Pollution distribution of heavy metals in surface soil at an informal electronic-waste recycling site

We studied distribution of heavy metals [lead (Pb), copper (Cu) and zinc (Zn)] in surface soil at an electronic-waste (e-waste) recycling workshop near Metro Manila in the Philippines to evaluate the pollution size (spot size, small area or the entire workshop), as well as to assess heavy metal transport into the surrounding soil environment. On-site length-of-stride-scale (~70 cm) measurements were performed at each surface soil point using field-portable X-ray fluorescence (FP-XRF). The surface soil at the e-waste recycling workshop was polluted with Cu, Zn and Pb, which were distributed discretely in surface soil. The site was divided into five areas based on the distance from an entrance gate (y-axis) of the e-waste recycling workshop. The three heavy metals showed similar concentration gradients in the y-axis direction. Zn, Pb and Cu concentrations were estimated to decrease to half of their maximum concentrations at ~3, 7 and 7 m from the pollution spot, respectively, inside the informal e-waste recycling workshop. Distance from an entrance may play an important role in heavy metal transport at the soil surface. Using on-site FP-XRF, we evaluated the metal ratio to characterise pollution features of the solid surface. Variability analysis of heavy metals revealed vanishing surficial autocorrelation over metre ranges. Also, the possibility of concentration prediction at unmeasured points using geostatistical kriging was evaluated, and heavy metals had a relative “small” pollution scales and remained inside the original workshop compared with toxic organohalogen compounds. Thus, exposure to heavy metals may directly influence the health of e-waste workers at the original site rather than the surrounding habitat and environmental media.     

Thelytokous parthenogenesis by queens in the dacetine ant Pyramica membranifera (Hymenoptera: Formicidae)

Thelytokous parthenogenesis in which diploid females are produced from unfertilized eggs, was recently reported for some ant species. Here, we document thelytokous reproduction by queens in the polygynous species Pyramica membranifera. Queens that emerged in the laboratory were kept with or without workers under laboratory conditions. Independent colony founding was successful for a few queens if prey was provided. All artificial colonies, which started with a newly emerged queen and workers produced new workers and some of the colonies also produced female sexuals. Some of the female sexuals shed their wings in the laboratory and started formation of new polygynous colonies. Workers had no ovaries and thus, were obligatorily sterile.     

Transportation of organic matter to the sea floor by carrion falls of the giant jellyfish <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the Sea of Japan

The fate of the giant jellyfish Nemopilema nomurai after death was examined in the southwest Sea of Japan. The density of dead jellyfish was greater than that of live animals. The dead animals are heavier than the Japan Sea Proper Water which occurs deeper than 200 m, suggesting that dead jellyfish sink to the sea floor. The sea floor survey, conducted with a towed video tape recorder (VTR) monitoring system between mid September and mid October, observed a total of 138 jellyfish during 28 of 29 operations. The density of carrion ranged between 0.2 and 5.1 individuals/1,000 m² (mean ± SE = 1.1 ± 0.2). Ophiuroids occurred abundantly at 23 jellyfish carcasses and a sea anemone was observed attached to five carcasses. The VTR surveys confirmed that carrion sinks to the sea floor not only during the winter, the normal end of life for medusae, but also during the fall. A trap survey baited with medusae was also employed, and four different species were sampled with the traps: the snow crab (Chionoecetes opilio), a shrimp (Pandalopsis japonica), the ivory shell (Buccinum striatissimum) and an ophiuroid (Ophiura sarsii). Much of the trap bait remained (49–68% weight-mean = 60.3%) during the 23 h soak-time, and the reduction in weight was greater than that observed by bacterial decomposition, suggesting benthic animals consume dead organisms. The present study indicates that dead N. nomurai sink to the sea floor continuously and were subsequently consumed by benthic scavengers.     

Identification and characterization of coagulation inhibitor proteins derived from cyanobacterium Microcystis aeruginosa

The excess growth of cyanobacteria in semi enclosed water areas caused by eutrophication brings about coagulation inhibition in drinking water treatment processes. In this study, coagulation inhibitor proteins produced by Microcystis aeruginosa, a major cyanobacterium in algal bloom, were acquired by a phage display technique, an aluminum-immobilized affinity chromatography and a protein expression technique using Escherichia coli cells. Two cyanobacterial peptides with a high ratio of metallophilic amino acids were recovered, which were a part of homologues of a thiol oxidase enzyme Ero1p and a trans-acting repressor ArsR. It was also shown that the homologue of ArsR exhibited a stronger inhibitory effect on the coagulation of kaolin suspension with polyaluminum chloride than the control proteins. This is the first report to identify a cyanobacterial cell component to inhibit coagulation. The compositions of polar amino acids were critical to explain the strength of coagulation inhibition potential. Polar proteins from cyanobacteria could collectively consume coagulants or stabilize clay particles, which would be plausible explanations for causing coagulation inhibition. Meanwhile, results from the kaolin coagulation tests using the control proteins implied that the neutralization of positive charges of coagulant constituents by simple electrostatic interactions might not be the key mechanism on the protein-induced coagulation inhibition.     

Deposition velocity of PM2.5 sulfate in the summer above a deciduous forest in central Japan

In order to increase knowledge of aerosol dry deposition for the regional assessment of acid deposition and transboundary air pollution in East Asia, an experimental study on PM2.5 sulfate deposition was implemented in the early summer of 2009. The experimental field was located in a deciduous forest at the foot of Mt. Asama, central Japan. Aerosol fluxes were obtained using the aerodynamic gradient method. Three aerosol samplers were placed on an experimental tower at 21, 24 and 27 m above the ground surface, and collected PM2.5 on filters for chemical analysis. Vertical concentration differences between 21 m and 27 m of PM2.5 sulfate were detected significantly when the concentration exceeded 1 μg m^?3. Mean deposition velocity was estimated to be 0.9 ± 1.0 cm s^?1 in the daytime and 0.3 ± 0.3 cm s^?1 in the nighttime. In the case that a height-dependent correction in the roughness sub-layer was taken into account, the deposition velocities increased more, especially in daytime. Higher deposition velocities in the daytime were associated with larger friction velocities and unstable conditions. The deposition velocities observed in this study were in agreement with other experimental results found in the literature. On the other hand, they were higher than those calculated by theoretical models. Two empirical parameterizations (Wesely, M.L., Cook, D.R., Hart, R.L., 1985. Measurement and parameterization of particulate sulfur dry deposition over grass. Journal of Geophysical Research 90, 2131–2143; Ruijgrok, W., Tieben, H., Eisinga, P., 1997. The dry deposition of particles to a forest canopy: a comparison of model and experimental results. Atmospheric Environment 31, 399–415) were validated by the observations. The general trend of higher daytime and lower nighttime deposition velocities was similar among the observation and the two parameterizations. The large variability found in the measurement was not reproduced by the parameterizations, because it is attributable to random error from the differences between the samplers. The observations were in accordance with the parameterization of Ruijgrok et al. (1997) for a forest, although much larger than that of Wesely et al. (1985) for grasslands. This indicates the large difference in aerosol deposition velocities between forests and grasslands.     

mRNA expression of a cadmium-responsive gene is a sensitive biomarker of cadmium exposure in the soil collembolan Folsomia candida

The gene expression of environmental organisms is useful as a biomarker of environmental pollution. One of its advantages is high sensitivity. We identified the cDNA of a novel cadmium-responsive gene in the soil collembolan Folsomia candida. The deduced protein, designated “metallothionein-like motif containing protein” (MTC), was cysteine-rich and contained a metallothionein-like motif with similarity to metallothionein, but had a much longer sequence than metallothionein and contained repeated sequences of amino acids. Expression of MTC mRNA was sensitively induced by cadmium exposure at 0.3 mg/kg of dry food, a concentration at which toxic effects are not observed, but expression was not affected by γ-ray exposure (an inducer of oxidative stress). These findings suggest that MTC is involved in cadmium-binding processes rather than in oxidative-stress responses. In conclusion, we suggest that gene expression of MTC may be a candidate biomarker for detecting low levels of cadmium contamination in soil.     

Plastic waste management in Jakarta,Indonesia: evaluation of material flow and recycling scheme

Journal of Material Cycles and Waste Management - In Jakarta, Indonesia, municipalities collect plastic mixed with other waste, scavengers recover plastic waste by picking through waste, and some...     

Technical Procedures for CDM Project Design

The success of CDM depends on active participation of public and private entities. In particular, participation of wide range of private companies is an important factor for the success. In order to promote the participation of private companies in the CDM project activities as project participants, the authors clarify the steps and technical issues involved in the CDM project design procedures in a step-by-step approach. The steps consist of outlining the project plans, identifying project impacts, defining a project boundary, estimating GHG emissions reduction/enhancement of removals, documenting the results of estimation, and designing of monitoring plans. The authors also propose guidance for project participants, especially for those not familiar with the CDM, which provides plain explanation of major technical issues. In order to further develop a complete guideline, it is necessary to integrate the outputs of the ongoing international initiatives concerning technical issues of CDM into the stepwise approach proposed in this paper. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influences of air temperature change on leisure industries – case study on ski activities –

To evaluate the influences of air temperature change on ski activities, thechanges in the numbers of skiers visiting seven ski areas in Japan were predicted in conjunction with climate change. First, having built a model forpredicting snow depth based on the budgets of water and heat using the air temperature and precipitation data collected nationwide, we demonstrated goodagreement between the predicted and observed snow depths (p < 0.01 and the ratios for more than 81% cases ranged from 0.5 to 2). Second, the relationshipbetween the number of skiers and the depth of snow at one of the seven ski areaswas analyzed statistically on a daily basis. In addition, we did the same on amonthly basis at six other ski areas and compared the observed and predictednumbers of skiers (p < 0.01 and the ratios for more than 94% cases ranged from 0.5 to 2). Using this model and the relationship between daily snow depth andnumber of skiers, the changes in skier numbers in the seven ski areas werepredicted for several scenarios with respect to air temperature changes; e.g. a more than 30% drop in visiting skiers was forecast in almost all ski areas in Japan except northern region (Hokkaido) and/or high altitude regions (center of the Main Island) under the condition of a 3 ^°C increase in air temperature. The vulnerability of the ski industry and its adaptationto climate change are discussed.