An Approach for Evaluating the Effectiveness of Various Ozone Air Quality Standards for Protecting Trees

We demonstrate an approach for evaluating the level of protection attained using a variety of forms and levels of past, current, and proposed Air Quality Standards (AQSs). The U.S. Clean Air Act requires the establishment of ambient air quality standards to protect health and public welfare. However, determination of attainment of these standards is based on ambient pollutant concentrations rather than prevention of adverse effects. To determine if a given AQS protected against adverse effects on vegetation, hourly ozone concentrations were adjusted to create exposure levels that “just attain” a given standard. These exposures were used in combination with a physiologically-based tree growth model to account for the interactions of climate and ozone. In the evaluation, we used ozone concentrations from two 6-year time periods from the San Bernardino Mountains in California. There were clear differences in the level of vegetation protection achieved with the various AQSs. Based on modeled plant growth, the most effective standards were the California 8-hr average maximum of 70 ppb and a seasonal, cumulative, concentration-weighted index (SUM06), which if attained, resulted in annual growth reductions of 1% or less. Least effective was the 1-hr maximum of 120 ppb which resulted in a 7% annual reduction. We conclude that combining climate, exposure scenarios, and a process-based plant growth simulator was a useful approach for evaluating effectiveness of current or proposed air quality standards, or evaluating the form and/or level of a standard based on preventing adverse growth effects.     

Human Instability in Flood Flows1

Abstract: Loss of human stability in flood flows and consequent drowning are a high personal hazard. In this paper, we review past experimental work on human instability. The results of new experiments by the Flood Hazard Research Centre (FHRC) are also reported. These new results show that low depth/high velocity flood waters are more dangerous than suggested based on previous experimental work. It is discussed how human instability can be related to two physical mechanisms: moment instability (toppling) and friction instability (sliding). Comparison of the test results with these physical mechanisms suggests that the occurrence of instability in the tests by FHRC is related to friction instability. This mechanism appears to occur earlier than moment instability for the combination of shallow depth and high flow velocity. Those concerned to identify locations where high flood flows could be a threat to human life need to modify their hazard assessments accordingly.     

The changing sediment load of the Mekong River

The sediment loads of many of the world's major rivers have changed significantly in recent years due to land-use change, reservoir construction, and other human impacts on their drainage basins. For many rivers, the loads have decreased, whereas for others, they have increased. Such changes can have important implications for both the natural functioning of the system as well as for human exploitation of the river system. This paper considers the evidence for recent changes in the sediment load of the Mekong River. The available data have a number of limitations in terms of both sampling frequency and the period of coverage, but they have been processed to provide a basis for considering the changes in the sediment load of the river over the period extending from the early 1960s to 2002. Although there is evidence of increasing loads at some measuring stations, the overall trends show little evidence of major changes, and the system provides evidence of buffering through storage. As of 2002, the construction of major dams on the headwaters in China appears to have had little impact on the sediment load, although as further larger dams are commissioned, the sediment load of the Mekong can be expected to decrease.     

Evaluation of post-Katrina flooded soils for contaminants and toxicity to the soil invertebrates Eisenia fetida and Caenorhabditis elegans

This research evaluated soil samples from a New Orleans neighborhood in the Chalmette, Saint Bernard Parish, that had been inundated by flooding associated with Hurricane Katrina. The goal was to determine if ecological risks persisted from flood waters that had come in contact with hazardous surface chemicals before inundating this low-lying neighborhood for a prolonged period. Research objectives were to establish the presence or absence of volatile organic and heavy metal contaminants, and then asses the toxicity of this soil to Eisenia fetida in a soil exposure assay and Caenorhabditis elegans in a simulated porewater exposure assay. Soil analysis revealed detectable levels of metals and organics in the surface soil at each location. No contaminant was detected in concentrations above human health screening values. Chromium and mercury were detected at levels in excess of typical ecological risk values. Soil extracts revealed concentrations of nitrate, sulfate, and chloride above those from an unflooded background sample. Toxicity testing resulted in no acute effects to either test species, but did show bioaccumulation of arsenic, cadmium, and lead in E. fetida exposed to several samples. The combination of mercury and sulfate provide the potential for mercury methylation should flooding and prolonged inundation occur again.     

Degradability of ethylenediaminedisuccinic acid (EDDS) in metal contaminated soils: implications for its use soil remediation

Previous research has identified ethylenediaminedisuccinate (EDDS) as a promising biodegradable alternative for persistent compounds such as EDTA for application in soil washing or enhanced phytoextraction of heavy metals. This study examines heavy metal mobilization in three polluted soils varying in soil composition, with specific attention for competitive behaviour for complexation between the various metals and major elements, such as Al, Fe, Mn, Ca and Mg. In addition, amendment biodegradability was compared between the different soil types. The selected soils included a moderately contaminated calcareous clayey soil, a dredged sediment derived surface soil with similar soil characteristics yet more heavily polluted with Cd, Cr and Zn, and a sandy soil moderately contaminated by historical smelter activity (atmospheric deposition). Biodegradability of EDDS in the three soils varied distinctly. This was mainly expressed in the duration of the lag phase prior to metal complex degradation, and not so much in the half life when degradation effectively did set in. Differences in the lag phase were attributed to differences in soil pollution. However, EDDS was fully degraded within a period of 54 d in all soils regardless of initial delay. Assessment of the cation mobilisation patterns in the three soils under study revealed that mainly Ca, Fe and Al can reduce effectiveness of heavy metal mobilisation by competition for complexation.     

Enhancement of the CO(2) retention capacity of X zeolites by Na- and Cs-treatments

Adsorption of carbon dioxide on alkaline modified X zeolites was investigated by temperature programmed desorption (TPD) analysis of these materials previously saturated with CO(2) at 50, 100 and 200 degrees C. Parent X zeolite (in its sodium form) was treated with different sodium and cesium aqueous solutions, using both carbonates and hydroxides as precursors. The resulting materials were characterised by nitrogen physisorption, XRD, and NH(3)-TPD, in order to determine their morphological, crystallographic and chemical properties. Slight desilication phenomena were observed using hydroxides as precursors, whereas the treatment with Cs salts lead to higher crystallinity losses. Several successive adsorption-desorption cycles were carried out in order to check the regenerability of the adsorbents. Cesium-treated zeolites present higher carbon dioxide retention capacities than the sodium treated and than the parent material. When working with these Cs-modified materials, the desorption takes place mainly at temperatures between 250 and 400 degrees C, results of great practical interest, since it allows the use these kinds of materials for adsorption-desorption cycles. The evolution of the retention capacity with temperature is also markedly more positive for Cs-treated zeolite, especially when carbonate is used as the precursor. These materials maintain high retention capacities at 100 degrees C (10mg g(-1)) and even at 200 degrees C (3mg g(-1)), temperatures at which the most of the adsorbents are inactive.     

Combined photo-Fenton and biological oxidation for pesticide degradation: effect of photo-treated intermediates on biodegradation kinetics

Biodegradability of a partially photo-oxidized pesticide mixture is demonstrated and the effect of photo-Fenton treatment time on growth and substrate consumption of the bacteria Pseudomonas putida CECT 324 is shown. Four commercial pesticides, laition, metasystox, sevnol and ultracid, usually employed in citric orchards in eastern Spain, were chosen for these experiments. The active ingredients are, respectively, dimethoate, oxydemeton-methyl, carbaryl and methidathion. Judging by biomass measurements, dissolved organic carbon measurements and biodegradation efficiency, it may be concluded that 90min相似文献   

Traffic and catalytic converter - related atmospheric contamination in the metropolitan region of the city of Rio de Janeiro, Brazil

In this work, 24-h PM10 samples were collected in Rio de Janeiro, Brazil, and analysed for trace elements (Cd, Ce, Cu, La, Mo, Ni, Pb, Pd, Rh, Sb and Sn). The sampling was carried out at five locations (Bonsucesso; Centro, downtown city; Copacabana; Nova Igua?u and Sumaré) with different traffic densities and anthropogenic activities. An analytical method based on the EPA method for the determination of trace elements in airborne particulate matter (PM), using ultrasonic-assisted extraction and inductively coupled plasma mass spectrometry (ICP-MS) was applied. Our results suggest that vehicular traffic is the most important source of environmental pollution at the studied sites. The presence of Mo, Pd and Rh in the analysed filters reflects an additional source of pollution caused by the erosion and deterioration of automotive catalytic converters.     

Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

Heavy metals effects on proteolytic system in sunflower leaves

Plant proteolytic system includes proteases, mainly localized inside the organelles, and the ubiquitin-proteasome pathway in both, the cytoplasm and the nucleus. It was recently demonstrated that under severe Cd stress sunflower (Helianthus annuus L.) proteasome activity is reduced and this results in accumulation of oxidized proteins. In order to test if under other heavy metal stresses sunflower proteolytic system undergoes similar changes, an hydroponic experiment was carried out. Ten days old sunflower plants were transferred to hydroponic culture solutions devoid (control) or containing 100 microM of AlCl(3), CoCl(2), CuCl(2), CrCl(3), HgCl(2), NiCl(2), PbCl(2) or ZnCl(2) and analyzed for protein oxidative damage and proteolytic activities. After 4 days of metal treatment, only Co(2+), Cu(2+), Hg(2+), and Ni(2+) were found to increase carbonyl groups content. Except for Al(3+) and Zn(2+), all metals tested significantly reduced all proteasome activities (chymotrypsin-like, trypsin-like and PGPH) and acid and neutral proteases activities. The effect on basic proteases was more variable. Abundance of 20S protein after metal treatments was similar to that obtained for control samples. Co(2+), Cu(2+), Hg(2+), Ni(2+), Cr(3+), and Pb(2+) induced accumulation of ubiquitin conjugated proteins. It is concluded that heavy metal effects on proteolytic system cannot be generalized; however, impairment of proteasome functionality and decreased proteases activities seem to be a common feature involved in metal toxicity to plants.