Leachability of municipal solid waste ashes in simulated landfill conditions

In Japan the volume of municipal solid waste is reduced by incineration, with fly ash and bottom ash disposed in controlled landfills. The leachability of anions and heavy metal cations, Zn, Cu and Pb, from MSW fly ash and bottom ash at different pHs was examined using batch- and column-leaching tests. The MSW ashes had a high capacity for neutralizing acids. Behaviour during leaching depended on the pH of the solution. For the volumes applied, the leachabilities of MSW fly ash were very similar at pHs from 3 to 6. Due to its amphoteric nature, Pb is leachable at pHs of approximately 10 or more, with leachate concentrations of about 3 and 3-10mg/L for the fly ash and bottom ash, respectively, much higher than for Zn and Cu. Pb concentrations for most leaching solutions were 1 and 3mg/L for the fly ash and bottom ash, respectively. Zn, and Cu leached at low concentrations for solutions of pH 3-6. Na and K ions leached at high concentrations of approximately 5000 mg/L in the first batch leaching test, decreasing to 10mg/L by the fourth leach. Ca and Mg ions leached more gradually than Na and K. Cl(-) and SO(4)(2+) ions were the major anions in the MSW ash. The high pH and cation leaching are expected to have negative impacts on the performance of clay liners.     

Methodological approach towards the definition of new storage conditions for inert wastes

In 1997, the French Ministry of Environment launched studies aiming to define a specific regulation concerning inert waste disposal in order to limit potential impact of such facilities on the environment by fixing minimum requirements. A model (chemical model/hydrodynamic model) was developed to determine dumping conditions. This model was then applied on two defined scenarios (landfill surface, effective rainfalls...) in order to study the sulphate concentrations in aquifer system immediately downstream from the storage facility. Results allow us to determine in which conditions the sulphates concentrations are compatibles with the potentially drinkable character of the groundwater. They more specifically concern the nature of the waste disposed of, the efficient rainfalls and the landfill area.     

Quantifying dry NH3 deposition to an ombrotrophic bog from an automated NH3 field release system

Providing an accurate estimate of the dry component of N deposition to low N background, semi-natural habitats, such as bogs and upland moors dominated by Calluna vulgaris is difficult, but essential to relate nitrogen deposition to effects in these communities. To quantify the effects of NH₃ inputs to moorland vegetation growing on a bog at a field scale, a field release NH₃ fumigation system was established at Whim Moss (Scottish Borders) in 2002. Gaseous NH₃ from a line source was released along of a 60 m transect, when meteorological conditions (wind speed >2.5 m s^?1 and wind direction in the sector 180–215°) were met, thereby providing a profile of decreasing NH₃ concentration with distance from the source. In a complementary study, using a NH₃ flux chamber system, the relationships between NH₃ concentrations and cuticular resistances were quantified for a range of NH₃ concentrations and micrometeorological conditions for moorland vegetation. Cuticular resistances increased with NH₃ concentration from 11 s m^?1 at 3.0 μg m^?3 to 30 s m^?1 at 30 μg m^?3. The NH₃ concentration data and the concentration-dependent canopy resistance are used to calculate NH₃ deposition taking into account leaf surface wetness. The implications of using an NH₃ concentration-dependent cuticular resistance and the importance for refining critical loads are discussed.     

Effects of the type of sintering atmosphere on the chromium leachability of thermal-treated municipal solid waste incinerator fly ash

The sintering process offers an opportunity to combine detoxification and resource recovery for the treatment of municipal solid waste (MSW) incinerator fly ash. However, the chromium (Cr) in the sintered fly ash becomes more readily leachable with increasing sintering time and temperature, thus posing severe threats to the environment and human health when the sintered ash is recycled or reused. This study investigated the enhanced leachability of fly ash containing Cr, by heating the chromium (III) oxide (Cr2O3)-spiked fly ash to 800 degrees C in atmospheres containing air, nitrogen gas (N2), and 5% H2 + 95% N2, respectively. The results indicated that trivalent chromium was converted to its soluble hexavalent form during sintering in the air atmosphere; whereas sintering in a nitrogen atmosphere significantly reduced the leachability of Cr due to lack of oxygen (O2) to oxidize. The effects of the sintering temperature on the total chromium content and the leaching concentration in the toxicity characteristic leaching procedure (TCLP) extract are also discussed.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

Production of semiochemical and allelobiotic agents as a consequence of aphid feeding

Aphids have an extremely intimate relationship with their plant hosts. Although this might suggest that aphid infestation would be largely cryptic, there are a wide range of changes that can be detected behaviourally, chemically and also at the molecular genetic level. Colonisation by aphids can cause release of semiochemicals characteristic of the aphid species and besides reducing acceptability to incoming aphids; these can enable recruitment of specific parasitoids. Some semiochemicals involved in these processes can also influence the defence status of neighbouring intact plants through air or the rhizosphere. Electrophysiological and behavioural studies on the aphids, their parasitoids and other organisms facilitate the identification of compounds having direct effects on plant defence. New developments from work on semiochemicals such as (Z)-jasmone and 6-methyl-5-hepten-2-one, and allelobiotic agents such as 6-hydroxy-1,2,3,4-tetrahydro-β-carboline-3-carboxylic acid and 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one, as well as new work on these compounds and others as potential phytopheromones are discussed.     

Degradation of pentachlorophenol in a contaminated soil suspension using hybrid catalysts prepared via urea�Cformaldehyde polycondensation between iron(III)-tetrakis(p-hydroxyphenyl)porphyrin and humic acid

Hybrid catalysts were synthesized by attaching iron(III)-tetrakis(p-hydroxyphenyl)porphyrin (FeTPP(OH)₄) to humic acid (HA) via urea–formaldehyde polycondensation. FTIR spectra of the prepared catalysts indicated that the catalysts prepared via urea–formaldehyde polycondensation contained cross-links between the phenolic groups of FeTPP(OH)₄ and HA, which contains aliphatic amine functional groups. The prepared catalysts were examined for their ability to catalyze the oxidative degradation of pentachlorophenol (PCP) in a contaminated soil suspension. The levels of PCP degradation and dechlorination for the hybrid catalysts were significantly higher than those for the non-modified catalyst, FeTPP(OH)₄.     

Heritable pheromone blend variation in a local population of the butterbur borer moth Ostrinia zaguliaevi (Lepidoptera: Crambidae)

Summary. In a local population of Ostrinia zaguliaevi Mutuura & Munroe (Lepidoptera: Crambidae), extensive variation was found in the blend ratio of three sex pheromone components, (Z)-9-tetradecenyl acetate (Z9-14:OAc, 10.2-63.8%), (Z)-11-tetradecenyl acetate (Z11-14:OAc, 32.2-86.8%), and (E)-11-tetradecenyl acetate (E11-14:OAc, 2.1-11.9%). The variation was observed over a three-year period (2002-2004). Mother-daughter regression analyses have shown that although the heritability of the minor component E11-14:OAc was not significant, the heritability of the proportions of Z9-14:OAc and Z11-14:OAc were substantial (0.5–0.6). In artificial selection experiments, the mean % Z9-14:OAc in the sex pheromone changed significantly within three generations (37% in the control line, 48 and 52% for two lines selected for increase, and 23 and 30% for two lines selected for decrease). Despite these changes, the amounts of fatty acyl pheromone precursors, (Z)-9-, (Z)-11- and (E)-11-tetradecenoate, in the pheromone gland were not significantly affected by the selection. Taken together, variation in the pheromone blend of O. zaguliaevi is likely to be attributable to a few genes involved in the reduction or acetylation of fatty acyl pheromone precursors, the last two steps in pheromone biosynthesis.