城市污水生物处理系统中微生物酶的活性及其分布

通过水解模式底物进行分光光度测定的方法,研究了城市污水生物处理系统中微生物酶的活性.选取亮氨酸氨基肽酶、β-葡萄糖苷酶、碱性磷酸酶和脂酶等胞外酶进行分析,结果发现4种胞外酶的平均活性在31.O～88.5 μmol/(L·h),其中76.9%～94.8%的酶活性分布在活性污泥中,说明绝大部分胞外酶是与细胞相连或固定在细胞外多聚絮体基质里.混合水样和出水水样中的DOC几乎相等,而各胞外酶与DOC不存在任何显著的相关关系.增加NO3-浓度可提高亮氨酸氨基肽酶和β-葡萄糖苷酶的活性,但对碱性磷酸酶和脂酶却有明显的抑制作用.     

温度和pH值对活性污泥法脱氮除磷的影响

温度和pH值是影响污水脱氮除磷效果的2个重要因素.试验采用连续搅拌槽式反应器(continuous stirred tank reactor,CSTR),通过对不同温度和pH值条件下的硝化、反硝化、释磷和吸磷反应速率的测定,总结出温度和pH值对活性污泥生化反应速率的影响规律.试验表明,硝化和反硝化速率随温度的升高而加快.在5℃和33℃时,硝化速率分别为0.01 kg NH4 -N/(kg VSS·d)和0.28 kg NH4 -N/(kg VSS·d);在5℃和30℃时,反硝化速率分别为0.097 kg NO3--N/(kg VSS·d)和0.476 kg NO3--N/(kg VSS·d);但温度对吸磷和释磷速率的影响不大.pH值对硝化、反硝化、吸磷和释磷速率均有显著影响,在pH值为7.74时,硝化速率为0.095 kg NO3--N/(kg VSS·d);而在pH值为4.9和10.08时,硝化速率仅为0.005 kg NO3--N/(kg VSS·d)和0.006 kg NO3--N/(kg VSS·d).在pH值为7.85时,反硝化速率达到最大值0.36 kg NO3--N/(kg VSS·d);而在偏酸性和碱性条件下,反硝化速率显著下降.     

珠江三角洲地区大气中有机氯农药的被动采样观测

利用PUF被动采样装置,对珠江三角洲地区大气中有机氯农药(OCPs)进行监测.结果显示,广东省大气中有机氯农药主要是滴滴涕(DDTs)、六六六(HCH)及氯丹(Chlordane),其中DDTs约占总OCPs的54.5%;香港大气中农药残留主要是氯丹和DDTs,氯丹约占总含量的51.3%.珠三角地区大气中有机氯农药空间分布差异明显(580-5500pg·m-3),香港平均浓度远远低于广东省.另外,广东省仍有工业DDT在使用,造成广东省大气中有"新"的工业DDT输入;而三氯杀螨醇是香港大气中DDT高含量的重要来源;广东省和香港HCH主要源于林丹使用的残留,香港的Eastern及Tsuen Wan源于工业六六六使用的残留;珠江三角洲所有采样点的HCB含量较低,大气中HCB少量残留可能是HCB作为药物中间体的化学合成及HCB在大气中长距离传输的结果.     

A scenario-based study on information flow and collaboration patterns in disaster management

Disaster management (DM) is a continuous, highly collaborative process involving governments, DM organisations, responders, the construction sector, and the general public. Most research approaches to DM include the development of information and communication technologies (ICT) to support the collaboration process rather than the creation of a collaboration process to provide information flows and patterns. An Intelligent Disaster Collaboration System (IDCS) is introduced in this paper as a conceptual model to integrate ICT into DM and the mitigation process and to enhance collaboration. The framework is applicable to the collaboration process at the local, regional and national levels. Within this context, the deployment of ICT tools in DM is explored and scenario-based case studies on flooding and terrorism—examples of natural and human-induced disasters, respectively—are presented. Conclusions are drawn regarding the differences found in collaboration patterns and ICT used during natural and human-induced disasters and the differences between currently available ICT and proposed ICT.     

面包酵母菌对Pb2+和Cd2+单双重金属离子体系的吸附效果

为了探讨灭活面包酵母菌对Pb2+、Cd2+的单、双重金属离子体系(以下简称双离子体系)的吸附效果及影响机制,选择灭活面包酵母菌为吸附剂,对Pb2+、Cd2+的单离子体系和Pb2+-Cd2+双离子体系吸附动力学过程和等温吸附效果进行研究.结果表明,不同离子体系中,在相同初始浓度情况下,面包酵母菌对Pb2+的吸附量总是大于对Cd2+的吸附量.试验条件下,面包酵母菌对Pb2+、Cd2+的单离子体系和Pb2+-Cd2+双离子体系等温吸附符合Langmuir模型,最大吸附量qmax分别为0.414 9 mmol/g、0.346 8 mmol/g和0.488 5 mmol/g.SEM/EDS分析表明,Pb2+、Cd2+被吸附到菌体上,造成菌体变形或出现破裂,并使内部物质外泄,这可能是吸附进行一定时间后出现二次吸附过程的主要原因.灭活面包酵母对Pb2+和Cd2+具有良好的吸附效果,对Pb2+-Cd2+双离子体系的吸附,离子间的点位竞争和联合毒性作用是影响体系总体吸附效果的重要因素.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.     

Hierarchical priority setting for restoration in a watershed in NE Spain, based on assessments of soil erosion and ecosystem services

Maintaining and enhancing ecosystem services through the restoration of degraded ecosystems have become an important biodiversity conservation strategy. Deciding where to restore ecosystems for the attainment of multiple services is a key issue for future planning, management, and human well-being. Most restoration projects usually entail a small number of actions in a local area and do not consider the potential benefits of planning restoration at broad regional scales. We developed a hierarchical priority setting approach to evaluate the performance of restoration measures in a semiarid basin in NE Spain (the Martín River Basin, 2,112 km²). Our analysis utilized a combination of erosion (a key driver of degradation in this Mediterranean region) and six spatially explicit ecosystem services data layers (five of these maps plotted surrogates for soil retention and accumulation, water supply and regulation, and carbon storage, and one plotted a cultural service, ecotourism). Hierarchical maps were generated using a geographic information system that combined areas important for providing a bundle of ecosystem services, as state variables, with erosion maps, as the disturbance or regulatory variable. This was performed for multiple scales, thereby identifying the most adequate scale of analysis and establishing a spatial hierarchy of restoration actions based on the combination of the evaluation of erosion rates and the provision of ecosystem services. Our approach provides managers with a straightforward method for determining the spatial distribution of values for a set of ecosystem services in relation to ecological degradation thresholds and for allocating efforts and resources for restoration projects in complex landscapes.     

Arsenic geochemistry and health

Arsenic occurs naturally in the earth's crust and is widely distributed in the environment. Natural mineralization and activities of microorganisms enhance arsenic mobilization in the environment but human intervention has exacerbated arsenic contamination. Although arsenic is useful for industrial, agricultural, medicinal and other purposes, it exerts a toxic effect in a variety of organisms, including humans. Arsenic exposure may not only affect and disable organs of the body, especially the skin, but may also interfere with the proper functioning of the immune system. This paper, therefore, generally highlights the toxic effects of arsenic as well as its mobilization in the natural environment and possible controls. It also briefly attempts to outline the impact of arsenic on the immune system, whose alteration could lead to viral/bacterial infections.     

Footprints for Sustainability: The Next Steps

The concept of an ecological footprint is based on the understanding that every individual human appropriates a share of the productive and assimilative capacity of the biosphere. An ecological footprint corresponds to this exclusive biologically productive area that a defined population uses for all its resource requirements and wastes, and is expressed in terms of bioproductive space, with world-average productivity. Humanity's footprint or its aggregate ecological demand can only temporarily exceed the productive and assimilative capacity of the biosphere without liquidating and weakening the natural capital on which humanity depends fundamentally. Therefore, accounting tools for quantifying humanity's use of nature are essential for overall assessments of human impact as well as for planning specific steps towards a sustainable future.This paper discusses the strengths and weaknesses of the ecological footprint as an ecological accounting method, points out research needs for improvement of the analysis, and suggests potential new applications. The paper identifies ten new applications of the tool to make it applicable at various geographic scales and for a number of analytical and didactic purposes. Then nine methodological improvements are suggested that could refine the currently applied method, making assessments more sensitive to a larger number of ecological impacts. It concludes that many crucial questions pertinent to building a sustainable society can be addressed by current ecological footprint research. By making the method more complete, this tool could evolve from being largely of pedagogical use to become a strategic tool for policy analysis.     

The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.