Determination of optimum minimum flow from a dam by using energy analysis

The proposed restoration of an abandoned hydroelectric dam on the Quinebaug River, Connecticut, is studied using energy analysis. The analysis considers the effects of alternative minimum flow releases, ranging from 0 to 34 cubic meters per second (cms), on the total energy flow of the affected system. The principal system components affected by differing minimum flows are hydroelectric power generation, aquatic habitat, and gross aquatic ecosystem productivity.The minimum flow alternative resulting in the highest annual energy flow in the affected system is considered optimal. From this purely analytical point of view, the optimum minimum flow is 0 cms, due to the short length and low productivity of the regulated reach, and the lack of floodplain interactions.Simulations of longer and more productive river reaches were conducted. For very short, unproductive reaches, in the absence of a floodplain, the contribution of aquatic community productivity to total system energy flow is negligible compared to hydroelectric generation. Optimum minimum flows are higher for longer and more productive reaches. For such cases the operation of hydroelectric dams could reduce total system energy flow because the energy supplied by hydroelectric generation may be offset by losses in aquatic productivity due to diminished riverine habitat.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

An evaluation of public participation information for land use decisions: public comment,surveys, and participatory mapping

ABSTRACT

Public participation in the form of public meetings and written submissions has been criticised as a democratic ritual that fails to give citizens a real voice in government decisions. Participatory mapping and community surveys are alternative public participation (PP) methods that can augment legally required processes for land use planning. To date, there has been little evaluation research comparing the information content generated by required PP processes and alternative PP sources with respect to local land use decisions. Using multiple development projects from a case study community, we analysed and compared information generated from three different sources of public participation: (1) formal public comment (written submissions), (2) responses to community survey questions, and (3) land use preferences generated from participatory mapping. We found public comment strongly supported development while results from survey questions and participatory mapping methods revealed community ambivalence. The differences in public opinion are attributed to two key factors: the representativeness of participants in the PP process and the specific methods used for measuring public opinion. Community surveys and participatory mapping generated more accurate and representative community information compared to the formal PP process which was characterised by lower participation and vulnerability to special interest manipulation. For local government decision makers, the political risk of broadening PP information appears high relative to the risk of inaccurately assessing public opinion thus limiting adoption of alternative PP methods such as participatory mapping.     

CSHM: Web-based safety and health monitoring system for construction management

INTRODUCTION: This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. METHOD: The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. RESULTS: The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. IMPACT ON INDUSTRY: As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.     

Variation in root density along stream banks

While it is recognized that vegetation plays a significant role in stream bank stabilization, the effects are not fully quantified. The study goal was to determine the type and density of vegetation that provides the greatest protection against stream bank erosion by determining the density of roots in stream banks. To quantify the density of roots along alluvial stream banks, 25 field sites in the Appalachian Mountains were sampled. The riparian buffers varied from short turfgrass to mature riparian forests, representing a range of vegetation types. Root length density (RLD) with depth and aboveground vegetation density were measured. The sites were divided into forested and herbaceous groups and differences in root density were evaluated. At the herbaceous sites, very fine roots (diameter < 0.5 mm) were most common and more than 75% of all roots were concentrated in the upper 30 cm of the stream bank. Under forested vegetation, fine roots (0.5 mm < diameter < 2.0 mm) were more common throughout the bank profile, with 55% of all roots in the top 30 cm. In the top 30 cm of the bank, herbaceous sites had significantly greater overall RLD than forested sites (alpha = 0.01). While there were no significant differences in total RLD below 30 cm, forested sites had significantly greater concentrations of fine roots, as compared with herbaceous sites (alpha = 0.01). As research has shown that erosion resistance has a direct relationship with fine root density, forested vegetation may provide better protection against stream bank erosion.     

Mineralisation of Monuron photoinduced by Fe(III) in aqueous solution

The degradation of Monuron (3-(4-chlorophenyl)-1,1-dimethylurea) photoinduced by Fe(III) in aqueous solution has been investigated. The rate of degradation depends on the concentration of Fe(OH)2+, the most photoreactive species in terms of *OH radical formation. These *OH radicals are able to degrade Monuron until total mineralisation. The primordial role of the speciation of Fe(III)-hydroxy complex in aqueous solution, for the efficiency of the elimination of pollutant, was shown and explained in detail. The formation of Fe(II) in the irradiated solution was monitored and correlated with the total organic carbon evolution. Degradation photoproducts were identified and a mechanism of degradation is proposed.     

The ecological relevance of current approaches for environmental protection from exposure to ionising radiation

This paper discusses the current approaches to environmental protection from ionising radiation from an ecological perspective, highlighting the need to understand fully what we are trying to protect. Ecologically relevant endpoints for environmental protection are discussed along with the need to integrate protection from ionising radiation with the approaches adopted for non-radioactive contaminants. A possible integrated assessment approach is outlined.     

Heavy metals in four fish species from the French coast of the Eastern English Channel and Southern Bight of the North Sea

Shallow coastal waters act as nurseries for various fish species and have been recognized as essential fish habitat. We studied heavy metal concentrations in four fish species (plaice, dab, flounder and cod) as an indicator of large-scale habitat quality. The study took place along the French coasts between the Eastern English Channel and the Southern Bight of the North Sea. All species show different concentrations of measured metals (e.g., Cd, Cu, Mn and Pb) in liver but not in muscle. The highest concentrations are found for the flounder and the lowest for cod which is consistent with their habitat and diet. Although our results do not highlight levels of appreciable pollution within the study area, inter-site differences are mainly observed in the muscle tissues and are generally in agreement with the known environmental data (e.g., anthropogenic pressure). However, in the Bay of Seine, one of the most contaminated estuaries in Europe, metal concentrations are in the same range or even lower than those found in fish collected from areas distant from any anthropogenic pressures. At one site, the comparisons of the Cd, Cu and Pb concentrations between healthy and diseased dabs have been carried out on the muscle and liver tissues. The results of this preliminary study show a relationship between metal concentrations and the pathological status of the fish. The use of fish health as indicator of habitat quality is discussed.     

Modeling flow and nitrate fate at catchment scale in Brittany (France)

In the intensive pig-farming (Sus scrofa) area of Brittany (western France), many surface and subsurface water resources are contaminated by nitrate (NO3) with concentrations that chronically exceed the European Community 50 mg L(-1) drinking standard. To ensure sustainable water supply, the fate of NO3 must be considered in both surface water and ground water. The fate of N was investigated in a Britain catchment, the Co?t-Dan watershed, with an integrated management tool: the hydrological SWAT model coupled with the ground water model MODFLOW, and its companion contaminant and solute transport model MT3DMS. The model was validated with respect to water quantity during a 6-yr period and for the NO3 concentration during a 44-mo period, at two gauging stations in the catchment. The coupled models reproduced accurately the measurements. At the basin outlet, the Nash-Sutcliffe coefficients were 0.88 for monthly flow for the entire period and 0.87 for monthly N load. Alternative scenarios were simulated and showed potential benefits of decreasing manure application from 210 to 170 kg N ha(-1) as required by the European Commission Nitrates Directive.     

Observations on the workshop as a means of improving communication between holders of traditional and scientific knowledge

Traditional ecological knowledge (TEK) and the information and insights it offers to natural resource research and management have been given much attention in recent years. On the practical question of how TEK is accessed and used together with scientific knowledge, most work to date has examined documentation and methods of recording and disseminating information. Relatively little has been done regarding exchanges between scientific and traditional knowledge. This paper examines three workshop settings in which such exchanges were intended outcomes. The Barrow Symposium on Sea Ice, the Exxon Valdez Oil Spill Restoration Program Synthesis/Information Workshops, and the Alaska Beluga Whale Committee illuminate certain features of the preparation, format, and context of workshops or series of workshops and their eventual outcomes and influence. The examples show the importance of long-term relationships among participants and thorough preparation before the actual workshop. Further research should look more systematically at the factors that influence the success of a given workshop and the various ways in which participants perceive success.