei and of binucleated cells which are used as indicators of clastogenic action. Benzene, the main carcinogenic agent, is metabolized to more soluble forms and easily excreted by isoenzymes of cytochrome P450, such as CYP1A1. The CYP1A1 gene is highly polymorphic and one of its allele variations can be detected by the use of restriction endonucleasis MspI and is originated by the transition of a thymine by a cytosine (3798T>C), resulting in the polymorphic allele CYP1A1*2A. The objective of this study was to evaluate the cytogenetic damage induced by the exposure to BTEX and to associate it with the polymorphisms of the CYP1A1 and NR1I3 genes. Samples of exfoliated cells from the oral mucosa of 27 gas station attendants and from a control group were collected. The results found show that the group exposed to BTEX presents significantly higher alterations than those in the control group for micronuclei (MN; 6.85?±?1.33 vs. 2.96?±?1.91, P?<?0.001) and for the total of nuclear alterations observed (MN + binucleated cells (BNC); 9.59?±?4.73 vs. 5.07?±?2.21, P?<?0.001). When comparing the cytological alterations and the genotypes among the exposed individuals for the polymorphism 3798T>C of the CYP1A1 gene, homozygotes TT present MN + BNC significantly higher than carriers of the allele C (10.88?±?5.36 vs. 5.33?±?2.52, P?=?0.028). No association was observed in the control group or for the NR1I3 gene. These results show that molecular and cytogenetic data can be used in the future as tools to monitor individuals exposed to such compounds.     

The influence of environmental factors on the molluscicidal activity of Euphorbia milii latex

Abstract

The present study was undertaken to investigate the influence of biotic (snail size and presence of food during the test) and abiotic factors (temperature, water hardness and concentration of organic materials) on the molluscicidal activity of Euphorbia milii latex. Bioassays were conducted with B. glabrata (10 snails per concentration) and snail lethality was evaluated after 24 hr and 48 hr of exposure to lyophilized latex solutions. Neither the degree of water hardness, nor the presence of food during the test affected latex‐induced snail mortality. The snail size had a minor influence on E.milii‐induced snail lethality. Newly‐hatched (shell diameter ≤ 1mm) as well as young (3–8 mm) snails were slightly less susceptible than older (10–25 mm) mollusks. On the other hand, the molluscicidal effect of E.milii latex was modified by environmental factors such as temperature (i.e. LC₅₀ and LC₉₀ values were halved for every 10°C rise in temperature) and concentration of organic materials in the water (i.e. the higher the concentration of organic matter, the higher the LC₅₀ value). The efficacy of E.milii latex as a molluscicide can be modified by factors such as water temperature and concentration of organic materials, and to a lesser extent by snail size.