Evaluation of simple microbiol tests for detection of fecal coliforms directly at 44.5 degrees C

Simple microbial test comprising H₂S paper strip test,presence-absence (PA) test, and fluorogenic brila broth (BB)test performed directly at 44.5 °C were evaluated andcompared with the standard most probable number (MPN) method fordetection of fecal coliforms in 173 drinking water sources. BBand PA test were comparable with standard MPN method, whereas,poor compliance was noted for H₂S test. PA test whencompared with standard MPN test only 15%; disagreement wasdetected, whereas, highest disagreement of 40%; was observed incase of H₂S test. BB test was found to be highly sensitiveas only 7.8% disagreement with that of standard MPN test wasfound. Three hundred cultures obtained from positive tests wereidentified in order to evaluate the specificities of test usedin detection of fecal indicator Escherichia coli. BB testwas also found highly specific in detection of indicatororganism as compared to PA and H₂S test. Among theorganisms isolated from BB test 84.4%; of them were identifiedas E. coli as compared to 43.4 and 33.3 in PA and H₂Stest, respectively. The low incidence of recovery of E.coli (18.1%) for the standard MPN method places doubt on thevalidity of its application in tropical areas. The result ofthis investigation suggest that BB performed directly at 44.5 °C could be suitable cost effective test to assess themicrobiological quality of drinking water in India and other tropical countries.     

Fish as an indicator of aquatic environment: Multielemental neutron activation analysis of nutrient and pollutant elements in fish from Indian coastal areas

Fish is the main food in coastal areas and its analysis for toxic metals has been used as an indicator of the pollution status of the aquatic environment. Several different fish species from the three Indian coasts, Visakhapatnam in the east, Mumbai in the west and Mangalore in the south west and also inland freshwater fish from Nagpur in the central region for comparison were analyzed for up to 20 elements (As, Au, Ba, Br, Cl, Co, Cr, Cu, Fe, Hg, K, Mn, Na, P, Rb, Sb, Sc, Se, Sr, Zn) by instrumental neutron activation analysis (INAA). Dried fish samples in powdered form were irradiated with thermal neutrons in a nuclear reactor followed by high resolution gamma ray spectrometry at different intervals. Several Reference Materials (RMs) of biological origin were analyzed for quality assurance and data validation. Elemental contents in different fish species vary in a wide range depending on the species, its size, location, and aquatic environment. Fish from Mangalore showed highest mean contents of Cr (14.8?±?29.9?µg?g^?1), Cu (1005?±?643?µg?g^?1) and Sb (849?±?888?ng?g^?1) whereas those from Mumbai exhibited highest Hg (2066?±?2146?ng?g^?1) and P (20.3?±?4.63?µg?g^?1) but lowest Cu (6.30?±?3.10?µg?g^?1) contents. Fish from all the regions showed significant amounts of nutrient elements such as Na, K, P, Mn, Fe, Se and Zn as well as some pollutant elements (Br, Cr, Sb, Hg). No regularity in variation of elemental contents with the size was observed. Prawn (Panaeus latisulcatus), a popular fish species from four different regions showed wide variation in elemental contents of Cr, Mn, Fe, Zn, Se, P including toxic pollutants, Sb and Hg. An attempt has been made to calculate daily dietary intake (DDI) for some nutrient elements from Indian fish. Elemental data for Cr, Cu, Fe, Hg, Se, and Zn have been compared with those from other fish exporting countries.     

A microscopic investigation of machining behavior in μED-milling process

The discussion presented in this work is about evaluation of physical behavior of μED-milling process based on channel shape, form and surface quality. μED-milling process is gaining lot of interest in recent times in micro manufacturing to generate complex shapes. Tool rotation and traverse which are not an inherent part of EDM process become important for μED-milling where it significantly influence the molten metal flow, debris flushing and redeposition. The effect of tool rotation not only disturbs the plasma but also affects the final shape and form of channel. Using scanning electron micrographs of μ-channel at different instant and conditions of machining, the physical nature of the process is understood and the results are presented. This study will provide a better understanding of the working phenomenon of μED-milling process.     

Characterization and optimization of conditions for biodegradation of sella-rice mill effluent

The sella-rice mill effluent is a major environmental pollutant requiring proper treatment before disposal. The present study has been conducted to isolate and characterize micro-organisms capable of growing on sella-rice effluent and to optimize conditions for its rapid bioremediation. Using three different types of media (LB, YEPDA and PDA), a total of 139 isolates were isolated from effluent samples collected from three different locations. Out of these, 45 isolates were found to utilize starch on starch medium, eight isolates showing high efficiency. For the optimization of conditions for maximum utilization of starch by selected isolates, parameters such as effect of addition of carbon and nitrogen sources, effect of growth factors, temperature and pH were studied. Maximum growth (absorbance of 2.10) and starch-utilization (varying in the range of 2.33 to 3.62) was observed on starch medium supplemented with peptone and yeast extract at 30 degrees C with a pH of 6.0. These bacterial isolates also reduced the amount of starch (80.10%), BOD (64.24%) and COD (75.0%) of sella-rice mill effluent after 15 days of incubation. On the basis of morphological and biochemical characteristics, the selected isolates were found to belong to the genera Lactobacillus and Micrococcus.     

Response in germination and seedling growth in Phaseolus mungo under salt and drought stress

The effect of salt and drought stress at the water potentials of-2, -4,-6and -8 bars induced by NaCl and PEG 6000 (Polyethylene glycol 6000) each, on germination and early seedling growth, were investigated for two varieties (PU-19 and Type-9). Electrical conductivity (EC) value of the NaCl solutions were 4.5, 8.8, 12.7 and 16.3 dS m(-1). Germination percentage, root and shoot length, and seedling fresh and dry weight were measured in the study. The objective was to determine genotypic differences among P. mungo varieties in terms of salt and drought stress and to determine factors (salt toxicity or osmotic stress due to PEG) inhibiting seed germination. The germination results revealed that the genotypes significantly differed for salt and drought stress. PU-19 appeared to be more tolerant to salt and drought stress comparable to var Type-9. Both NaCl and PEG inhibited germination and seedling growth in both the varieties, but the effects of NaCI compared to PEG was less on germination and seedling growth. All varieties were able to germinate at all NaCl levels without significant decrease in germination, while a drastic decrease in germination was recorded at -6 and -8 bars of PEG. It was concluded that inhibition in germination at equivalent water potential of NaCl and PEG was mainly due to an osmotic effect rather than salt toxicity.     

Effect of electrostatic precipitator on exhaust emissions in biodiesel fuelled CI engine

Environmental Science and Pollution Research - The exhaust emissions from the compression ignition engines are harmful to both human beings and the environment. After-treatment devices placed in...     

Influence of short-term irrigation of textile mill wastewater on the growth of chickpea cultivars

The effect of textile mill wastewater on germination, delay index, physiological growth parameters, and plant pigments of two cultivars of chickpea was studied. The aim of this study was to evaluate the suitability of textile mill wastewater (treated and untreated) at different concentrations (0, 6.25, 12.5, 25, 50, 75, and 100%) for irrigational purposes. The textile effluent did not show any inhibitory effect on seed germination at a lower concentration (6.25%). The other reported plant parameters (delay index, root length, shoot length, dry weight, chlorophyll, and carotenoid) also followed a similar trend. Seeds germinated in 100% effluents but did not survive for longer periods. It has also been concluded that the effect of the textile effluent is cultivar-specific, and due care should be taken before using the textile mill wastewater for irrigation purposes.     

A model to estimate the methane generation rate constant in sanitary landfills using fuzzy synthetic evaluation.

This paper presents a model using fuzzy synthetic evaluation to estimate the methane generation rate constant, k, for landfills. Four major parameters, precipitation, temperature, waste composition and landfill depth were used as inputs to the model. Whereas, these parameters are known to impact the methane generation, mathematical relationships between them and the methane generation rate constant required to estimate methane generation in landfills, are not known. In addition, the spatial variations of k within a landfill combined with the necessity of site-specific information to estimate its value, makes k one of the most elusive parameters in the accurate prediction of methane generation within a landfill. In this paper, a fuzzy technique was used to develop a model to predict the methane generation rate constant. The model was calibrated and verified using k values from 42 locations. Data from 10 sites were used to calibrate the model and the rest were used to verify it. The model predictions are reasonably accurate. A sensitivity analysis was also conducted to investigate the effect of uncertainty in the input parameters on the generation rate constant.     

Fluoride contamination in drinking water in rural habitations of Northern Rajasthan, India

This study was carried out to assess the fluoride concentration in groundwater in some villages of northern Rajasthan, India, where groundwater is the main source of drinking water. Water samples collected form deep aquifer based hand-pumps were analysed for fluoride content. Fluoride in presently studied sites was recorded in the ranges of 4.78 and 1.01 mg/l. The average fluoride concentration for this region was recorded 2.82 mg/l. As per the desirable and maximum permissible limit for fluoride in drinking water, determined by WHO or by Bureau of Indian Standards, the groundwater of about 95 of the studied sites is unfit for drinking purposes. Due to the higher fluoride level in drinking water several cases of dental and skeletal fluorosis have appeared at alarming rate in this region. The middle and eastern parts of the Hanumangarh, a northern most district of the state, can be classified as higher risk area for fluorosis; due to relatively high concentrations of fluoride (3-4 mg/l) in groundwater of this region. After evaluating the data of this study it is concluded that there is an instant need to take ameliorative steps in this region to prevent the population from fluorosis.