三峡库区支流回水区水体分层与藻类生长

三峡水库自2003年蓄水以来,库区支流形成了长短不一的回水河段,缓慢的水流和蓄积的营养盐导致回水河段由库区蓄水之初在短时间内出现水华,逐步发展到一年内水华可维持数月。为了研究回水区水环境与水华发生的关系,从2013年4月—12月,对库区北岸最大支流澎溪河的长年回水区——高阳平湖进行了定点监测。监测结果显示,季节性变化及三峡库区特殊的调度方式,导致高阳平湖水体在春、夏和秋季有明显分层。春季水华期间藻类群落结构单一,只出现4门9属,以蓝藻门的微囊藻(Microcystis)、绿藻门的实球藻(Pandorina)和空球藻(Eudorina)为主,秋季藻类结构组成增至7门52属,优势属逐渐被硅藻门的小环藻(Cyclotella)和针杆藻(Synedra)取代,水体各层藻类细胞密度差异消失。研究结果说明高阳平湖水体分层状况影响藻类生长和分布。     

Mg2+对克雷伯氏菌NIII2及其诱变菌产絮凝剂特性的影响

研究了Mg2+对克雷伯氏菌NIII2及其诱变株NIII2-1、NIII2-2发酵产絮凝剂特性的影响作用。实验表明,发酵液未外加或投加较少量Mg2+时,3菌株均不分泌黄色物质,且易产酸,致使絮凝剂产量低,小于1.5 g/L。发酵液中加入Mg2+的浓度在0.5~0.7 mmol/L范围,絮凝剂产生时,伴随黄色分泌物出现,发酵液p H稳定在7.5左右,同时絮凝剂产量大大提高,可达9.7 g/L。未投加Mg2+,3菌株所产絮凝剂Zeta电位负值较大,分别为-59.2、-56.6、-52.1 m V,且蛋白质与糖含量比值小于0.5,絮凝活性低;而投加Mg2+所产絮凝剂Zeta电位值可升至-48.0 m V,3菌株所产絮凝剂中蛋白和糖含量比值分别可提高到1.87、3.29、2.03,对高岭土所产生的SS去除率均大于93%。未投加Mg2+时,诱变株NIII2-1、NIII2-2所产絮凝剂含有相当多的O-链接和N-链接的结构,而其他情况下所产絮凝剂则主要是O-链接结构。     

废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

Soil microbial systems respond differentially to tetracycline,sulfamonomethoxine, and ciprofloxacin entering soil under pot experimental conditions alone and in combination

This study investigated soil microbial responses to the application of tetracycline (TC), sulfamonomethoxine (SMM), and ciprofloxacin (CIP) alone and in combination in a soil culture pot experiment conducted at Hangzhou, China. Multiple approaches were applied for a better and complete depiction. Among the three antibiotics, SMM has a lowest dissipation and shows a most dramatic inhibition on microbial community and metabolism diversity. The combined application (AM) of SMM, CIP, and TC improved the dissipation of each antibiotic; similarly, SMM- and CIP-resistant bacteria showed larger populations in the AM than all single applications. Soils accumulated a large content of NO₃–N at day 20 after multi-antibiotics perturbation. All antibiotics stimulated soil basal respirations and inhibited soil metabolism diversity, whereas the interruption exerted by SMM and AM lasted for a longer time. Six nitrogen-cycling genes including chiA, amoA, nifH, nirK, nirS, and narG were quantified and found to decrease owing to both single- and multi-antibiotics perturbation. Overall, AM was most interruptive for soils, followed by SMM perturbation, while other antibiotics could be less interruptive. These results provide systematic insights into how soil microbial systems would shift under each single- or multi-antibiotics perturbation.     

Haze is a risk factor contributing to the rapid spread of respiratory syncytial virus in children

This study investigated whether respiratory syncytial virus (RSV) infection in children was associated with ambient temperature and air pollutants in Hangzhou, China. A distributed lag non-linear model (DLNM) was used to estimate the effects of daily meteorological data and air pollutants on the incidence of RSV infection among children. A total of 3650 childhood RSV infection cases were included in the study. The highest air pollutant concentrations were in January to May and October to December during the year. The yearly RSV-positive rate was 10.0 % among children with an average age of 4.3 months. The highest RSV-positive rate occurred among patients 0 to 3 months old. Children under 6.5 months old accounted for 80 % of the total patients infected by RSV. A negative correlation was found between ambient temperature and RSV infection, and it was strongest with minimum ambient temperature (r = ?0.804, P < 0.001). There was a positive correlation between the infection rate and the particulate matter (PM) 2.5 (r = 0.446, P < 0.001), PM10 (r = 0.397, P < 0.001), SO₂ (r = 0.389, P < 0.001), NO₂ (r = 0.365, P < 0.001) and CO (r = 0.532, P < 0.001). The current study suggested that temperature was an important factor associated with RSV infection among children in Hangzhou. Air pollutants significantly increased the risk of RSV infection with dosage, lag and cumulative effects.     

Construction and functional analysis of Trichoderma harzianum mutants that modulate maize resistance to the pathogen Curvularia lunata

Agrobacterium tumefaciens-mediated transformation (ATMT) was used to generate an insertional mutant library of the mycelial fungus Trichoderma harzianum. From a total of 450 mutants, six mutants that showed significant influence on maize resistance to C. lunata were analyzed in detail. Maize coated with these mutants was more susceptible to C. lunata compared with those coated with a wild-type (WT) strain. Similar to other fungal ATMT libraries, all six mutants were single copy integrations, which occurred preferentially in noncoding regions (except two mutants) and were frequently accompanied by the loss of border sequences. Two mutants (T66 and T312) that were linked to resistance were characterized further. Maize seeds coated with T66 and T312 were more susceptible to C. lunata than those treated with WT. Moreover, the mutants affected the resistance of maize to C. lunata by enhancing jasmonate-responsive gene expression. T66 and T312 induced maize resistance to C. lunata infection through a jasmonic acid-dependent pathway.     

Selective separation of deltamethrin by molecularly imprinted polymers using a β-cyclodextrin derivative as the functional monomer

A deltamethrin-imprinted polymer (MIP₁) was prepared using bis(-6-O-butanediacid monoester)-β-cyclodextrin (BBA-β-CD) as the functional monomer and toluene 2,4-diisocyanate (TDI) as the cross-linker. In comparison to the molecularly imprinted polymer where β-CD was applied as the functional monomer (MIP₂), MIP₁ showed a higher specific binding capacity (ΔC_P) and an improved imprinting factor (IF) for deltamethrin. The selective recognition experiments demonstrated that compared to MIP₂, MIP₁ could better recognize its template over other substrates that had similar chemical structures. The solid phase extraction (SPE) of deltamethrin using MIP₁ as the adsorbent was further investigated. The recoveries of the molecularly imprinted solid phase extraction (MISPE) column for deltamethrin were 83.2–93.4% with relative standard deviations (RSD) of 2.03–6.19%. The method has been successfully applied to the enrichment of trace deltamethrin from real water samples.     

生物质材料预处理餐饮废水

采用4种廉价的生物质材料（水葫芦、柚子皮、木屑、核桃壳）用于餐饮废水的预处理。通过静态烧杯实验,研究了各生物质材料预处理废水的效果及最佳处理条件。结果表明,生物质材料对废水中COD的去除率均在45％以上,油脂吸附量为4～16mg／g,最优吸附材料为水葫芦,COD去除率达65％,油脂吸附量为16mg／g;水葫芦和柚子皮的最佳处理条件为：粒径〈0．2mm,投加量为20g／L,废水pH为4,处理时间为2h,温度为20℃;木屑和核桃壳的最佳实验条件为：粒径〈0．2mm,投加量为28g／L,pH为2,处理时间为2．5h,温度为20℃。生物质对餐饮废水的预处理,为废水中大量有机物和废弃油脂的去除提供了新思路和途径。     

Modeling Traffic-Related Air Pollution in Street Canyons of Beijing

ABSTRACT

It is important to develop a general model to accurately simulate the air pollution in urban street areas. In this paper, the Operational Street Pollution Model (OSPM) initially developed in Denmark is tested with measured data from a relatively wide and open street in Beijing. Major factors influencing the dispersion, such as emission factors, stationary source emissions, and solar radiation, are analyzed. Results show that the model can reflect the basic dispersion pattern in the street but gives systematically higher concentrations. After modifications to estimate street-level wind speed in the model, performance is obviously improved.     

几种有机废气吸收液对甲苯吸收效果的对比

采用自行设计的吸收装置,对比研究了国内外文献报道的几种有机废气吸收液(二乙基羟胺、聚乙二醇400、硅油、食用油、废机油、0#柴油)对模拟甲苯废气的吸收效果。结果表明,通过改变吸收液种类、废气中甲苯浓度等条件能够对甲苯废气吸收效果产生显著影响。随着吸收时间的延长,吸收液对甲苯的吸收率逐渐降低,直至达到动态饱和。随甲苯废气中甲苯浓度的增大,吸收液的有效吸收量减小,而饱和吸收量则增大。在相同实验条件下,二乙基羟胺对甲苯的有效吸收量与饱和吸收量均最大,其次是食用油、机油、0#柴油,而聚乙二醇与硅油吸收效果最差。本研究结果为合理选择甲苯废气的高效吸收液提供了理论依据。