Occurrence of tar balls on the beaches of Fernando de Noronha Island,South Equatorial Atlantic

This work reports on the widespread occurrence of tar balls on a pebble beach of Sueste Bay on Fernando de Noronha Island, a Brazilian national marine park and a preserve in the South Equatorial Atlantic. Environmental regulations preclude regular visitors to the Sueste Bay beach, and the bay is a pristine area without any possible or potential sources of petroleum in the coastal zone. In this work, these tar balls were observed for the first time as they occurred as envelopes around beach pebbles. They are black in color, very hard, have a shell and coral fragment armor, and range in average size from 2 to 6 cm. The shape of the majority of the tar balls is spherical, but some can also be flattened ellipsoids. The polycyclic aromatic hydrocarbon analyses of the collected samples revealed the characteristics of a strongly weathered material, where only the most persistent compounds were detected: chrysene, benzo(b,k)fluoranthene, dibenzo(a,h)antracene and benzo(a)pyrene.     

Biogeochemical characterization of surface waters in the Aljustrel mining area (South Portugal)

Aljustrel mining area (South Portugal) is a part of the Iberian Pyrite Belt and encloses six sulfide mineral masses. This mine is classified of high environmental risk due to the large tailings’ volume and acid mine drainage (AMD)-affected waters generated by sulfides’ oxidation. The use of biological indicators (e.g., diatoms) revealed to be an important tool to address the degree of AMD contamination in waters. Multivariate analysis has been used as a relevant approach for the characterization of AMD processes. Cluster analysis was used to integrate the significant amount and diversity of variables (physicochemical and biological), discriminating the different types of waters, characterized by the high complexity occurring in this region. The distinction of two main marked phenomena was achieved: (1) the circumneutral-Na-Cl water type (sites DA, PF, BX, BF, RO, CB), expressing the geological contributions of the Cenozoic sediments of Sado river basin, with high diatom diversity (predominating brackish diatoms as Entomoneis alata); and (2) the acid–metal-sulfated water type (sites BM, JU, RJ, AA, MR, BE, PC, AF), reflecting both the AMD contamination and the dissolution of minerals (e.g., silicates) from the hosting rocks, potentiated by the extremely low pH. This last group of sites showed lower diatom diversity but with typical diatoms from acid- and metal-contaminated waters (e.g., Pinnularia aljustrelica). In addition to these two water types, this hierarchical classification method also allowed to distinguish individual cases in subclusters, for example, treated dams (DC, DD), with alkaline substances (lime/limestone), that changed the physicochemical dynamics of the contaminated waters.

     

Characterisation of agroindustrial solid residues as biofuels and potential application in thermochemical processes

In the present work, selected agroindustrial solid residues from Brazil – biosolids from meat processing wastewater treatment and mixture of sawdust with these biosolids; residues from apple and orange juice industries; sugarcane bagasse; açaí kernels (Euterpe oleracea) and rice husk – were characterised as solid fuels and an evaluation of their properties, including proximate and ultimate composition, energy content, thermal behaviour, composition and fusibility of the ashes was performed. The lower heating value of the biomasses ranged from 14.31 MJ kg^?1 to 29.14 MJ kg^?1, on a dry and ash free basis (daf), all presenting high volatile matter content, varying between 70.57 wt.% and 85.36 wt.% (daf) what improves the thermochemical conversion of the solids. The fouling and slagging tendency of the ashes was predicted based on the fuel ash composition and on the ash fusibility correlations proposed in the literature, which is important to the project and operation of biomass conversion systems. The potential for application of the Brazilian agroindustrial solid residues studied as alternative energy sources in thermochemical processes has been identified, especially concerning direct combustion for steam generation.     

Combinatory chemical and biological approaches to investigate metal elements in agricultural runoff water

As part of a project studying the interactions between farming practices, soil erosion processes, and fate of agricultural pollutants into runoff waters, we conducted a pilot study to investigate the relationship between metal contents and metallothionein-2A (MT-2A) as a bioindicator of metal exposure. Runoff water samples were collected between May and November 1999 at the point of outlet of an elementary watershed located in the Paris basin. Selected metals (Al, As, Cd, Cr, Cu, Pb, Hg, Ni, and Zn) were analyzed using conventional techniques. In parallel, human T cells were exposed to water samples for 6 and 18 h and then cell viability and MT-2A gene expression were measured. Results show that among the 10 water samples tested, Al and Zn predominate (highest values = 4.9 and 2.6 microM, respectively), while other metals were below the microM level. Five out of 10 samples induced MT-2A gene expression (30-80% increase at 18 h) as compared with the control. When comparing MT-2A induction profile with metals contents, no obvious correlation was found, suggesting that additional components or parameters are involved. Finally, there was an apparent inverse relationship between Ca concentration and MT-2A gene induction. Although still preliminary, in the absence of longer monitoring, this study shows that MT-2A gene expression is a useful tool to complement chemical analysis in assessing metal elements in water. These combinatory approaches will be pursued and integrated in an ongoing watershed field research project.     

Surveillance programme on dioxin levels in ambient air sites in Catalonia (Spain)

As part of a survey programme conducted by the Environment Department of the Autonomous Government of Catalonia in collaboration with the Spanish Council for Scientific Research (CSIC), dioxin concentrations in ambient air were measured in the four provinces of Catalonia (Spain). The study was also performed with the intention of providing data as a basis for future monitoring and evaluation of temporal trends in ambient air. Thus, 91 samples were collected in 25 different sites (rural, urban, suburban and industrial) between 1994 and 2000. The levels revealed a variable content of PCDDs/PCDFs depending both on the area and the contamination source. In particular, industrial areas presented levels ranging from 18 to 954 fg I-TEQ/m3. However, findings in urban and suburban sites varied between 13 and 357 fg I-TEQ/m3. As expected, the lowest levels were found in rural areas with levels between 5 and 125 fg I-TEQ/m3.     

Occupational safety and health in Spain

Occupational Health and Safety in Spain has improved considerably over the last decade, most likely due to a new concept where an overall concept of safety culture is defined. Important changes in industrial safety, hygiene, and psychosocial factors present an optimistic panorama for the future of Spain. Despite this general improvement, according to the European Convergence Program, Spanish statistics still offer far from good safety results. In fact, according to 1997 official statistics, Spain had the highest incidence rate for nonfatal occupational accidents of all European Union (EU) countries, and occupied third place for fatal accidents. This paper summarizes the organizational structure of the Spanish National System of Health & Safety at Work, its effective health and safety laws, and statistics on the Spanish work environment obtained from III Spanish National Survey on Work Conditions (1997). The researchers hope that the findings of this work will have an impact on Spanish industry that will subsequently bring about improvements in work conditions and develop assessment and intervention models in occupational health and safety, from a theoretical position integrating environmental, human, and organizational factors.     

Regulating insect resistance management: the case of non-Bt corn refuges in the US

In this paper, we analyze the insect resistance management (IRM) plan put in place by the US Environmental Protection Agency (EPA) to delay the evolution of resistance to Bt corn in natural populations of the European corn borer, Ostrinia nubilalis Hübner. This IRM plan is the most impressive mandatory IRM system ever developed. It forms a coherent whole and includes mandatory refuges, actions to increase growers' compliance and a program for monitoring the evolution of resistance. However, our analysis suggests that two components of this IRM plan are not entirely satisfactory: growers' compliance and monitoring of the evolution of resistance. Moreover, the implementation of these two components of IRM has been required of the registrants, whose incentives for IRM are probably lower than the social optimum. Our analysis suggests that alternatives to the IRM plan currently in place could improve these two components.     

Comparison of atrazine losses in three small headwater catchments

Understanding the processes causing herbicide transport to surface waters is crucial to determine mitigation options to reduce these losses. To this end, we investigated the atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) transport in three agricultural catchments (1.1-2.1 km2) in the watershed of Lake "Greifensee" (Switzerland). In 1999, atrazine application data were recorded for all three catchments. Time proportional samples were taken at a high temporal resolution at the catchment outlets. Extremely wet conditions caused large relative losses from the catchments, ranging between 0.6 and 3.5% of the amount applied. Most of the atrazine load was due to event-driven diffuse losses from the fields. Farmyard runoff contributed less but caused the highest concentrations (up to 31 microg L(-1)) in the brooks. The maximum concentrations due to diffuse losses varied between 1.2 and 8.2 microg L(-1) among the catchments. Despite different absolute concentration levels, the concentration time-series were very similar. It seems that the travel-times within the catchments were mainly controlled by the rainfall pattern with little influence of the catchment properties. These properties, however, caused the relative losses to vary by a factor of 6 between the catchments. This variability could be partly explained by differences in the connectivity of the fields to the brooks and by their hydrological soil properties. A comparison of the losses from the three catchments with those from the entire watershed of Lake Greifensee demonstrated that they were representative for the larger area. Hence, the study results provide a good data set to evaluate distributed models predicting herbicide losses.     

一维可燃气云燃烧与爆炸的数值模拟

碳氢燃料在空气中形成的可燃气云，点火后容易从燃烧发展为爆轰。本文分别用均匀能量释放模型与能量波模型模拟了可燃气云的能量释放；用高精度、高分辨率的ＴＶＤ格式对有限能量释放速率的一维可燃气云的流体力学守恒方程进行了数值求解，给出了流场压力分布曲线，讨论了两种能量释放模型中影响能量释放速率的主要因素。     

Participatory Development of No-tillage Systems without Herbicides for Family Farming: The Experience of the Center-South Region of Paraná

It is currently estimated that 40 million hectares worldwide are cultivated through no-tillage systems (Derpsh, 1998). Small family farms account for less than 50,000ha, half of them located in South America's Southern Cone (Wall, 1998). Many hypotheses have been offered to explain why so few small farmers have adapted to this method. The most simplistic ones relate this limited adoption to small farmers' traditionalism and to their rejection of innovation. Others point to the low technological development of animal-drawn equipment needed for this technology or the low educational level of family farmers.Results of work done in the Center-South of Paraná, Southern Brazil, by AS-PTA¹ in partnership with the region's Forum of Family Farmers Organizations, challenge these hypotheses and draw attention to the need for new approaches and processes of research and extension if the goal is to disseminate and implement appropriate no-tillage systems among family farmers. One requisite is to lower production costs of this method through elimination of herbicides and using green manure and cover crops that shift the crop-weed balance in favor of crops.