Evaluation of violations in water quality standards in the monitoring network of São Francisco River basin,the third largest in Brazil

The São Francisco River is the largest river located entirely within Brazil, and water scarcity problems have been a major concern of Brazilian society and government. Water quality issues are also a concern and have worsened with the recent intensification of urbanization and industrialization. In this study, violations to water quality standards established by local legislation were calculated as a percentage for 26 selected parameters over a monitoring period of 14 years. The violation percentages were analyzed spatially using the Kruskal-Wallis test, followed by multiple comparison analysis. Temporal analysis was performed using the Mann-Kendall test and Spearman correlation. Some parameters could be identified as cause for concern due to high violation levels, such as the fecal coliform indicator (FCI) and phosphorus—both related to domestic and effluent disposal without treatment or with insufficient treatment—and color, turbidity, manganese, and total suspended solids—which can be affected by erosive processes of natural and anthropogenic causes. The study found that these violations are concentrated in the most urbanized and industrialized areas of the basin. Some metallic parameters, such as iron and arsenic violations, may be related to mining activities in the rich soil of the Iron Quadrangle area located within the Minas Gerais State. Trend analysis results indicated that most monitoring stations did not have significant modification (elevation or reduction) trends over time, which, together with the high violation percentages, might indicate the maintenance of a scenario of constant pressure upon water resources, in particular in those more urbanized areas.     

Electrochemical combustion of herbicide mecoprop in aqueous medium using a flow reactor with a boron-doped diamond anode

The anodic oxidation of 1.8l of solutions with mecoprop (2-(4-chloro-2-methylphenoxy)-propionic acid or MCPP) up to 0.64 g l(-1) in Na2SO4 as background electrolyte within the pH range 2.0-12.0 has been studied using a flow plant containing a one-compartment filter-press electrolytic reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode, both of 20-cm2 area. Electrolyses carried out in batch under steady conditions and operating at constant current density between 50 and 150 mA cm(-2) always yield complete mineralization due to the great concentration of hydroxyl radical generated at the BDD anode. The degradation rate is practically independent of pH and Na2SO4 concentration, but it becomes faster with increasing MCPP concentration, current density, temperature and liquid flow rate. The effect of these parameters on current efficiency and energy cost has also been investigated. Generated weak oxidants such as H2O2 and peroxodisulfate ion have little influence on the mineralization process. The kinetics for the herbicide decay follows a pseudo first-order reaction with a higher rate constant when current density increases. Aromatic products such as 4-chloro-o-cresol, 2-methylhydroquinone and 2-methyl-p-benzoquinone, and generated carboxylic acids such as maleic, fumaric, lactic, pyruvic, tartronic, acetic and oxalic, have been identified as intermediates by chromatographic techniques. The initial chlorine is completely released in the form of chloride ion, which is slowly oxidized to Cl2 at the BDD anode. A reaction pathway for MCPP mineralization involving all products detected is proposed.     

The Input and Transmission of Fallout Radionuclides Through Redó, a High Mountain Lake in the Spanish Pyrenees

Fallout radionuclides have increasing value as tracers of pathways for pollutant transport through catchment/lake systems, in addition to their more traditional role in dating sediment records. The objectivesof this study, carried out within the EU MOLAR project, were tomeasure atmospheric fluxes of fallout ²¹⁰Pb, ¹³⁷Cs and ⁷Be at Redó, to establish mass balances for theseradionuclides, and test and validate models of pollutant transport through the lake and its catchment. This was achieved by comparing measured fluxes and concentrations in the water column with theoretical estimates using simple compartment models. Several interesting points emerged. Differences betweensoil core and rainwater measurements suggest that Saharan dust may be an important source of fallout ²¹⁰Pb. Fluxes throughthe water column had a clear seasonal trend reflecting winter icecover. Significant concentrations of ¹³⁷Cs are still presentin the water column, due to continued inputs from the catchment and/or remobilisation from the bottom sediments.     

14C content in vegetation in the vicinities of Brazilian nuclear power reactors

(14)C specific activities were measured in grass samples collected around Brazilian nuclear power reactors. The specific activity values varied between 227 and 299 Bq/kg C. Except for two samples which showed (14)C specific activities 22% above background values, half of the samples showed background specific activities, and the other half had a (14)C excess of 1-18%. The highest specific activities were found close to the nuclear power plants and along the main wind directions (NE and NNE). The activity values were found to decrease with increasing distance from the reactors. The unexpectedly high (14)C excess values found in two samples were related to the local topography, which favors (14)C accumulation and limits the dispersion of the plume. The results indicate a clear (14)C anthropogenic signal within 5 km around the nuclear power plants which is most prominent along northeastwards, the prevailing wind direction.     

Gravimetric and Chemical Features of Airborne PM10 AND PM2.5 in Mainland Portugal

This paper describes concentration amounts of arsenic (As), particulate mercury (Hg), nickel (Ni) and lead (Pb) in PM₁₀ and PM_2.5, collected since 1993 by the Technological and Nuclear Institute (ITN) at different locations in mainland Portugal, featuring urban, industrial and rural environments, and a control as well. Most results were obtained in the vicinity of coal- and oil-fired power plants. Airborne mass concentrations were determined by gravimetry. As and Hg concentrations were obtained through instrumental neutron activation analysis (INAA), and Ni and Pb concentrations through proton-induced X-ray emission (PIXE). Comparison with the EU (European Union) and the US EPA (United States Environmental Protection Agency) directives for Ambient Air has been carried out, even though the sampling protocols herein – set within the framework of ITN's R&D projects and/or monitoring contracts – were not consistent with the former regulations. Taking this into account, 1) the EU daily limit for PM₁₀ was exceeded a few times in all sites except the control, even if the number of times was still inferior to the allowed one; 2) the EU annual mean for PM₁₀ was exceeded at one site; 3) the EPA daily limit for PM_2.5 was exceeded one time at three sites; 4) the EPA annual mean for PM_2.5 was exceeded at most sites; 5) the inner-Lisboa site approached or exceeded the legislated PMs; 6) Pb levels stayed far below the EU limit value; and 7) concentrations of As, Ni and Hg were also far less than the reference values adopted by EU. In every location, Ni appeared more concentrated in PM_2.5 than in coarser particles, and its levels were not that different from site to site, excluding the control. The highest As and Hg concentrations were found in the neighbourhood of the coal-fired, utility power plants. The results may be viewed as a “worst-case scenario” of atmospheric pollution, since they have been obtained in busy urban-industrial areas and/or near major power-generation and waste-incineration facilities.     

MODELING URBAN NONPOINT SOURCE POLLUTION WITH A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: A geographic information system (GIS) was a useful aid in the assessment of urban nonpoint source pollution and the development of a pollution control strategy. The GIS was used for data integration and display, and to provide data for a nonpoint source model. An empirical nonpoint source loading model driven by land use was used to estimate pollutant loadings of priority pollutants. Pollutant loadings were estimated at fine spatial resolution and aggregated to storm sewer drainage basins (sewersheds). Eleven sewersheds were generated from digital versions of sewer maps. The pollutant loadings of individual land use polygons, derived as the units of analysis from street blocks, were aggregated to get total pollutant loadings within each sewershed. Based on the model output, a critical sewershed was located. Pollutant loadings at major sewer junctions within the critical sewershed were estimated to develop a mitigation strategy. Two approaches based on the installation of wet ponds were investigated - a regional approach using one large wet pond at the major sewer outfall and a multisite approach using a number of smaller sites for each major sewer junction. Cost analyses showed that the regional approach would be more cost effective, though it would provide less pollution control.     

Characterization of urban solid waste in Chihuahua, Mexico

The characterization of urban solid waste generation is fundamental for adequate decision making in the management strategy of urban solid waste in a city. The objective of this study is to characterize the waste generated in the households of Chihuahua city, and to compare the results obtained in areas of the city with three different socioeconomic levels. In order to identify the different socioeconomic trends in waste generation and characterization, 560 samples of solid waste were collected during 1 week from 80 households in Chihuahua and were hand sorted and classified into 15 weighted fractions. The average waste generation in Chihuahua calculated in this study was 0.676 kg per capita per day in April 2006. The main fractions were: organic (48%), paper (16%) and plastic (12%). Results show an increased waste generation associated with the socioeconomic level. The characterization in amount and composition of urban waste is the first step needed for the successful implementation of an integral waste management system.     

C, δC and total C content in soils around a Brazilian PWR nuclear power plant

Nuclear power plants release ¹⁴C during routine operation mainly as airborne gaseous effluents. Because of the long half-life (5730 years) and biological importance of this radionuclide (it is incorporated in plant tissue by photosynthesis), several countries have monitoring programs in order to quantify and control these emissions. This paper compares the activity of ¹⁴C in soils taken within 1 km from a Brazilian nuclear power plant with soils taken within a reference area located 50 km away from the reactor site. Analyses of total carbon, δ¹³C and ¹³⁷Cs were also performed in order to understand the local soil dynamics. Except for one of the profiles, the isotopic composition of soil organic carbon reflected the actual forest vegetation present in both areas. The ¹³⁷Cs data show that the soils from the base of hills are probably allocthonous.     

Volatile organic compounds in air at urban and industrial areas in the Tarragona region by thermal desorption and gas chromatography–mass spectrometry

Annual trends of a group of 66 volatile organic compounds (VOCs), containing 20 ozone precursors, were the aim of a sampling campaign carried out for a year in air at urban and industrial areas from Tarragona region. VOCs were determined by active collection on multisorbent tubes, followed by thermal desorption and gas chromatography–mass spectrometry. The analytical method was developed and validated, showing good levels of detection and quantification, recoveries, precision, and linearity for all the compounds in the range being studied. All the industrial and urban samples taken during the sampling campaign were similar in their qualitative composition. The most abundant compound in all urban and industrial sites was i-pentane, with concentrations between 15.2 and 202.1 μg m^???3 in urban sites and between 1.3 and 98.6 μg m^???3 in industrial sites. In urban sites, the following compounds in order of abundance were toluene, n-pentane, m,p-xylene, and o-xylene, with maximum levels of 150.6, 45.8, 42.3, and 31.7 μg m^???3, respectively. In industrial sites, the most abundant compounds depended on the sampled site.