Characterization of saccharides and other organic compounds in fine particles and the use of saccharides to track primary biologically derived carbon sources

A total of 134 aerosol samples (d_p < 2.5 μm) were collected at one rural site and one urban site in Texas from November 2005 to July 2006 to investigate the different sources that contribute to the ambient levels of different compounds. In particular, saccharide compounds were studied as potential tracers to track aerosols of biologically derived origin. The ambient concentration, seasonal variation, and urban/rural comparison of major saccharides and other organic compounds including normal alkanes, hopanes, and carboxylic acids were determined and analyzed relative to characterizing sources of PM2.5. Saccharides, together with other known molecular markers, were analyzed by a positive matrix factorization model and eight source factors were isolated that provide meaningful interpretation of aerosol sources. Three isolated factors were characterized by the dominance of different saccharide compounds and were attributed to wood smoke, sucrose rich bio-aerosols, and fungal spore derived bio-aerosols. It was estimated that wood smoke and primary biologically derived carbon sources contributed 22% and 14% to the measured ambient PM2.5 mass at San Augustine and 16% and 5% to the measured ambient PM2.5 mass at Dallas. The relative PM contribution from other resolved sources were also calculated.     

The use of digital photos to assess visual cover for wildlife in rangelands

Grassland vegetation can provide visual cover for terrestrial vertebrates. The most commonly used method to assess visual cover is the Robel pole. We test the use of digital photography as a more accurate and repeatable method. We assessed the digital photography method on four forage grassland species (Pseudoroegneria spicata, Festuca campestris, Poa pratensis, Achnatherum richardsonii). Digital photos of 2-dimensional cutout silhouettes of three bird species sharp-tailed grouse, western meadowlark and savannah sparrow were used to model the impact of clipping (i.e., grazing) on visual cover. In addition, photos of artificial voles were used to model litter on cover available to small mammals. Nine sites were sampled and data were analyzed by the dominant grass species in each study plot. Regression analysis showed that digital photos (r² = 0.62) were a better predictor than the Robel pole (r² = 0.26) for assessment of cover. Clipping heights showed that clipping at less than 15 cm left the silhouettes 50% exposed. Digital photo analysis revealed that visual cover was affected by the type of grass species, with F. campestris > P. pratensis > A. richardsonii > P. spicata. Biomass and litter were both positively related to cover for small mammals.     

Fish and seafood availability in markets in the Baie des Chaleurs region, New Brunswick, Canada: a heavy metal contamination baseline study

The consumption of halieutic products has many health benefits. However, their contaminants loads need to be addressed to better understand the risk from consuming these products. The aquatic biota from the Baie des Chaleurs in New Brunswick is contaminated by cadmium, zinc and lead. In spite of this, no study has examined the heavy metal concentrations in commercial halieutic products sold in this Canadian region. The objective of this pilot study was to characterize the species and origin of fish and seafood sold in the Baie des Chaleurs region by using an ecosystemic approach. Additionally, a baseline picture of the heavy metal levels found in these products has been determined. In 2008, interviews were carried out in markets located in the Baie des Chaleurs area. Species that were identified as the most purchased were then bought for analysis. Samples were freeze-dried and homogenized before nitric acid digestions. Aluminum, copper, cadmium, iron, manganese, and zinc concentrations were determined by inductively coupled plasma optical emission spectrometry. Results show that 36 % of seafood species sold in markets were caught in the Baie des Chaleurs. Lobsters, shrimps, scallops and oysters are the most purchased species regardless of the season. High amounts of cadmium exceeding tolerable daily intake are found in lobster hepatopancreas and can cause deleterious effects on health, in particular in vulnerable populations such as children and heavy consumers. The ecosystemic approach to health used in this pilot study shows the feasibility of an exhaustive study on the exposure of coastal population to heavy metal from fish and seafood consumption and the source of halieutic products sold in markets.     

Ciliary Activity and Pulmonary Retention of Inhaled Dust In Rats Exposed to Sulfur Dioxide

While the ciliary activity in the airways of rats exposed to sulfur dioxide at low concentration has been studied repeatedly, the effects of chronic exposure to realistic levels of sulfur dioxide and particulates has not been determined. This paper describes the response of white albino rats to the inhalation of low concentrations of sulfur dioxide while exposed to relatively high concentrations of an inert dust. Test results indicate that no change is found in the ciliary activity or the relative number of dust cells in the alveolar structure of rats exposed to 1 ppm of sulfur dioxide and 1 mg/m³ of a graphite dust.     

Continuous Emissions Monitoring Using Spark-Induced Breakdown Spectroscopy

ABSTRACT

A new technology for monitoring airborne heavy metals on aerosols and particulates based on spark-induced breakdown spectroscopy (SIBS) was evaluated at a joint U.S. Environmental Protection Agency (EPA)/U.S. Department of Energy test at the rotary kiln incinerator simulator (RKIS) facility at EPA/Research Triangle Park, NC, in September 1997. The instrument was configured to measure lead and chromium in a simulated combustion flue gas in real time and in situ at target levels of 15 and 75 u, g/dry standard cubic meters. Actual metal concentrations were measured during the tests using EPA Reference Method (RM) 29.

The SIBS technology detected both lead and chromium at the low- and high-level concentrations. Additionally, the hardware performed without failure for more than 100 hr of operation and acquired data for 100% of the RM tests. The chromium data were well correlated with concentration increases resulting from duct operations and pressure fluctuations that are known to entrain dust.     

Chemical speciation of PM2.5 and PM10 in south Phoenix, AZ, USA

Phoenix, AZ, experiences high particulate matter (PM) episodes, especially in the wintertime. The spatial variation of the PM concentrations and resulting differences in exposure is of particular concern. In this study, PM2.s (PM with aerodynamic diameter <2.5 microm) and PM10 (PM with aerodynamic diameter <10 microm) samples were collected simultaneously from the east and west sides of South Phoenix and at a control site in Tempe and analyzed for trace elements and bulk elemental and organic carbon. Measurements showed that although PM2.5 concentrations had similar trends in temporal scale across all sites, concentrations of PM10 did not. The difference in PM10 concentrations and fluctuation across the three sites suggest effects of a local soil source as evidenced by high concentrations of Al, Ca, and Fe in PM10. K and anthropogenic elements (e.g., Cu, Pb, and Zn) in PM2.5 samples on January 1 were strikingly high, suggesting the influence of New Year's fireworks. Concentrations of toxic elements (e.g., Pb) in the study presented here are not different from similar studies in other U.S. cities. Application of principal component analysis indicated two broad categories of emission sources--soil and combustion--together accounting for 80 and 90% of variance, respectively, in PM2.5 and PM10. The soil and combustion components explained approximately 60 and 30% of the variance in PM10, respectively, whereas combustion sources dominated PM2.5 (>50% variance). Many elements associated with anthropogenic sources were highly enriched, with enrichment factors in PM2.5 an order of magnitude higher than in PM10 relative to surface soil composition in the study area.     

Navigating Institutional Challenges: Design to Enable Community Participation in Social Learning for Freshwater Planning

Social learning is a process suited to developing understanding and concerted action to tackle complex resource dilemmas, such as freshwater management. Research has begun to recognise that in practice social learning encounters a variety of institutional challenges from the shared habits and routines of stakeholders (organised by rules, norms and strategies) that are embedded in organisational structures and norms of professional behaviour. These institutional habits and routines influence the degree of willingness to engage with stakeholders, and expectations of behaviours in social learning processes. Considering this, there has been a call to understand how institutions influence social learning and emergent outcomes. We addresses this by presenting a heuristic for implementing social learning cognisant of institutional context to answer three questions: (i) How institutional influences impact implementation of social learning design; (ii) how implementation of social learning design modifies institutions influencing social learning; and (iii) how these changes in design and institutions together shape social learning outcomes? To answer these questions a freshwater planning exercise was designed, implemented and evaluated as a social learning process with community groups in two New Zealand catchments. Incorporating participatory reflection enabled the project team to modify social learning design to manage institutional influences hindering progress toward outcomes. Findings emphasise that social learning is underpinned by participants’ changing assumptions about what constitutes the institution of learning itself—from instruction to a dynamic, collective and emergent process. Reflecting on these assumptions also challenged participants’ expectations about their own and others’ behaviours and roles in freshwater planning.     

Rebound of a coal tar creosote plume following partial source zone treatment with permanganate

The long-term management of dissolved plumes originating from a coal tar creosote source is a technical challenge. For some sites stabilization of the source may be the best practical solution to decrease the contaminant mass loading to the plume and associated off-site migration. At the bench-scale, the deposition of manganese oxides, a permanganate reaction byproduct, has been shown to cause pore plugging and the formation of a manganese oxide layer adjacent to the non-aqueous phase liquid creosote which reduces post-treatment mass transfer and hence mass loading from the source. The objective of this study was to investigate the potential of partial permanganate treatment to reduce the ability of a coal tar creosote source zone to generate a multi-component plume at the pilot-scale over both the short-term (weeks to months) and the long-term (years) at a site where there is >10 years of comprehensive synoptic plume baseline data available. A series of preliminary bench-scale experiments were conducted to support this pilot-scale investigation. The results from the bench-scale experiments indicated that if sufficient mass removal of the reactive compounds is achieved then the effective solubility, aqueous concentration and rate of mass removal of the more abundant non-reactive coal tar creosote compounds such as biphenyl and dibenzofuran can be increased. Manganese oxide formation and deposition caused an order-of-magnitude decrease in hydraulic conductivity. Approximately 125 kg of permanganate were delivered into the pilot-scale source zone over 35 days, and based on mass balance estimates <10% of the initial reactive coal tar creosote mass in the source zone was oxidized. Mass discharge estimated at a down-gradient fence line indicated >35% reduction for all monitored compounds except for biphenyl, dibenzofuran and fluoranthene 150 days after treatment, which is consistent with the bench-scale experimental results. Pre- and post-treatment soil core data indicated a highly variable and random spatial distribution of mass within the source zone and provided no insight into the mass removed of any of the monitored species. The down-gradient plume was monitored approximately 1, 2 and 4 years following treatment. The data collected at 1 and 2 years post-treatment showed a decrease in mass discharge (10 to 60%) and/or total plume mass (0 to 55%); however, by 4 years post-treatment there was a rebound in both mass discharge and total plume mass for all monitored compounds to pre-treatment values or higher. The variability of the data collected was too large to resolve subtle changes in plume morphology, particularly near the source zone, that would provide insight into the impact of the formation and deposition of manganese oxides that occurred during treatment on mass transfer and/or flow by-passing. Overall, the results from this pilot-scale investigation indicate that there was a significant but short-term (months) reduction of mass emanating from the source zone as a result of permanganate treatment but there was no long-term (years) impact on the ability of this coal tar creosote source zone to generate a multi-component plume.     

ETEX: A European tracer experiment; observations, dispersion modelling and emergency response

In Autumn, 1994, two releases of perfluorocarbon tracers from north-east France were tracked across northern Europe using a network of 168 ground stations with limited airborne sampling support. Simulating an emergency response situation, modellers from 20 countries reported their long-range dispersion predictions, initially within a few hours of the release and then over the coming days in line with the evolving meteorological data. Subsequent comparison of the predictions with the environmental results showed model performance varying from good, for the conditions of the first release in the majority of cases, to unsatisfactory for the second release in all cases. The experimental database now established represents a unique tool for investigating the effectiveness of future model developments. The papers in this special issue reflect the major scientific results