Collection of Fly Ash with High Electrical Resistivity in a Pilot Plant Electrostatic Precipitator Preceded by the EPA/SoRI Precharger

It is well known that dust with high electrical resistivity is difficult to collect in electrostatic precipitators (ESP). The difficulty is primarily due to poor particle charging. This poor particle charging is not because particles having high electrical resistivity are intrinsically difficult to charge, but because back corona (which results from deposition of material on the collection electrode) produces a bipolar ion field. When ions of both positive and negative polarity are present in the charging region, the competing effects of the two, plus low values of electric field, produce low electrical charge on particles.     

Fluoride distribution and the effect of some ions along Alexandria coastal Mediterranean seawater of Egypt

The coastal seawater of Mediterranean of Alexandria receives large amount of discharged waters containing industrial wastes, sewage, and agricultural and domestic drainage. Fluoride and some parameters were( chemical and physical) determined. The data gave indication that the content and the amount of the discharged water largely affect the chemical composition of the coastal water. Stepwise regression analysis was highly significant and the model was very fruitful, where the observed and calculated values were mostly concordant. This may indicated that there was a relation between fluoride content in cosslal seawater and its content in the discharged water.     

Habitat association studies in conjunction with adaptive cluster samples

Habitat association studies investigate the relationships between habitat characteristics and animal usage of study regions. These studies are often conducted in conjunction with surveys designed primarily to estimate population totals. This paper shows that habitat association studies may proceed from surveys using adaptive cluster sampling. The manner in which units appear in the sample turns out not be relevant to the habitat association study, which proceeds as though the units came from a simple random sample. However, it is also shown that the information about the habitat association parameters is greater than one would expect from a simple random sample of the same general size.     

Trap mortality in mark-recapture studies

When animals die in traps in a mark-recapture study, straightforward likelihood inferences are possible in a class of models. The class includes M₀, M_t, and M_b as reported by White et al. (Los Alamos National Laboratory, LA-8787-NERP, pp 235, 1982), those that do not involve heterogeneity. We include three Markov chain “persistence” models and show that they provide good fits in a trapping study of deer mice in the Cascade-Siskiyou National Monument of Southern Oregon where trapping mortality was high.

Identity and distribution of residues of energetic compounds at army live-fire training ranges

Environmental investigations have been conducted at 23 military firing ranges in the United States and Canada. The specific training facilities most frequently evaluated were hand grenade, antitank rocket, and artillery ranges. Energetic compounds (explosives and propellants) were determined and linked to the type of munition used and the major mechanisms of deposition.     

Portable X-ray fluorescence in the characterisation of arsenic contamination associated with industrial buildings at a heritage arsenic works site near Redruth,Cornwall, UK

An investigation using in situ analysis by portable X-ray fluorescence (PXRF) has shown that contamination present on industrial buildings at a heritage arsenic works site near Redruth, Cornwall, UK results from the absorption of arsenic by porous and semi-porous building materials that were in contact with arsenic-rich flue gases. Results from a preliminary survey indicate that arsenic remains locked in these materials and is being gradually leached out by weathering processes. This weathering causes general contamination of the adjacent building surfaces averaging 1845 microg g(-1) arsenic, presumably caused by evaporation of leach solutions in contact with air at the surface of the building materials. More extensive crystalline deposits were found under arches protected from dissolution and further dispersion by rain water. These deposits appeared to comprise calcium sulfate (gypsum), associated with on average between 1.2 and 6.8% m/m As. In situ PXRF proved to be highly effective in locating sources of contamination at the site and in providing data that allowed a hypotheses for the origin of this contamination to be formulated and tested in the field.     

Effects of workplace thermal conditions on safe work behavior

The effect of workplace thermal conditions on worker safety has not previously been adequately investigated, due in part to the difficulty of defining a suitable safety performance measure. This report describes a study conducted in two industrial plants to determine if a correlation exists between the safety-related behavior of workers and workplace thermal conditions. Both heat exposure measurements and behavioral observations were taken over a 14-month period, for a total of over 17,000 observations. The results indicate that temperatures below and above those typically preferred by most people have a significantly detrimental effect on the safety-related behavior of workers. This is demonstrated by an index based on the ratio of observed unsafe behaviors to the total number of observed behaviors. The relationship between this index of unsafe behavior and the ambient temperature formed a U-shaped curve. The minimum unsafe behavior index occurred within the zone of preferred temperature (approximately 17°C to 23°C, WBGT). Other factors such as metabolic workload and time during the shift also had significant effects on worker safety-related behavior.     

COMPARATIVE BASES OF INDUSTRY POLLUTION ABATEMENT AND COMMERCIAL INNOVATION: IMPLICATIONS FOR WATER RESOURCES MANAGEMENT1

ABSTRACT: Adoption, maintenance, and operation of pollution control technology by manufacturing firms is essential to effective water resource management. In this study of 102 industries, we find that company adoption of pollution control technology and practices is primarily associated with two factors: (1) the overall company capacity for innovation in its production technology; and (2) company relationships with state and federal pollution control agencies, local government officials and professionals. Managerial attitudes about pollution and government regulation are not associated with either pollution control or commercial innovation, but are seen as basic to industry-government relationships. The data suggest an important regulatory dilemma, the problem of regulating a large number of small companies with a low capacity for innovation, but which when taken together account for large volumes of toxic effluent.     

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.     

The influence of carbon emission disclosure on enterprise value under ownership heterogeneity: evidence from the heavily polluting corporations

Environmental Science and Pollution Research - Under the background that China puts forth the goals of “Emission Peak” and “Carbon Neutrality”, heavily polluting...