Development of a novel hybrid microwave-heater reactor for paper-based waste treatment

It is necessary to develop a medical waste management system featuring nonburning treatment and safety functions for small medical institutions. In this article, the development of a waste management system without oxygen injection was achieved by means of hybrid heating using microwave energy and an electric heater. The shape of the microwave reactor was a rectangular parallelepiped with a volume of about 0.1 m³. In the experimental setup, microwave energy (2.45 GHz, about 800 W) was injected from the top of the reactor, while the heater (about 1 kW) was located at the bottom. Heat insulators were set into all the walls of the reactor. The gases generated in the system were vented through water and activated carbon. Five paper-based diapers with absorbed water were used as the waste sample. For the evaluation of performance, the reduction rate was defined as the ratio (in percent) of the weight before and after treatment. The reduction rate as a function of treatment time and the effect of the position of the waste in the reactor on the reduction rate and the uniformity of treatment were examined for about 3 kg of waste. It was found that the reduction rate reached as low as 4.2% at 3 h and then 3% after 8 h. The treated profile strongly depended on the position of the waste in the reactor. In particular, it was clarified that a metal cylindrical enclosure and a needle electrode played an important role in attaining uniform treatment of the waste.     

Emergy-based assessment on industrial symbiosis: a case of Shenyang Economic and Technological Development Zone

Industrial symbiosis is the sharing of services, utility, and by-product resources among industries. This is usually made in order to add value, reduce costs, and improve the environment, and therefore has been taken as an effective approach for developing an eco-industrial park, improving resource efficiency, and reducing pollutant emission. Most conventional evaluation approaches ignored the contribution of natural ecosystem to the development of industrial symbiosis and cannot reveal the interrelations between economic development and environmental protection, leading to a need of an innovative evaluation method. Under such a circumstance, we present an emergy analysis-based evaluation method by employing a case study at Shenyang Economic and Technological Development Zone (SETDZ). Specific emergy indicators on industrial symbiosis, including emergy savings and emdollar value of total emergy savings, were developed so that the holistic picture of industrial symbiosis can be presented. Research results show that nonrenewable inputs, imported resource inputs, and associated services could be saved by 89.3, 32.51, and 15.7 %, and the ratio of emergy savings to emergy of the total energy used would be about 25.58 %, and the ratio of the emdollar value of total emergy savings to the total gross regional product (GRP) of SETDZ would be 34.38 % through the implementation of industrial symbiosis. In general, research results indicate that industrial symbiosis could effectively reduce material and energy consumption and improve the overall eco-efficiency. Such a method can provide policy insights to industrial park managers so that they can raise appropriate strategies on developing eco-industrial parks. Useful strategies include identifying more potential industrial symbiosis opportunities, optimizing energy structure, increasing industrial efficiency, recovering local ecosystems, and improving public and industrial awareness of eco-industrial park policies.     

An overview of municipal solid waste management in China

Municipal solid waste management (MSWM) in China warrants particular attention as China has become the largest MSW generator in the world and the total amount of MSW it produces continues to increase. In recent years, central and local governments have made great efforts to improve MSWM in China. New regulations and policies have been issued, urban infrastructure has been improved, and commercialization and international cooperation have been encouraged. Considering these developments, an overview is necessary to analyze the current state as well as new opportunities and challenges regarding MSWM in China. This paper shows that since the late 1990s, the amount of MSW collected has been largely decoupled from economic growth and incineration has become an increasingly widespread treatment method for MSW. We identify and discuss four major challenges and barriers related to China’s MSWM, and propose an integrated management framework to improve the overall eco-efficiency of MSWM.     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

Observation and characterization of colloids derived from leached cement hydrates

The possibility of colloid generation from cement hydrates in a cementitious repository environment has been investigated through leaching experiments. Pulverized samples of High Flyash and Silica fume-content Cement (HFSC) and 1:9 ordinary portland cement/blast furnace slag (1:9 OPC/BFS) hydrate were leached in low-salinity groundwater at three solid-to-liquid (S/L) mass ratios (1:5, 1:50 and 1:100), and two temperatures (20 and 60 degrees C) for durations of nearly 2 and 8 months. Detailed characterization of colloid populations has been undertaken by TEM coupled with X-ray analysis. In addition, the surface charge and stability behavior of colloids have been investigated. The colloid concentrations in HFSC hydrate leachates generated at 20 and 60 degrees C show similar trends with S/L ratio. The colloid concentrations of leachates with the lower S/L ratio (1:50 and 1:100) are in the range of 10(11)-10(12) particles per liter. The majority of these particles are composed predominantly of Si, Ca, and Al; the mean particle size is less than 100 nm. The lowest colloid concentrations are found in the leachates with the highest S/L ratios, and the colloid populations tend to be dominated by larger particles. HFSC-derived colloid stability is due to a high negative zeta potential at alkaline pH values, combined with a calcium concentration that is below the critical coagulation concentration (CCC) for the colloids. A preliminary interpretation of HFSC-derived colloid stability based on classical DLVO theory provides a semi-quantitative explanation of the dependence of colloid populations on the S/L ratio in the leaching experiments.     

Estrogenic chemicals and estrogenic activity in leachate from municipal waste landfill determined by yeast two-hybrid assay

Estrogenic activity and estrogenic chemicals in landfill leachate were investigated by yeast two-hybrid assay and chemical analysis. Leachate sample extracted by liquid-liquid extraction with dichloromethane at pH 7.0 showed a higher dose-response curve than sample extracted at pH 3.0. or than sample extracted by solid phase extraction at either pH 7.0 or 3.0. The fraction extracted at pH 3.0 specifically inhibited not only growth of yeast but also estrogenic activity in this assay, suggesting that it contained anti-estrogenic chemicals. The greatest contributor to estrogenic activity among the chemicals identified in leachate extract was bisphenol A, with an estimated contribution ratio of 84%. The contribution ratios of 4-nonyl phenol (4-np) and 4-tert-octyl phenol (4-t-op) were estimated at 1.0%, and 0.1%, respectively, while natural estrogens such as 17beta-estradiol or estrone were below detection limit, so that their contribution ratio was estimated at no more than 10%. The estrogenic activity of leachate was decreased by aeration treatment alone after 7 days, and was no longer detected after 22 days. Concentrations of bisphenol A, 4-np and 4-t-op likewise decreased with aeration.     

The mild hydrothermal synthesis of hydrogrossular from coal ash

In this study, an attempt was made to synthesize hydrogrossular, a group of garnet minerals, under hydrothermal conditions at temperatures below 180°C, using coal ash, which is the solid waste from thermal power plants, as a starting material. A single phase corresponding to hydrogrossular was found at around 120°C, and the hydrogrossular coexisted with 11-Å tobermorite above 140°C. The hydrogrossular phase decreased with increasing reaction temperature, while that of 11-Å tobermorite increased concurrently. The physicochemical properties of the hydrogrossular obtained from the hydrothermal synthesis was characterized by X-ray diffraction thermogravimetry/differential thermal, analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray fluorescence spectroscopy. Received: September 4, 2000 / Accepted: March 7, 2001     

Implementing China's circular economy concept at the regional level: a review of progress in Dalian, China

The circular economy (CE) concept was introduced in China to address environmental degradation and resource scarcity associated with rapid economic development. Chosen as a demonstration city, Dalian has implemented the CE strategy as a means of conserving water, materials, energy and land. This paper outlines some of the regional CE initiatives that have been successful to date in Dalian, including those focusing on conserving energy and water resources and others focusing on reduced industrial emissions. The paper details the approach used in implementing the CE concept in Dalian, tracing the foci and goals of the program, and the sectoral approach used to implement a CE. Although Dalian municipality has achieved many successes in implementing a CE, our paper identifies several challenges that, until recently, have held back complete implementation. These include: the lack of incentives for older industries to 'green' their operations, the lack of financial support to expand the CE concept, and a broad-based need for heightened public awareness and participation in CE initiatives. Our paper then identifies several responses by Dalian municipality to overcome these challenges, including pricing and tax reforms that serve as conservation incentives, the provision of financial support for CE promotion through budget reorganization, and the organization of CE training programs. Our paper concludes that, although CE initiatives have been successful in Dalian, more is possible and more is needed before Dalian can be designated a true 'eco-city'. The approach used by Dalian can provide guidance for other Chinese cities, although it is recognized that each city must tailor its own approach for differing contexts and conditions.     

Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin

The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.     

Diurnal and Weekday Variations in the Source Contributions of Ozone Precursors in California’s South Coast Air Basin

Abstract

For at least 30 years, ozone (O₃) levels on weekends in parts of California’s South Coast (Los Angeles) Air Basin (SoCAB) have been as high as or higher than on weekdays, even though ambient levels of O₃ precursors are lower on weekends than on weekdays. A field study was conducted in the Los Angeles area during fall 2000 to test whether proposed relationships between emission sources and ambient nonmethane hydrocarbon (NMHC) and oxides of nitrogen (NO_x) levels can account for observed diurnal and day-of-week variations in the concentration and proportions of precursor pollutants that may affect the efficiency and rate of O₃ formation. The contributions to ambient NMHC by motor vehicle exhaust and evaporative emissions, estimated using chemical mass balance (CMB) receptor modeling, ranged from 65 to 85% with minimal day-of-week variation. Ratios of ambient NO_x associated with black carbon (BC) to NO_x associated with carbon monoxide (CO) were approximately 1.25 ± 0.22 during weekdays and 0.76 ± 0.07 and 0.52 ± 0.07 on Saturday and Sunday, respectively. These results demonstrate that lower NO_x emissions from diesel exhaust can be a major factor causing lower NO_x mixing ratios and higher NMHC/NO_x ratios on weekends. Nonmobile sources showed no significant day-of-week variations in their contributions to NMHC. Greater amounts of gasoline emissions are carried over on Friday and Saturday evenings but are, at most, a minor factor contributing to higher NMHC/NO_x ratios on weekend mornings.