Analytical methods for the determination of alachlor, metolachlor, simazine and atrazine mobility in soils

A method for the determination of the mobility of the herbicides, alachlor, metolachlor, simazine and atrazine in soil is described. The method is based on the use of soil thin-layer chromatography (TLC) and does not require the use of radiolabelled compounds. Soil on the TLC plate after development was separated into various bands, the material in each band was extracted with solvents and analyzed by gas chromatography.     

Semicontinuous PM2.5 sulfate and nitrate measurements at an urban and a rural location in New York: PMTACS-NY summer 2001 and 2002 campaigns

Several collocated semicontinuous instruments measuring particulate matter with particle sizes < or =2.5 microm (PM2.5) sulfate (SO4(2-)) and nitrate (NO3-) were intercompared during two intensive field campaigns as part of the PM2.5 Technology Assessment and Characterization Study. The summer 2001 urban campaign in Queens, NY, and the summer 2002 rural campaign in upstate New York (Whiteface Mountain) hosted an operation of an Aerosol Mass Spectrometer, Ambient Particulate Sulfate and Nitrate Monitors, a Continuous Ambient Sulfate Monitor, and a Particle-Into-Liquid Sampler with Ion Chromatographs (PILS-IC). These instruments provided near real-time particulate SO4(2-) and NO3- mass concentration data, allowing the study of particulate SO4(2-)/NO3- diurnal patterns and detection of short-term events. Typical particulate SO4(2-) concentrations were comparable at both sites (ranging from 0 to 20 microg/m3), while ambient urban particulate NO3- concentrations ranged from 0 to 11 microg/m3 and rural NO3- concentration was typically less than 1 microg/m3. Results of the intercomparisons of the semicontinuous measurements are presented, as are results of the comparisons between the semicontinuous and time-integrated filter-based measurements. The comparisons at both sites, in most cases, indicated similar performance characteristics. In addition, charge balance calculations, based on major soluble ionic components of atmospheric aerosol from the PILS-IC and the filter measurements, indicated slightly acidic aerosol at both locations.     

An examination of the 6:00 a.m.-9:00 a.m. measurements of ozone precursors in the New York City metropolitan area

In recent years, ambient measurements of hourly ozone precursor concentrations, namely speciated and total nonmethane organic compounds (NMOCs), have become available through the Photochemical Assessment Monitoring Stations (PAMS) program. Prior to this, NMOCs were measured in the central business district using a canister to obtain the 3-hr integrated sample for the 6:00 a.m.-9:00 a.m. period. Such sampling had been carried out annually for nearly a decade at three locations in the New York City metropolitan area. The intent of these measurements, along with measurements of the other ozone precursor, NO(x), was to provide an understanding of ozone formation and the emissions loading and mix in the urban area. The analysis of NMOC and NO(x) measurements shows a downward trend in the case of NMOC. In addition, we compared the canister-based NMOC concentrations with data obtained from the PAMS program for the 6:00 a.m.-9:00 a.m. period. Analysis of the NMOC concentrations reveals poor spatial correlation between the various monitors, reflecting the effect of localized emissions. This suggests that NMOC measurements made at a single location cannot be viewed as representative of the entire region. On the other hand, correlations were found to be higher among the NO(x) monitors, indicating the commonality of emission     

14C-dimethoate residues in olive oil during oil processing

An olive tree was treated twice in the field with 14C-dimethoate (237.7 muCi, 2.4 g) and 14C residues were determined in the olive fruits at harvest. The fruits were crushed and pressed to extract the crude oil, then refined by neutralization, bleaching and deodorization. The crude oil contained 14.1% of the total 14C in the olive fruits. Neutralization resulted in a reduction of 14C by about 50% of the total 14C residues in oil. Bleaching and deodorization processes further reduced the 14C residues and the refined oil contained 31.6% (which corresponds to 4.4% of 14C residues of the total 14C in olive fruits) of the total 14C in the crude oil. Industrially extracted crude oil was fortified with 14C-dimethoate at 1.8 mg kg-1 (0.02 muCi) level and subjected to the same refining process. A sharp decrease in the amount of 14C was observed by neutralization and the amount of 14C remaining in the refined oil was about 7.3% of the total 14C in the crude fortified oil. The data suggest that the 14C residues in the aged and the fortified oil amples were not of the same nature. The terminal 14C residue in the refined oil obtained from the field experiment did not contain dimethoate and/or its oxon.     

Effects of herbicide and insecticide interaction on soil entomofauna under maize crop

The aim of this study was to evaluate the impact of the herbicide mixture nicosulfuron + atrazine, with or without the insecticide chlorpyrifos, onto soil entomofauna under maize crop. The treatments, applied 25 days after maize emergence, were represented by a weeded control without insecticide and herbicide, a weeded control with chlorpyrifos, and mixtures of nicosulfuron + atrazine, with or without chlorpyrifos. Arthropods populations, on the soil surface, as well as inside the soil under maize, were principally represented by mites (Arachnida: Acari), decomposer collembolans (Hexapoda:Parainsecta:Collembola) and predator ants (Hymenoptera:Formicidae). The nicosulfuron + atrazine mixture with chlorpyrifos and the isolated chlorpyrifos reduced the population dynamics of all insect groups on the soil surface compared to the weeded control. In the soil, mite and ant populations were reduced after application of the herbicide mixture with chlorpyrifos and of the isolated chlorpyrifos.     

Matrix-immobilized organoclay for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Sorbent materials consisting of organoclay immobilized onto the surface of a solid support were evaluated for use in pentachlorophenol (PCP) and polycyclic aromatic hydrocarbon (PAH) remediation of groundwater at a creosote-contaminated Superfund site. Cetylpyridinium-exchanged low pH montmorillonite clay (CP-LPHM) was bonded to either sand (CP-LPHM/sand) or granular activated carbon (GAC) (CP-LPHM/GAC) using the free acid form of carboxymethylcellulose as an adhesive. Effluent from an oil-water separator was eluted through equal bed volumes of composite (4 g 3:2 CP-LPHM/GAC or 13 g CP-LPHM/sand), affinity-extracted, and quantitatively analyzed by GC/MS. PCP, naphthalene, fluorene, phenanthrene, pyrene, and total PAHs were initially reduced by both CP-LPHM/GAC (> or =99%, 61%, 99%, > or =99%, 97%, and 94%, respectively) and CP-LPHM/sand (90%, 70%, 94%, 95%, 93%, and 86%, respectively). Complete breakthrough of naphthalene occurred after approximately 15 h of elution through 3:2 CP-LPHM/GAC and 22 h through CP-LPHM/sand. PCP showed complete breakthrough following 18 h of elution through 3:2 CP-LPHM/GAC and 26 h through CP-LPHM/sand. However, 50% breakthrough was not attained for higher molecular weight PAHs, as fluoranthene, pyrene, benzo[a]anthracene, and chrysene continued to be greatly reduced with both 3:2 CP-LPHM/GAC (98%, 95%, 94%, and 95%, respectively) and CP-LPHM/sand (75%, 73%, 76%, and 78%, respectively) after 48 h of continuous elution. Results confirm prior studies, indicating that these organoclay-containing composites have a high capacity for contaminants found in wood preserving waste. Further, results suggest that the inclusion of CP-LPHM may be useful as part of an effective strategy for groundwater remediation of high concentrations of PCP and PAHs, in particular high molecular weight and carcinogenic PAHs.     

Concentrations of dioxin-like PCB congeners in unweathered Aroclors by HRGC/HRMS using EPA Method 1668A

We have determined the congener compositions of nine commercial Aroclor products of polychlorinated biphenyls (PCBs) to the sub-part-per-million level using high-resolution gas chromatography combined with high-resolution mass spectrometry according to US Environmental Protection Agency (EPA) Method 1668A. These Aroclor composition data should allow improved characterization and risk assessment of PCB contamination at hazardous waste sites, particularly for dioxin-like PCB congeners. By combining the data on the concentrations of each dioxin-like congener with its World Health Organization toxicity equivalency factor, we have established dioxin toxic equivalent concentrations for each pure Aroclor product.     

An operational assessment of the application of the relative reduction factors in the demonstration of attainment of the 8-hr ozone National Ambient Air Quality Standard

The U.S. Environmental Protection Agency in 1997 revised the 1-hr ozone (O3) National Ambient Air Quality Standard (NAAQS) to one based on an 8-hr average, resulting in potential nonattainment status for substantial portions of the eastern United States. The regulatory process provides for the development of a state implementation plan that includes a demonstration that the projected future O3 concentrations will be at or below the NAAQS based on photochemical modeling and analytical techniques. In this study, four photochemical modeling systems, based on two photochemical models, Community Model for Air Quality and the Comprehensive Air Quality Model with extensions, and two emissions processing models, Sparse Matrix Optimization Kernel for Emissions and Emissions Modeling System, were applied to the eastern United States, with emphasis on the northeastern Ozone Transport Region in terms of their response to oxides of nitrogen and volatile organic carbon-focused controls on the estimated design values. With the 8-hr O3 NAAQS set as a bright-line test, it was found that a given area could be termed as being in or out of attainment of the NAAQS depending upon the modeling system. This suggests the need to provide an estimate of model-to-model uncertainty in the relative reduction factor (RRF) for a better understanding of the uncertainty in projecting the status of an area's attainment. Results indicate that the model-to-model differences considered in this study introduce     

Absorption and translocation of 2,4-D in plants of Memora peregrina

The objective of this work was to evaluate absorption and translocation of the herbicide 2,4-D in plants of Memora peregrina. The herbicide 2,4-D was used alone with the formulation DMA 806 BR and associated with the herbicide picloram in the commercial product Padron. Levels of radioactivity on the treated leaves were determined in sample obtained after washing them with methanol and chloroform at different times after the application of the radiolabelled formulation (1, 2, 4, 8, 24, and 48 h). Translocation was evaluated by cutting plants between stem and root. The parts obtained were: root, stem, leaf treated, leaves above the leaf treated, leaves below the leaf treated, and leaf opposite of the leaf treated. These parts were weighted, dried, ground, burnt, and radioactivity in the samples was determined. The results suggest that the translocation of the radioactive herbicide 2,4-D was insignificant in plants of M. peregrina in the two treatments evaluated. Absorption of 14C 2,4-D in the treatment with DMA 806 BR and the mixture of DMA 806 BR plus Padron had the same behavior. These observations explain the inefficient control obtained with this herbicide in plant species under study.     

Conditions for effective removal of pyrene from an artificially contaminated soil using Pseudomonas aeruginosa 57SJ rhamnolipids

The efficacy of a new rhamnolipid biosurfactants mixture to enhance the removal of pyrene from a soil artificially contaminated was investigated. The molar solubilization ratio (MSR) and the partition coefficient between the micelles and water (log K(m)) were found to be 7.5 x 10(-3) and 5.7, respectively. From soil column studies, the pyrene removal increased linearly with the concentration of the injected biosurfactants solution above the effective critical micellar concentration (0.4 g L(-1)). Flushing with a 5.0 g L(-1) biosurfactants solution increased the pyrene concentration in the effluent by 178 times. At high biosurfactants' concentrations (2.5 and 5.0 g L(-1)), the cumulative pyrene recovery reached 70%. This pyrene remobilization takes place independently of the soil organic carbon solubilization. This study provides a combination of batch and column experiments in order to find the conditions for effective soil remediation using a new rhamnolipids mixture.