Sorption of atmospheric ammonia by soil and perennial grass downwind from two large cattle feedlots

Livestock manure in feedlots releases ammonia (NH3), which can be sorbed by nearby soil and plants. Ammonia sorption by soil and its effects on soil and perennial grass N contents downwind from two large cattle feedlots in Alberta, Canada were investigated from June to October 2002. Atmospheric NH3 sorption was measured weekly by exposing air-dried soil at sampling points downwind along 1700-m transects. The amount of NH3 sorbed by soil was 2.60 to 3.16 kg N ha(-1) wk(-1) near the source, declining to about 0.25 kg N ha(-1) wk(-1) 1700 m downwind, reflecting diminishing atmospheric NH3 concentrations. Ammonia sorption at a control site away from NH3 sources was much lower: 0.085 kg N ha(-1) wk(-1). Based on these rates, about 19% of emitted NH3 is sorbed by soil within 1700 m downwind of feedlots. Field soil and grass samples from the transect lines were analyzed for total N (TN) and KCl-extractable N content (soil only). Nitrate N content in field soil followed a trend similar to that of atmospheric NH3 sorption. Soil TN contents, because of high background levels, showed no clear pattern. The TN content of grass, downwind of the newer feedlot, followed a pattern similar to that of NH3 sorption; downwind of the older feedlot, grass TN was correlated to soil TN. Our results suggest that atmospheric NH3 from livestock operations can contribute N to local soil and vegetation, and may need to be considered when determining fertilizer rates and assessing environmental impact.     

Sustainable red ceramic block: recycling of a sewage sludge as raw material

Journal of Material Cycles and Waste Management - Sewage sludge (SS) is a residue resulting from wastewater treatment, which is widely increasing due to population growth and economic development....     

Statistical analysis in estimating probable concentrations of representative chemical species in leachate: a solution for the source term of new or unmonitored landfills

Journal of Material Cycles and Waste Management - Leakage modeling can be crucial for environmental management and control of waste landfills. However, defining boundary conditions for these models...     

Impact of photocatalytic remediation of pollutants on urban air quality

In the recent years, photocatalytic self-cleaning and “depolluting” materials have been suggested as a remediation technology mainly for NO _x and aromatic VOCs in urban areas. A number of products incorporating the aforementioned technology have been made commercially available with the aim to improve urban air quality. These commercial products are based on the photocatalytic properties of a thin layer of TiO₂ at the surface of the material (such as glass, pavement, etc.) or embedded in paints or concrete. The use of TiO₂ photocatalysts as an emerging air pollution control technology has been reported in many locations worldwide. However, up to now, the effectiveness measured in situ and the expected positive impact on air quality of this relatively new technology has only been demonstrated in a limited manner. Assessing and demonstrating the effectiveness of these depolluting techniques in real scale applications aims to create a real added value, in terms of policy making (i.e., implementing air quality strategies) and economics (by providing a demonstration of the actual performance of a new technique).

Open image in new window

     

A Two-Sector Model of Economic Growth with Endogenous Technical Change and Pollution Abatement

Environmental Modeling & Assessment - We provide insights into the relationships between technological development, economic growth, and pollution accumulation using a two-sector model of...     

Enhancement of gasworks groundwater remediation by coupling a bio-electrochemical and activated carbon system

Environmental Science and Pollution Research - Here, we show the electrical response, bacterial community, and remediation of hydrocarbon-contaminated groundwater from a gasworks site using a...     

Spatial and seasonal variations of atmospheric BTEX,sulfur dioxide,nitrogen dioxide,and ozone concentrations in Istanbul,and health risk assessment of BTEX

Volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, and xylene (BTEX) along with inorganic gases such as sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and ozone (O₃) levels were found in the atmosphere of the Kemerburgaz region where environmental issues became a major concern due to nearby incineration plant and waste disposal facility in Istanbul. Ten sampling locations were selected considering possible sources in the study area. The sampling areas were classified as suburban, industrial, rural, and background regions. Sampling campaigns were carried out for four-week periods from March 2011 to August 2012 in all locations. Elevated concentrations of BTEX around roads and the industrial locations indicated that vehicle exhaust and industrial activities were the main sources of these pollutants in the region. Concentrations of NO₂ were also high around roads. A much more uniform distribution was observed for SO₂ during sampling periods. However higher levels were observed at suburban locations due to the use of coal for local heating especially during winter. Ozone concentrations were low at the industrial locations and roadsides, but high in suburban and rural locations downwind from the sources. The results of these organic and inorganic gases meet the national limit values. Furthermore, a lifetime risk assessment methodology was used to evaluate the potential adverse health effects of BTEX. The mean cancer risk level for benzene was estimated to be 7.71E-07 that is lower than assigned acceptable risk level of 1.0E-04. Toluene, ethylbenzene, and xylenes were lower than the specified level of 1.0 with respect to mean non-carcinogenic risks. The findings reveal that determined BTEX emissions do not pose a health threat to residents in the studied region.     

Quaternized Chitosan for Ecological Treatment of Bauxite Mining Effluents

One of the major concerns of mining companies is the safety of their tailing dams. Among the cares required to operate such a dam, a proper treatment of the effluent composing its waste stands out, since that, waste must be treated before returned to the environment. In the process of bauxite beneficiation, the effluent level of turbidity is the discard parameter that deserves attention. In this work, quaternized chitosan (TMC_Cl^?) derivative with cationic charge was synthetized and investigated to be used as coagulant in bauxite treatment for tailing dam effluent. The chitosan (CHT) was quaternized by methylation reaction. The quaternized chitosan structure was characterized by the following techniques: FTIR Spectroscopy and ¹H nuclear magnetic resonance (NMR). Its thermal stability was analyzed by differential scanning calorimetry (DSC) and thermogravimetric analysis. After quaternized chitosan was obtained, analysis with aluminum sulfate, protonated and quaternized chitosan were executed in jar-test apparatus. The tests were conducted in order to find the optimum pH, velocity gradient, coagulant and alkalizer dosages, as well as coagulation, flocculation and decantation time. The studied coagulants showed good results and reduced the effluent turbidity to levels below determined by legislation. By comparing the coagulants, it was possible to state that quaternized chitosan presented higher reduction of effluent turbidity levels; the tests were performed in the same conditions.     

Adsorption Kinetics of Dyes in Single and Binary Systems Using Cyanoguanidine-Crosslinked Chitosan of Different Deacetylation Degrees

The crosslinking of chitosan with cyanoguanidine shows some advantages, such as the improved the stability in acid solutions and the decrease of adsorbent cost. In this work, cyanoguanidine-crosslinked chitosan and pure chitosan were prepared to apply in the adsorption of Food Yellow 4 (FY4) and Food Blue 2 (FB2), in single and binary systems. Effects of pH and deacetylation degree (DD) of chitosan in adsorption were evaluated. The adsorbents were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The kinetic data were analyzed by pseudo-first order, pseudo-second order and Avrami models. The conditions of pH 3 and DD 95% were the more suitable to reach the highest adsorption capacities in all experimental assays. Under these conditions, the adsorption capacities for FY4 were approximately of 392 and 200 mg g^?1 and, for FB2 were approximately of 370 and 184 mg g^?1, respectively, in the single and binary systems. The Avrami model was suitable to represent the kinetic curves in all conditions, and the highest adsorption capacities were found for FY4 in binary aqueous system, being for the pure chitosan of 229 mg g^?1 and crosslinked chitosan of 218 mg g^?1. The Langmuir and extended Langmuir models presented a good fit to the equilibrium data in both systems. It was found that, the chitosan crosslinked with cyanoguanidine improved the chemical stability of chitosan as adsorbent.