Phosphorus release from ash and remaining tissues of two wetland species after a prescribed fire

Dead plant tissues and ash from a prescribed fire play an important role in nutrient balance and cycling in the Florida Everglades ecosystem. The objective of this study was to assess the dynamic changes in total phosphorus release (TPr) from ash or tissues of either cattail (Typha domingensis Pers.) or sawgrass (Cladium jamaicense Crantz) to water. Natural-dead (senesced-dead) and burning-dead (standing-dead due to a prescribed fire) cattail and sawgrass were collected from highly (H) and moderately (M) impacted zones in the Florida Everglades. This experiment was conducted by incubation and water-extraction of the materials in plastic bottles for 65 d at room temperature (24 +/- 1 degrees C). Results showed that 63 to 88%, 17 to 48%, 9 to 20%, and 13 to 28% of total P (TPp) were released as TPr from cattail and sawgrass ash, cattail tissues from the H zone, cattail tissues, and sawgrass tissues from the M zone, respectively. TPp means total P of plant tissues, whereas TPr is total P release from the tissues or ash. Most of the TPr was released within 24 h after burning. The quick release of TPr observed in this experiment may help explain the P surge in the surface water immediately following a fire in the marsh. These findings suggest that prescribed burning accelerates P release from cattail and sawgrass. They also imply that it is very important to keep the water stagnant in the first 24 h to maximize the benefits of a prescribed fire in the Everglades.     

Water quality trends at inflows to Everglades National Park, 1977-2005

Restoration of the Florida Everglades is important for the health of the natural system, including both the "River of Grass" and its downstream estuaries. Water quality improvement is one indicator of successful restoration in this complex ecosystem. Using the period of record of 1977 through 2005, we evaluated data from seven inflow sites to the Everglades National Park (ENP) for temporal trends of various forms of phosphorus (P) and nitrogen (N) and analyzed them using principal component analysis and factor analysis without flow adjustments. Locally estimated scatter plot smoothing (LOESS) trend lines identified two inflection points (three time periods) of changing trend in total P (TP) concentration at the seven sites. Results indicated that overall water quality in ENP inflow improved from 1977 to 2005, with significant downward trends in TP concentration. The overall trend ofTP is probably mediated by hydrology, which is evident by a negative relationship between flow and annual average TP concentration at the majority of stations within the available data, although additional changes in vegetation due to hydroperiod may have some effects. Total N (TN), total Kjeldahl N, and total organic N concentrations also generally decreased at inflow sites. Water quality standards for TP, TN, and NH4+ -N were exceeded at selected sites during the study period. Principle component analysis and factor analysis detected a grouping of sampling sites related to the water delivery system that could be used as indicators to better manage monitoring resources. Study results suggest that water quality data analyses could provide additional insight into the success of a restoration management plan and on how monitoring may be modified for more efficient use ofresources.     

Occurrence, bioaccumulation and potential sources of polybrominated diphenyl ethers in typical freshwater cultured fish ponds of South China

To determine the potential input sources of polybrominated diphenyl ethers (PBDEs) to fish farming environments in South China, samples of seven various environmental matrices were collected from October 2006-September 2007. Tri- to deca-BDEs were detected in all samples analyzed, with mean concentrations (±standard deviations) at 5.7 ± 3.6 ng/L in pond water, 15 ± 11 ng/g dry wt. in pond sediment, 12 ± 3.8 ng/g dry wt. in bank soil, 21 ± 20 ng/g lipid wt. in fish, and 93 ± 62 ng/g lipid wt. in fish feeds. In addition, BDE-209 was the major constituent in all samples except fish and BDE-47 was predominant in fish samples. Relatively high abundances of BDE-49 were detected in all the samples compared to those in the penta-BDE technical products. Several bioaccumulation factors were evaluated. Finally, statistical analyses suggested that fish feed, as well as pond water at a lesser degree, may have been the major source of PBDEs in freshwater farmed fish.     

Experimental field estimation of organic nitrogen formation in tree canopies

The content of organic N has been shown in many studies to increase during the passage of rain water through forest canopies. The source of this organic N is unknown, but generally assumed to come from canopy processing of wet or dry-deposited inorganic N. There have been very few experimental studies in the field to address the canopy formation or loss of organic N. We report two studies: a Scots pine canopy exposed to ammonia gas, and a Sitka spruce canopy exposed to ammonium and nitrate as wet deposition. In both cases, organic N deposition in throughfall was increased, but only represented a small fraction (<10%) of the additional inorganic N supplied, suggesting a limited capacity for net organic N production, similar in both conifer canopies under Scottish summertime conditions, of less than 1.6 mmol N m⁻² mth⁻¹ (equivalent to 3 kg N ha⁻¹ y⁻¹).     

Leachability and leaching patterns from aluminium-based water treatment residual used as media in laboratory-scale engineered wetlands

Concept and purpose  

Virtually all water treatment facilities worldwide generate an enormous amount of water treatment residual (WTR) solids for which environmentally friendly end-use options are continually being sought as opposed to their landfilling. Aluminium-based WTR (Al-WTR) can offer huge benefits particularly for phosphorus (P) removal and biofilm attachment when used as media in engineered wetlands. However, potential environmental risks that may arise from the leaching out of its constituents must be properly evaluated before such reuse can be assured. This paper presents results of an assessment carried out to monitor and examine the leachability and leaching patterns of the constituents of an Al-WTR used as media in laboratory-scale engineered wetland systems.     

Development of a variable configuration cascade impactor for aerosol size distribution measurement

In atmospheric aerosol studies, it is often required to use two different impactors, namely, the normal pressure and the low-pressure impactor, to measure the mass-size distribution over a wide size range. From the perspective of rendering the system compact for such measurements, it may be more advantageous to combine the two features in a single instrument. In an effort towards exploring this option, a variable configuration cascade impactor (VCCI) comprising of 7 normal pressure and 4 low-pressure stages has been designed and developed. In configuration-1, it operates as a low-pressure impactor, with a sampling flow rate of 10 L min^?1 and classifies the particles from 0.1 to 21 μm in eleven size classes. In configuration-2, it operates as a normal pressure impactor, with a sampling flow rate of 45 L min^?1, and classifies the particles from 0.53 to 10 μm in seven size classes. As part of performance evaluation of the system, the deposit patterns and the integral performance have been studied. For integral performance, a comparative mass-size distribution measurement between VCCI and standard Andersen impactor was carried out. Its performance was also evaluated against the GRIMM Scanning Mobility Particle Sizer (SMPS) in the common size range of both these instruments and against GRIMM Optical Particle Counter (OPC). In addition to this, VCCI was evaluated for its performance in the PM_x configuration obtained by removing a few of the impactor stages sequentially and measuring corresponding size distribution for every stage removed. Changes in the distribution parameters due to spillover of the deposits of previous stage to remaining stages were within 10%. This variation is well within the generally accepted value for all environmental measurement related applications.     

A comparative study for the sorption of Cd(II) by K-feldspar and sepiolite as soil components, and the recovery of Cd(II) using rhamnolipid biosurfactant

This study investigated the sorption characteristics and recovery of selected heavy metal Cd(II) from K-feldspar and sepiolite, representative soil components, using rhamnolipid biosurfactant. Although the proposed technique was classified as a soil bioremediation process, it can also be applied to treatment of waste waters containing Cd(II) ions with minor modifications. The effect of initial Cd(II) concentration on sorption capacity was characterized by determining the sorption isotherms. Of the four models examined, the Freundlich model showed the best fit for the sorption of Cd(II) on K-feldspar, whereas the Langmuir-model was used successfully to characterize the sorption of Cd(II) on sepiolite. Although a high Cd(II) uptake of 7.49 mmol/kg by K-feldspar was obtained, sepiolite was a superior Cd(II) accumulater, with a maximum Cd(II) uptake of 24.66 mmol Cd(II)/kg. The presence of Cd(II) in the sepiolite or K-feldspar prior to addition of the rhamnolipid generally resulted in less rhamnolipid sorption to sepiolite or K-feldspar. The maximum Cd(II) desorption efficiency by rhamnolipid from K-feldspar was substantially higher than that of sepiolite and determined to be 96% of the sorbed Cd(II), whereas only 10.1% of the sorbed Cd(II) from sepiolite was recovered by rhamnolipid solution.     

Demolish it and They Will Come: Estimating the Economic Impacts of Restoring a Recreational Fishery1

Abstract: This paper presents the results of an ex post survey of recreational anglers for the lower Kennebec River, post‐Edwards Dam removal. To the best of our knowledge, this study represents one of the first ex post analyses of fisheries restoration from dam removal. We find significant benefits have accrued to anglers using the restored fishery. Specifically, anglers are spending more to visit the fishery, a direct indication of the increased value anglers place on the improved fishery. Anglers are also willing to pay for increased angling opportunities on the river. These findings have policy implications for other privately owned dams that are currently undergoing relicensing and/or dam removal considerations. Our findings may also hold implications for fisheries that have deteriorated due to historic dam construction.     

Bio-syngas production with low concentrations of CO2 and CH4 from microwave-induced pyrolysis of wet and dried sewage sludge

This paper assesses the feasibility of producing syngas from sewage sludge via two pyrolysis processes: microwave-induced pyrolysis (MWP) and conventional pyrolysis (CP). The changes in the composition of the produced gas as a function of the pyrolysis treatment and the initial moisture content of the sludge were evaluated. It was found that MWP produced a gas with a higher concentration of syngas than CP, reaching values of up to 94vol%. Moreover, this gas showed a CO2 and CH4 concentration around 50% and 70%, respectively, lower than that obtained in the gas from CP. With respect to the effect of moisture on gas composition, this was more pronounced in CP than in MWP. Thus, the presence of moisture increases the concentration of H2 and CO2 and decreases that of CO, especially when CP was used. In order to elucidate the behaviour of CO2 during the pyrolysis, the CO2 gasification kinetics of the char obtained from the pyrolysis were investigated. It was established that in microwave heating the gasification reaction is much more favoured than in conventional heating. Therefore, the low concentration of CO2 and the high concentration of CO in the microwave pyrolysis gas could be due to the self-gasification of the residue by the CO2 produced during the devolatilization of the sewage sludge in the pyrolysis process.     

Theoretical study on the chemical properties of polybrominated diphenyl ethers

Density functional theory calculations at the B3LYP/6-31+G(d) and B3LYP/aug-cc-pVDZ levels were performed to obtain the equilibrium structures, thermodynamic properties, and electron affinities (EA) of 14 polybrominated diphenyl ether (PBDE) congeners in the gas phase. All congeners except for those of symmetric BDE are found to have two or more conformational isomers. The optimized geometries of the most stable conformational isomers are in agreement with recently published X-ray crystallographic data. The thermodynamic properties of the congeners with a given number of bromine substitutions are strongly dependent on the substitution pattern, whereas the EA values also depend on the number of bromine substitutions. The vertical electron affinities (EA(Ver)) calculated for the selected BDE congeners at the B3LYP/aug-cc-pVDZ level are all positive except for di-BDEs, and are correlated with the initial reductive debromination rate constants obtained recently [Keum, Y.-S., Li, Q.X., 2005. Reductive debromination of polybrominated diphenyl ethers by zerovalent iron. Environ. Sci. Technol. 39, 2280]. All adiabatic electron affinities (EA(Ada)) are positive, and suggest that the BDE congeners act as electron acceptors when reacting with receptors in living cells. The calculated EA(Ada) values differ considerably from those of EA(Ver) because of the large geometrical relaxation from the neutral to the anionic BDE congeners, highlighted by the lengthening of a C-Br bond. The elongated C-Br bond, which occurs at the alpha position, is directly involved in the debromination of n-bromodiphenyl to (n-1)-bromodiphenyl ethers in the reductive debromination experiments.