Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Transition metal-modified zinc oxides for UV and visible light photocatalysis

In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1?at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1?at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.     

Residue determination and dissipation of ioxynil octanoate in maize and soil

A simple and efficient residue analysis method for direct determination of ioxynil octanoate in maize and soil was developed and validated with High Performance Liquid Chromatography-Ultra Violet (HPLC-UV). The samples were extracted with mixtures of acetonitrile and deionized water followed by Solid Phase Extraction (SPE) to remove co-extractives prior to analysis by HPLC-UV. The recoveries of ioxynil octanoate extracted from maize and soil samples ranged from 86 %–104 % and 84 %–96 %, respectively, with relative standard deviation (RSD) less than 7.84% and sensitivity of 0.01 mg kg^?1. The method was applied to determine the residue of ioxynil octanoate in maize and soil samples from experimental field. Data had shown that the dissipation rate in soil was described as pseudo-first-order kinetics and the half-life (t_1/2) was less than 1.78 days. No ioxynil octanoate residue (<0.01 mg kg^?1) was detected in maize at harvest time withholding period of 60 days after treatments of the pesticide. Direct confirmation of the analytes in field trial samples was realized by Liquid Chromatography-Mass Spectrometry (LC-MS).     

Tylosin Sorption to Silty Clay Loam Soils,Swine Manure,and Sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 μ mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K _f ) or K _d values, were calculated. K _f values for the silty clay loams were similar, not influenced by landscape position, and averaged 1350 with isotherm slopes ranging from 0.85 to 0.93. K _f values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K _d values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K _f values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

The Odor Impact Model

Abstract

This paper presents the simulation and field evaluation results of two approaches to localize pollutant emission sources with open-path Fourier transform infrared (OPFTIR) spectroscopy. The first approach combined the plume’s peak location information reconstructed from the Smooth Basis Function Minimization (SBFM) algorithm and the wind direction data to calculate source projection lines. In the second approach, the plume’s peak location was determined with the Monte Carlo methodology by randomly sampling within the beam segment having the largest path-integrated concentration. We first conducted a series of simulation studies to investigate the sensitivity of using different basis functions in the SBFM algorithm. It was found that fitting with the beta and Weibull basis functions generally gave better estimates of the peak locations than with the normal basis function when the plumes were mainly within the OP-FTIR’s monitoring line. However, for plumes that were symmetric to the peak position or spread over the OP-FTIR, fitting with the normal basis function gave better performance. In the field experiment, two tracer gases were released simultaneously from two locations and the OP-FTIR collected data downwind from the sources with a maximum beam path length of 97 m. For the first approach, the release locations were within the 0.25- to 0.5-probability area only after the uncertainty of the peak locations was included in the calculation process. The second approach was easy to implement and still performed as satisfactorily as the first approach. The distances from the sources to the best-fit lines (i.e., the regression lines) of the estimated locations were smaller than 10 m.     

Inter-Laboratory Comparison of Air Particulate Monitoring Data

ABSTRACT

This paper compares three analytical methods that are often used to analyze composition of atmospheric aerosol: Ion Chromatography (IC), Proton Induced X-ray Emission (PIXE), and X-Ray Fluorescence (XRF). Three monitoring studies are discussed: (1) a comparison of air particulate data collected by several independent sampler/ analytical technique suites run by different laboratories; (2) a study involving two identical samplers and a single suite of analytical techniques; and (3) analysis of identical aerosol samples by two different techniques (XRF vs. PIXE). While the XRF versus PIXE project shows a very good agreement for most elements, the first interlaboratory study demonstrates the “real-life” noise introduced into the final data set by various sampling complications and different collection characteristics of the samplers used. The XRF versus PIXE study also revealed an unexplained deviation in measured sulphur concentrations for very lightly loaded samples. In the five-sampler comparison, two data sets provided by IC were approximately 20% lower than the three data sets obtained by PIXE and XRF. When two identical IMPROVE-compat-ible samplers were used and samples were subjected to similar procedures and the same analytical techniques, the variability between the two air concentration data sets significantly decreased.     

Biodegradation of the herbicide glyphosate by filamentous fungi in platform shaker and batch bioreactor

The biodegradation conducted by microorganisms on herbicide glyphosate (N-phosphonomethylglycine) was investigated. Five strains of filamentous fungi belonging to the Fusarium genre were grown on Czapeck medium without phosphorous and supplemented with the addition of glyphosate. The assays were conducted to determine the ability of use as a phosphorous source, the inhibition caused by presence of herbicide, and the biodegradation in shaker and bioreactor by Fusarium strains. It was observed that the herbicide did not show any negative effect on microrganisms by quantity of the biomass. Among the strains tested, no inhibition was noted by the addition of glyphosate even at a high concentration. All strains studied were able to biodegrade it and use the herbicide as a phosphorous source. The formation of consortium was not better than the strains tested in pure culture. The biodegradation in the bioreactor was better than in the shaker. However, there wasn't any influence on biodegradation rate by changing the amount of oxygen in the system.     

Use of fungi for the bioconversion of rice straw into cellulase enzyme

Cellulase production was carried out by solid state bioconversion (SSB) method using rice straw, a lignocellulosic material and agricultural waste, as the substrate of three Trichoderma spp. and Phanerochaete chrysosporium in lab-scale experiments. The results were compared to select the best fungi among them for the production of cellulase. Phanerochaete chrysosporium was found to be the best among these species of fungi, which produced the highest cellulase enzyme of 1.43 IU/mL of filter paper activity (FPase) and 2.40 IU/mL of carboxymethylcellulose activity (CMCase). The “glucosamine” and “reducing sugar” parameters were observed to evaluate the growth and substrate utilization in the experiments. In the case of Phanerochaete Chrysosporium, the highest glucosamine concentration was 1.60 g/L and a high concentration of the release of reducing sugar was measured as 2.58 g/L obtained on the 4th day of fermentation. The pH values were also recorded. The range of the pH was about 5.15 to 5.56 in the case of Phanerochaete Chrysosporium.     

Some Technical and Economic Aspects of Residual Fuel Oil Desulfurization

Combustion of residual, the most common type of fuel oil used in industrial and commercial steam generating plants, accounts for about 600,000 tons or 37 percent of the sulfur oxide emissions in New York state. On the average, residual oil available in New York state contains about 2.2 percent sulfur and is consumed at an annual rate of approximately 85 million barrels. The removal of sulfur from many types of residuals should become economically feasible as a result of the development of the HDS and H-Oil hydrodesulfurization processes. From studies recently made, these methods of desulfurization have been estimated to vary from a minimum of no appreciable increase in overall cost to a maximum of about one cent per gallon. The by-product distillates produced in hydrodesulfurization are a very significant factor in making the process economical and the demand for these is increasing at a greater rate than residual.     

Oil spill cleanup using graphene

In this article, we study the use of thermally reduced graphene (TRG) for oil spill cleanup. TRG was synthesized by thermal exfoliation of graphite oxide and characterized by X-ray diffusion, Raman spectroscopy, SEM, TEM, elemental analysis, and Brunauer–Emmett–Teller (BET) surface area measurement. Various aspects of the sorption process have been studied including the sorption capacity, the recovery of the adsorbed oil, and the recyclability of TRG. Our results shows that TRG has a higher sorption capacity than any other carbon-based sorbents, with sorption capacity as high as 131 g of oil per gram TRG. With recovery of the sorbed oil via filtration and reuse of TRG for up to six cycles, 1 g of TRG collectively removes approximately 300 g of crude oil. Moreover, the effects of TRG bulk density, pore volume, and carbon/oxygen ratio and the oil viscosity on the sorption process are also discussed.