Emission control for precursors causing acid rain (V): Improvement of acid soil with the bio-briquette combustion ash

The bio-briquette technique which mixes coal, biomass and sulfur fixation agent and bio-briquettes under 3-5 t/cm^2 line pressure has aroused people‘s attention in view of controlling the air pollution and the acid rain. In this paper, the physicochemical properties of bio-briquette and its ash were investigated. And the acid soil was improved by the bio-briquette combustion ash, which contained nutritive substances such as P, N, K and had the acid-neutralizing capacity(ANC). The pH, EC, effective nutrient elements(Ca, Mg, K, P and N), heavy metal elements(AI, Cu, Cd, Cr, Zn and Mn) and acid-neutralizing capacity change of ash-added soils within the range of 0-10%, were also studied. Specially, when 5% bio-briquette combustion ash was added to the tested soil, the content of the effective elements such as Ca, Mg and K rose by 100 times, ? times and twice, respectively. The total nitrogen also increased by about twice. The results showed the oxyanions such as that of AI, Cu, Cd, Cr, Zn and Mn were not potentially dangerous, because they were about the same as the averages of them in Chinese soil. It is shown that the ANC became stronger, though the ANC hardly increases in the ash-added soil. On the basis of the evaluation indices, it is concluded that the best mixture ratio is to add 2.5%--8% of the bio-briquette combustion ash to the tested soil.     

Biological removal of methanol from process condensate for the purpose of reclamation

The biological removal of methanol from condensate of ammonia manufacturing processes for the purpose of reclamation using contact type reactor was studied. Methanol of 60 mg/L was removed completely under an HRT of 1.12 h. Optimal inorganic nutrient dose was determined on evaluating methanol removal performance and dehydrogenase activities (DHA) under different nutrition doses. The optimal inorganic nutrient dose only gave an increase of conductivity of ca. 10μs/cm^2 in the effluent on treating synthetic condensate containing methanol of 30mg/L. The results demonstrated that biological removal of methanol was effective for the purpose of recovering the methanol-bearing condensate.     

浅谈测井事故的认识与处理

在测井过程中,由于各种不可预见的复杂原因,测井事故不可避免。文章分析了形成测井事故的影响因素,如井径、钻井液性能、全角变化率、操作过程、套管鞋等。一旦测井事故发生,根据卡电缆、卡仪器、断电缆的事故特点来判断事故类型,再根据各种处理方法的优缺点来处理事故;提出一些注意事项,使测井事故防患于未然。     

块石空间定向性对土石混合体力学性质的影响

土石混合体作为一种土和石的特殊混合体,其宏观变形破坏及力学性质与块石的空间定向性密切相关。为了研究块石定向性对土石混合体变形破坏机理的影响,采用二维颗粒流软件中FISH语言编写算法生成不同角度的椭圆形块石,建立土石混合体二维颗粒流数值模型,分别进行了单块石和多块石条件下土石混合体双轴试验数值模拟,对其变形破坏机理进行了深入分析。结果表明:块石角度不同时,土体中裂纹萌生位置不同;随着块石短轴方向与最大主压力轴夹角增大,土石混合体黏聚力先减小后增加,内摩擦逐渐减小;在应力峰值前的应力平缓增长阶段,土体中裂纹迅速增长,在试样强度达到峰值后进入残余强度阶段,裂纹的增速也逐渐降低;块石角度不同时,土石混合体的剪切带破坏形式不同。     

国家《大气污染防治行动计划》健康效益评估

为了提高空气质量改善进程,2013 年国家发布了《大气污染防治行动计划》。本文基于空气污染与健康效益评估模型(BenMAP),对人口分布资料、大气污染与人体健康影响的暴露反应关系等进行了本土化修正,采用“支付意愿法”与“疾病成本法”相结合的方法,系统评估了《大气污染防治行动计划》实施后,PM_2.5 污染变化引起的环境健康效益。研究结果表明,《大气污染防治行动计划》的实施将在一定程度上降低PM_2.5 环境浓度,改善环境空气质量。如果《大气污染防治行动计划》空气质量目标全面实现,可以避免城镇8.9 万居民的过早死亡,减少12 万人次住院治疗以及941 万人次的门诊和急诊病例,实现的全国健康效益约为867 亿元/ 年,说明了《大气污染防治行动计划》实施的健康有益性。本文对政府部门开展污染损失评估及制定环境健康政策具有重要的参考价值。     

便携式GC-MS在石油污染土壤应急监测中的应用

针对石油污染土壤中VOCs含量的应急监测,便携式气相色谱-质谱联用仪适用于土壤中甲苯、乙苯、二甲苯、三氯苯等13种苯系物的快速定量检测,通过对某废弃炼油厂土壤样品测定,该方法在快速定性的同时,定量测定5~20411μg/kg土壤样品具有很高的可靠性。     

杭州市水源切换对饮用水中DBPs分布影响及其健康风险评价

千岛湖配水工程改善了杭州市的供水水质,水源由钱塘江为主转变为千岛湖外调水源为主.以供水管网末端龙头为调查对象,考察了水源切换前后饮用水中消毒副产物(disinfection by-products,DBPs)的构成特征,并对DBPs存在水平的致癌和非致癌风险进行了对比分析.结果表明供水管网终端龙头水在水源切换后水质明显...     

镉"加标"沉积物对泥鳅(Misgurnus anguillicaudatus)生物毒性研究

选择泥鳅(Misgurnus anguillicaudaus)作为受试生物,以泥鳅死亡率、血液红细胞数量、红细胞体积、红细胞微核率和核异常率作为测试指标,考察了沉积物中"加标"金属镉(Cd)的毒性状况,探讨了水体沉积物中重金属的生物毒性影响.结果表明:高有机质的粘土粉砂性沉积物能够有效吸附重金属镉;镉加标暴露组泥鳅的死...     

工程机械不同工况下PM_(2.5)排放及其碳质组分特征

我国工程机械排放控制起步较晚.为研究实际工况下工程机械的PM2.5排放特性及其碳质组分构成,采用便携式颗粒物稀释采样系统,对3台工程机械(2台挖掘机和1台装载机)在不同典型工况(行驶、作业和怠速)下的PM2.5及其碳质组分〔OC(有机碳)和EC(元素碳)〕的现场排放特征进行了测试.结果表明:沃尔沃挖掘机、山河智能挖掘机的PM2.5排放因子(基于燃油)分别为1.85~3.26和1.56~2.62 g/kg,厦工装载机的PM2.5排放因子为0.98~1.48 g/kg.不同工况对PM2.5排放因子影响较大,怠速工况下PM2.5排放因子是行驶工况下的1.49~1.76倍.工程机械排放的PM2.5中,碳质组分是最主要的成分,其质量分数高达71.0%~84.5%.其中,w(OC)为44.6%~72.0%,在怠速工况下最高;w(EC)则为8.6%~30.9%,在行驶工况下较高.测试工程机械的PM2.5排放水平较高,因此应尽快加强工程机械排放的污染防治.     

两级序批式MBR膜污染特性研究

采用两级SBR与膜法相结合的两级序批式MBR工艺处理生活污水,考察两级序批式运行模式对膜污染特性的影响.对运行111 d后的平板膜污染阻力分布进行了测算,并对两级序批式MBR与连续流单级好氧MBR的平板膜污染速率进行对比试验.结果表明: 两级序批式MBR的平板膜污染阻力以凝胶极化阻力为主,占总阻力的43%,沉积阻力较低,仅占总阻力的10%;与连续流单级好氧MBR相比,两级序批式MBR可以在更高的膜通量下运行,保持更低的膜污染速率,在运行42 d后,过膜流量从100 L/h下降至85 L/h,过膜压差从1.52×10~4 Pa增加至2.22×10~4 Pa;而连续流好氧MBR系统,过膜流量从61 L/h降低至39 L/h,过膜压差却从1.01×10~4 Pa增加至2.63×10~4 Pa.研究表明,两级序批式MBR工艺可以改善膜过滤过程的水力条件,从而有效地减缓浓差极化,降低沉积污染及凝胶层污染,序批式、膜间歇运行与空曝的结合起到了关键性作用.