飞灰对废弃物焚烧过程中二恶英的抑制和捕获作用研究

通过工程试验和分析测试,分别对城市生活垃圾和医疗废弃物焚烧过程中高温烟气段和低温烟气段飞灰对二恶英的抑制和捕获作用进行了初步的研究。研究表明:适当增加锅炉灰循环量对于二恶英的再合成能起到抑制作用,飞灰中金属氧化物介质可能存在着催化和阻止的双重竞争机制;添加飞灰对于吸附医疗废物焚烧尾气中的二恶英所起作用不明显,但飞灰对燃烧残炭的吸附作用非常明显。     

泥龄对A~2O工艺去除多环麝香的影响

研究了A2O工艺不同污泥龄(Sludge retention time,SRT)条件下中佳乐麝香(Galaxolide,HHCB)与吐纳麝香(Tonalide,AHTN)的去除和迁移的变化情况。采用固相萃取与气相质谱联用的方法对各池中水相与泥相中HHCB和AHTN的浓度进行分析。结果发现:A2O工艺对HHCB的去除效果好于AHTN。高SRT条件(15,20 d)下HHCB、AHTN的总去除率明显小于低SRT条件(5,10 d)下的总去除率。     

湿法烟气脱硫技术研究进展

SO2的污染影响了环境生态及人类的生活,已经引起了世界各国的广泛关注。介绍了国内外湿法烟气脱硫技术的工艺研究现状,讨论了相关技术存在的问题,并总结了湿法烟气脱硫技术的新进展和发展趋势,为该方法的进一步研究及工业化应用提供了参考。     

地质雷达在监测地下水石油烃污染中的应用

随着我国工业迅速发展,石油烃污染威胁地下水安全问题逐渐暴露出来。地质雷达作为一种非破坏性的原位探测技术在国外已广泛应用于地下水监测,由于石油烃在地质雷达图谱上通常显示出高阻异常特征,这为探测地下水中的石油烃污染提供了可能。简述了地质雷达探测石油烃的原理,探测效果的影响因素,并列举了部分国外实例,证实了地质雷达探测地下水石油烃污染的可行性。     

Competitive sorption between 17α-ethinyl estradiol and bisphenol A/4-n-nonylphenol by soils

The sorption of 17α-ethinyl estradiol(EE2),bisphenol A(BPA),and 4-n-nonylphenol(NP) in single systems and the sorption of EE2 with different initial aqueous concentrations of BPA or NP were examined using three soils.Results showed that all sorption isotherms were nonlinear and fit the Freundlich model.The degree of nonlinearity was in the order BPA(0.537-0.686) > EE2(0.705-0.858) > NP(0.875-0.0.951) in single systems.The isotherm linearity index of EE2 sorption calculated by the Freundlich model for Loam,Silt Loam and Silt increased from 0.758,0.705 and 0.858,to 0.889,0.910 and 0.969,respectively,when BPA concentration increased from 0 to 1000 μg/L,but the effect of NP was comparably minimal.Additionally,EE2 significantly suppressed the sorption of BPA,but insignificantly suppressed that of NP.These findings can be attributed to the difference of sorption affinity of EE2,NP and BPA on the hard carbon(e.g.,black carbon) of soil organic matter that dominated the sorption in the low equilibrium aqueous concentration range of endocrine-disrupting chemicals(EDCs).Competitive sorption among EDCs presents new challenges for predicting the transport and fate of EDCs under the influence of co-solutes.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.