Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

Effect of barium sulfate modification on the SO2 tolerance of V2O5 /TiO2 catalyst for NH3-SCR reaction

Sulfur poisoning of V_2O_5/BaSO_4–TiO_2(VBT),V_2O_5/WO_3–TiO_2(VWT) and V_2O_5/BaSO_4–WO_3–TiO_2(VBWT) catalysts was performed in wet air at 350℃ for 3 hr,and activities for the selective catalytic reduction of NO_x with NH_3 were evaluated for 200–500℃.The VBT catalyst showed higher NO_x conversions after sulfur poisoning than the other two catalysts.The introduction of barium sulfate contributed to strong acid sites for the as-received catalyst,and eliminated the redox cycle of active vanadium oxide to some extent,which resulted in a certain loss of activity.Readily decomposable sulfate species formed on VBT-S instead of inactive sulfates on VWT-S.These decomposable sulfates increased the number of strong acid sites significantly.Some sulfate species escaped during catalyst preparation and barium sulfate was reproduced during sulfur poisoning,which protects vanadia from sulfur oxide attachment to a great extent.Consequently,the VBT catalyst exhibited the best resistance to sulfur poisoning.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

烟草废弃物快速堆肥过程中重金属Cd形态变化特征

以烟草废弃物为原料,活性土壤为载体建立堆体,研究重金属镉的形态变化,及堆肥过程中的动态变化规律。结果表明,烟草废弃物与活性土壤混合能快速腐熟。堆肥总质量下降,重金属镉含量相对增加。重金属镉的铁锰氧化态比例增加19%,有机结合态比例在堆肥升温阶段增加,腐熟后有所下降。残渣态比例大幅度上升,增加达到5倍,且在腐熟阶段增幅最大。说明堆肥处理有利于降低重金属镉的活性。     

进口危险化学品风险评估管理模式研究

剖析了国外化学品风险管理理念,梳理了我国进口危险化学品质量安全状况,对进口危险化学品的风险因素进行评估,并探索建立以风险信息数据库、安全标识备案审核制度、差异化管理等模块组成的管理模式,为推动我国进口危险化学品检验检疫模式改革提供参考。     

基于GIS和LUR模型的西安市PM2.5浓度空间分布模拟研究

基于地理信息系统GIS和土地利用回归LUR模型,模拟西安市PM2.5浓度空间动态分布,结果表明:与PM2.5浓度相关性最高的分别为缓冲区为2 km的水域面积、人口密度和距离水域距离,R 2分别为0.501,0.393和0.280;与PM2.5浓度相关性最低的分别为缓冲区为4 km的水域面积、未利用地面积和耕地面积,R 2分别为0.039、0.021和0.017.未考虑风速建立的LUR模型多元回归的相关系数为0.856,R 2为0.733,考虑风速的相关系数为0.892,R 2为0.796,表明风速对于污染物的分布影响较大,LUR模型模拟效果较好.模拟的PM2.5年均浓度高风险区分布于中部,中风险区分布于中西部,低风险区分布于东南部和西部.     

乙二醇装置催化剂延期运行及安全控制措施

对乙二醇装置SD400-9催化剂延期运行进行了必要性和可行性分析,提出了延期运行要采取的有效控制措施,确保了装置的安全稳定运行,取得了可观的效益,同时减少了危废品的产生,减少了资源浪费和环境污染。     

炼化企业VOCs排放现状及治理对策

简要介绍了挥发性有机物(VOCs)的定义及危害,分析了炼化企业的VOCs排放现状,并简要介绍了VOCs有组织和无组织排放的种类。介绍了中国石化济南分公司延迟焦化装置和柴油加氢装置针对有组织排放和无组织排放开展的各种治理措施及LDAR检测开展情况。     

双层内衬改造技术在埋地油罐中的应用研究

介绍了共结构双层内衬改造技术,其结构共由5层组成,分别为基础层(防腐层和加强密封层组成)、中空监测层、内衬加强层、防油防腐层和导静电层;采用该技术可对加油站埋地单层钢制油罐进行双层改造,经过罐内清洗、喷砂除锈、基础层施工、中空监测层施工、内衬加强层施工、防油防腐层施工、导静电层施工和整个系统气密性的保压检测,完成双层内衬油罐的现场改造;采用GB30040规定的Ⅰ级真空泄漏监测方法,可以在油品泄漏前报警,实现埋地油罐整体安全水平的提升,具有重要的现实意义。