Modeling of Cs migration in soils using an 80-year soil archive: role of fertilizers and agricultural amendments

An 80-year soil archive, the 42-plot experimental design at the INRA in Versailles (France), is used here to study long-term contamination by ¹³⁷Cs atmospheric deposition and the fate of this radioisotope when associated with various agricultural practices: fallow land, KCl, NH₄(NO₃), superphosphate fertilizers, horse manure and lime amendments. The pertinence of a simple box model, where radiocaesium is supposed to move downward by convectional mechanisms, is checked using samples from control plots which had been neither amended, nor cultivated since 1928. This simple model presents the advantage of depending on only two parameters: α, a proportional factor allowing the historical atmospheric ¹³⁷Cs fluxes to be reconstructed locally, and k, an annual loss coefficient from the plow horizon. Another pseudo-unknown is however necessary to run the model: the shape of historical ¹³⁷Cs deposition, but this function can be easily computed by merging several curves previously established by other surveys. A loss of ∼1.5% per year from the plow horizon, combined with appropriate fluxes, provides good concordance between simulated and measured values. In the 0–25 cm horizon, the residence half time is found to be ∼18 yr (including both migration and radioactive decay). Migration rate constants are also calculated for some plots receiving continuous long-term agricultural treatments. Comparison with the control plots reveals significant influence of amendments on ¹³⁷Cs mobility in these soils developed from a unique genoform.     

Mapping of tritium emissions using absorption vapour samplers

Püspökszilágy Radioactive Waste Treatment and Disposal Facility (RWTDF) is a typical near-surface engineered repository designated to store low- and intermediate-level wastes from various institutes, research facilities and hospitals in Hungary. Two automatic combined ¹⁴C–tritium sampling units installed at the facility sample the air 2 m above surface. The one installed near the vaults detects tritium (T) activities two orders of magnitude higher than the far reference sampling unit. To localize the T emissions, 19 small absorption vapour samplers filled with silica gel were settled onto the ground surface. After the saturation of the silica gel, the water was recovered and its T concentration was measured with a low-background liquid scintillation counter. The absorption vapour samplers are cheap, simple and easy-to-use. We present the samplers and the T distribution map constructed from the data, which helps to localize the T emission.     

Short-term seasonal variability in Be wet deposition in a semiarid ecosystem of central Argentina

The ⁷Be wet deposition has been intensively investigated in a semiarid region at San Luis Province, Argentina. From November 2006 to May 2008, the ⁷Be content in rainwater was determined in 58 individual rain events, randomly comprising more than 50% of all individual precipitations at the sampling period. ⁷Be activity concentration in rainwater ranged from 0.7 ± 0.3 Bq l⁻¹ to 3.2 ± 0.7 Bq l⁻¹, with a mean value of 1.7 Bq l⁻¹ (sd = 0.53 Bq l⁻¹). No relationship was found between ⁷Be content in rainwater and (a) rainfall amount, (b) precipitation intensity and (c) elapsed time between events. ⁷Be ground deposition was found to be well correlated with rainfall amount (R = 0.92). For the precipitation events considered, the ⁷Be depositional fluxes ranged from 1.1 to 120 Bq m⁻², with a mean value of 32.7 Bq m⁻² (sd = 29.9 Bq m⁻²). The annual depositional flux was estimated at 1140 ± 120 Bq m⁻² y⁻¹. Assuming the same monthly deposition pattern and that the ⁷Be content in soil decreases only through radioactive decay, the seasonal variation of ⁷Be areal activity density in soil was estimated. Results of this investigation may contribute to a valuable characterization of ⁷Be input in the explored semiarid ecosystem and its potential use as tracer of environmental processes.     

The food-print of Paris: long-term reconstruction of the nitrogen flows imported into the city from its rural hinterland

Between the tenth and twentieth century the population of Paris city increased from a few thousand to near 10 million inhabitants. In response to the growing urban demand during this period, the agrarian systems of the surrounding rural areas tremendously increased their potential for commercial export of agricultural products, made possible by a surplus of agricultural production over local consumption by humans and livestock in these areas. Expressed in terms of nitrogen, the potential for export increased from about 60 kg N/km2/year of rural territory in the Middle Ages, to more than 5,000 kg N/km2/year from modern agriculture. As a result of the balance between urban population growth and rural productivity, the rural area required to supply Paris (i.e. its food-print) did not change substantially for several centuries, remaining at the size of the Seine watershed surrounding the city (around 60,000 km2). The theoretical estimate of the size of the supplying hinterland at the end of the eighteenth century is confirmed by the figures deduced from the analysis of the historical city toll data (octroi). During the second half of the twentieth century, the ‘food-print’ of Paris reduced in size, owing to an unprecedented increase in the potential for commercial export associated with modern agricultural systems based on chemical N fertilization. We argue that analysing the capacity of territories to satisfy the demand for nitrogen-containing food products of local or distant urban population and markets might provide new and useful insights when assessing world food resource allocation in the context of increasing population and urbanization.     

A new approach to quantify the degradation kinetics of linuron with UV, ozonation and UV/O3 processes

The degradation of linuron, one of phenylurea herbicides, was investigated for its reaction kinetics by different treatment processes including ultraviolet irradiation (UV), ozonation (O₃), and UV/O₃. The decay rate of linuron by UV/O₃ process was found to be around 3.5 times and 2.5 times faster than sole-UV and ozone-alone, respectively. Experimental results also indicate overall rate constants increased exponentially with pH above 9.0 while the increase of rate constants with pH below 9 is insignificant in O₃ system. All dominant parameters involved in the three processes were determined in the assistant of proposed linear models in this study. The approach was found useful in predicting the process performances through the quantification of quantum yield (rate constant for the formation of free radical HOO⁻ from ozone decomposition at high pH), rate constant of linuron with ozone (k_O3,LNR), rate constant of linuron with hydroxyl radical (k_OH,LNR), and α (the ratio of the production rate of OH and the decay rate of ozone in UV/O₃ system).     

Converging hydrostatic and hydromechanic concepts of preferential flow definitions

The boundary between preferential flow and Richards-type flow is a priori set at a volumetric soil water content θ at which soil water diffusivity D (θ) = η (= 10^− 6 m² s^− 1), where η is the kinematic viscosity. First we estimated with a hydrostatic approach from soil water retention curves the boundary, θ^K, between the structural pore domain, in which preferential flow occurs, and the matrix pore domain, in which Richards-type flow occurs. We then compared θ^K with θ that was derived from the respective soil hydrological property functions of same soil sample. Second, from in situ investigations we determined 96 values of θ^G as the terminal soil water contents that established themselves when the corresponding water-content waves of preferential flow have practically ceased. We compared the frequency distribution of θ^G with the one of θ that was calculated from the respective soil hydrological property functions of 32 soil samples that were determined with pressure plate apparatuses in the laboratory. There is support of the notion that θ^K ≈ θ^G ≈ θ, thus indicating the potential of θ to explain more generally what constitutes preferential flow. However, the support is assessed as working hypothesis on which to base further research rather than a procedure to a clear-cut identification of preferential flow and associated flow paths.     

Biodegradation potential of MTBE in a fractured chalk aquifer under aerobic conditions in long-term uncontaminated and contaminated aquifer microcosms

The potential for aerobic biodegradation of MTBE in a fractured chalk aquifer is assessed in microcosm experiments over 450 days, under in situ conditions for a groundwater temperature of 10 °C, MTBE concentration between 0.1 and 1.0 mg/L and dissolved O₂ concentration between 2 and 10 mg/L. Following a lag period of up to 120 days, MTBE was biodegraded in uncontaminated aquifer microcosms at concentrations up to 1.2 mg/L, demonstrating that the aquifer has an intrinsic potential to biodegrade MTBE aerobically. The MTBE biodegradation rate increased three-fold from a mean of 6.6 ± 1.6 μg/L/day in uncontaminated aquifer microcosms for subsequent additions of MTBE, suggesting an increasing biodegradation capability, due to microbial cell growth and increased biomass after repeated exposure to MTBE. In contaminated aquifer microcosms which also contained TAME, MTBE biodegradation occurred after a shorter lag of 15 or 33 days and MTBE biodegradation rates were higher (max. 27.5 μg/L/day), probably resulting from an acclimated microbial population due to previous exposure to MTBE in situ. The initial MTBE concentration did not affect the lag period but the biodegradation rate increased with the initial MTBE concentration, indicating that there was no inhibition of MTBE biodegradation related to MTBE concentration up to 1.2 mg/L. No minimum substrate concentration for MTBE biodegradation was observed, indicating that in the presence of dissolved O₂ (and absence of inhibitory factors) MTBE biodegradation would occur in the aquifer at MTBE concentrations (ca. 0.1 mg/L) found at the front of the ether oxygenate plume. MTBE biodegradation occurred with concomitant O₂ consumption but no other electron acceptor utilisation, indicating biodegradation by aerobic processes only. However, O₂ consumption was less than the stoichiometric requirement for complete MTBE mineralization, suggesting that only partial biodegradation of MTBE to intermediate organic metabolites occurred. The availability of dissolved O₂ did not affect MTBE biodegradation significantly, with similar MTBE biodegradation behaviour and rates down to ca. 0.7 mg/L dissolved O₂ concentration. The results indicate that aerobic MTBE biodegradation could be significant in the plume fringe, during mixing of the contaminant plume and uncontaminated groundwater and that, relative to the plume migration, aerobic biodegradation is important for MTBE attenuation. Moreover, should the groundwater dissolved O₂ concentration fall to zero such that MTBE biodegradation was inhibited, an engineered approach to enhance in situ bioremediation could supply O₂ at relatively low levels (e.g. 2–3 mg/L) to effectively stimulate MTBE biodegradation, which has significant practical advantages. The study shows that aerobic MTBE biodegradation can occur at environmentally significant rates in this aquifer, and that long-term microcosm experiments (100s days) may be necessary to correctly interpret contaminant biodegradation potential in aquifers to support site management decisions.     

Impact of initial and boundary conditions on preferential flow

Preferential flow in soil is approached by a water-content wave, WCW, that proceeds downward from the ground surface. WCWs were obtained from sprinkler experiments with infiltration rates varying from 5 to 40 mm h^− 1. TDR-probes and tensiometers measured volumetric water contents θ(z,t) at seven depths, and capillary heads, h(z,t) at six depths in a column of an undisturbed soil. The wave is characterized by the velocity of the wetting front, c_W, the amplitude, w_S, and the final water content, θ. We tested with uni-variate and bi-variate linear regressions the impacts of initial volumetric water contents, θ_ini, and input rates, q_S, on c_W, w_S and θ.The test showed that θ_ini influenced θ and w_S and q_S effected c_W. The expected proportionality of w_S ≈ qs^1/3 was weak and c_W ≈ qs^2/3 was strong.