Summary of am APCA International Specialty Conference

Ozone continues to be one of the most important air pollution problems in the United States. While significant progress has been made, certain areas of the country still experience unhealthy levels of ozone and are unlikely to achieve current primary standards by 1988. With the prospect of an influx of millions of additional people, and their cars, into these areas by the year 2000, the problem of oxidant regulation and control becomes even greater. From this realization, the Effects Division of the Air Pollution Control Association conceived this conference topic. The summary that follows highlights key issues and findings from the conference held in November 1984 in Houston, Texas. The transactions of the conference will be available from APCA headquarters in the near future.     

Liquid balance monitoring inside conventional,Retrofit, and bio-reactor landfill cells

The Outer Loop landfill bioreactor (OLLB) in Louisville, KY, USA has been the site of a study to evaluate long-term bioreactor performance at a full-scale operational landfill. Three types of landfill units were studied including a conventional landfill (Control cell), a new landfill area that had an air addition and recirculation piping network installed as waste was being placed (As-Built cell), and a conventional landfill that was modified to allow for liquids recirculation (Retrofit cell). During the monitoring period, the Retrofit, Control, and As-Built cells received 48, 14, and 213 L Mg^?1 (liters of liquids per metric ton of waste), respectively. The leachate collection system yielded 60, 57 and 198 L Mg^?1 from the Retrofit, Control, and As-Built cells, respectively. The head on liner in all cells was below regulatory limits. In the Control and As-Built cells, leachate head on liner decreased once waste placement stopped. The measured moisture content of the waste samples was consistent with that calculated from the estimate of accumulated liquid by the liquid balance. Additionally, measurements on excavated solid waste samples revealed large spatial variability in waste moisture content. The degree of saturation in the Control cells decreased from 85% to 75%. The degree of saturation increased from 82% to 83% due to liquids addition in the Retrofit cells and decreased back to 80% once liquid addition stopped. In the As-Built cells, the degree of saturation increased from 87% to 97% during filling activities and then started to decrease soon after filling activities stopped to reach 92% at the end of the monitoring period. The measured leachate generation rates were used to estimate an in-place saturated hydraulic conductivity of the MSW in the range of 10^?8 to 10^?7 m s^?1 which is lower than previous reports. In the Control and Retrofit cells, the net loss in liquids, 43 and 12 L Mg^?1, respectively, was similar to the measured settlement of 15% and 5–8% strain, respectively (Abichou et al., 2013). The increase in net liquid volume in the As-Built cells indicates that the 37% (average) measured settlement strain in these cells cannot be due to consolidation as the waste mass did not lose any moisture but rather suggests that settlement was attributable to lubrication of waste particle contacts, softening of flexible porous materials, and additional biological degradation.     

Sizing and Costing of Electrostatic Precipitators

This is the second of a two-part article that reviews electrostatic precipitation theory, presents size estimating methods, and gives costing procedures for a variety of electrostatic precipitator (ESP) types and sizes. Part I of the article, which appeared in the April 1988 issue of JAPCA, discussed theory and sizing; this part presents costing. Information is given for estimating total capital investment including separate costs for the bare ESP (five types) and auxiliaries. Factors are given for installation and for indirect costs. Direct and indirect annual costs are discussed. An example problem is given.     

Bioaugmentation with butane-utilizing microorganisms to promote in situ cometabolic treatment of 1,1,1-trichloroethane and 1,1-dichloroethene

A field study was performed to evaluate the potential for in-situ aerobic cometabolism of 1,1,1-trichloroethane (1,1,1-TCA) through bioaugmentation with a butane enrichment culture containing predominantly two Rhodococcus sp. strains named 179BP and 183BP that could cometabolize 1,1,1-TCA and 1,1-dicholoroethene (1,1-DCE). Batch tests indicated that 1,1-DCE was more rapidly transformed than 1,1,1-TCA by both strains with 183BP being the most effective organism. This second in a series of bioaugmentation field studies was conducted in the saturated zone at the Moffett Field In Situ Test Facility in California. In the previous test, bioaugmentation with an enrichment culture containing the 183BP strain achieved short term in situ treatment of 1,1-DCE, 1,1,1-TCA, and 1,1-dichloroethane (1,1-DCA). However, transformation activity towards 1,1,1-TCA was lost over the course of the study. The goal of this second study was to determine if more effective and long-term treatment of 1,1,1-TCA could be achieved through bioaugmentation with a highly enriched culture containing 179BP and 183BP strains. Upon bioaugmentation and continuous addition of butane and dissolved oxygen and or hydrogen peroxide as sources of dissolved oxygen, about 70% removal of 1,1,1-TCA was initially achieved. 1,1-DCE that was present as a trace contaminant was also effectively removed ( 80%). No removal of 1,1,1-TCA resulted in a control test leg that was not bioaugmented, although butane and oxygen consumption by the indigenous populations was similar to that in the bioaugmented test leg. However, with prolonged treatment, removal of 1,1,1-TCA in the bioaugmented leg decreased to about 50 to 60%. Hydrogen pexoxide (H₂O₂) injection increased dissolved oxygen concentration, thus permitting more butane addition into the test zone, but more effective 1,1,1-TCA treatment did not result. The results showed bioaugmentation with the enrichment cultures was effective in enhancing the cometabolic treatment of 1,1,1-TCA and low concentrations of 1,1-DCE over the entire period of the 50-day test. Compared to the first season of testing, cometabolic treatment of 1,1,1-TCA was not lost. The better performance achieved in the second season of testing may be attributed to less 1,1-DCE transformation product toxicity, more effective addition of butane, and bioaugmentation with the highly enriched dual culture.     

An ecological perspective on theory, methods, and analysis in environmental psychology: Advances and challenges

Over the course of environmental psychology's brief history, there has been an interest in ecologically oriented approaches to theory and research. Based on this work, this paper identifies a set of six principles of ecological analysis that present theoretical, methodological, and analytic challenges to future research in environmental psychology. These challenges include the theoretical treatment of the multiple contexts within which human experience and behavior occurs, the need for sampling both persons and environments, the modeling of moderating and mediating processes, the issue of self-selection into and out of different settings, the necessity of considering temporal factors in environmental research, reliance on single methods (e.g., verbal report) in data generation, cross-sectional and longitudinal research designs, and the need for greater use of statistical techniques developed for contextual (multi-level) research. These issues are discussed and illustrated using recent developments in environmentally oriented research. The paper concludes with a set of 11 recommendations for the future.     

Indicators of perceived naturalness as drivers of landscape preference

The concept of naturalness is one of the more studied concepts in landscape preference research and describes how close a landscape is to a perceived natural state. In this study we explored the relationship between landscape preference and three landscape indicators of naturalness (level of succession, number of woodland patches and shape index of edges). We used computer-generated visualisations of a hypothetical landscape containing pasture and broadleaved woodland. In the landscape simulations we altered the values of the naturalness indicators between the levels of low, medium and high, creating 27 different visualisations. The survey was distributed as an on-line survey in seven different languages and obtained 703 respondents. The study showed a strong relationship with preference for both the level of succession and number of woodland patches, and a weaker relationship with shape index of edges. The two demographic factors which were shown to contribute most to the formation of preference were gender and having a landscape related profession. The results suggest that the selected indicators are more important drivers of preference than demographic factors.     

Bioenergy Sustainability in China: Potential and Impacts

The sustainability implications of bioenergy development strategies are large and complex. Unlike conventional agriculture, bioenergy production provides an opportunity to design systems for improving eco-environmental services. Different places have different goals and solutions for bioenergy development, but they all should adhere to the sustainability requirements of the environment, economy, and society. This article serves as a brief overview of China’s bioenergy development and as an introduction to this special issue on the impacts of bioenergy development in China. The eleven articles in this special issue present a range of perspectives and scenario analyses on bioenergy production and its impacts as well as potential barriers to its development. Five general themes are covered: status and goals, biomass resources, energy plants, environmental impacts, and economic and social impacts. The potential for bioenergy production in China is huge, particularly in the central north and northwest. China plans to develop a bioenergy capacity of 30GW by 2020. However, realization of this goal will require breakthroughs in bioenergy landscape design, energy plant biotechnology, legislation, incentive policy, and conversion facilities. Our analyses suggest that (1) the linkage between bioenergy, environment, and economy are often circular rather than linear in nature; (2) sustainability is a core concept in bioenergy design and the ultimate goal of bioenergy development; and (3) each bioenergy development scheme must be region-specific and designed to solve local environmental and agricultural problems.     

Evaluation of vacuum filter sock surface sample collection method for Bacillus spores from porous and non-porous surfaces

Vacuum filter socks were evaluated for recovery efficiency of powdered Bacillus atrophaeus spores from two non-porous surfaces, stainless steel and painted wallboard and two porous surfaces, carpet and bare concrete. Two surface coupons were positioned side-by-side and seeded with aerosolized Bacillus atrophaeus spores. One of the surfaces, a stainless steel reference coupon, was sized to fit into a sample vial for direct spore removal, while the other surface, a sample surface coupon, was sized for a vacuum collection application. Deposited spore material was directly removed from the reference coupon surface and cultured for enumeration of colony forming units (CFU), while deposited spore material was collected from the sample coupon using the vacuum filter sock method, extracted by sonication and cultured for enumeration. Recovery efficiency, which is a measure of overall transfer effectiveness from the surface to culture, was calculated as the number of CFU enumerated from the filter sock sample per unit area relative to the number of CFU enumerated from the co-located reference coupon per unit area. The observed mean filter sock recovery efficiency from stainless steel was 0.29 (SD = 0.14, n = 36), from painted wallboard was 0.25 (SD = 0.15, n = 36), from carpet was 0.28 (SD = 0.13, n = 40) and from bare concrete was 0.19 (SD = 0.14, n = 44). Vacuum filter sock recovery quantitative limits of detection were estimated at 105 CFU m(-2) from stainless steel and carpet, 120 CFU m(-2) from painted wallboard and 160 CFU m(-2) from bare concrete. The method recovery efficiency and limits of detection established in this work provide useful guidance for the planning of incident response environmental sampling for biological agents such as Bacillus anthracis.     

Microbial aspects of the interaction between soil depth and biodegradation of the herbicide isoproturon

Factors controlling change in biodegradation rate of the pesticide isoproturon with soil depth were investigated in a field with sandy-loam soil. Soil was sampled at five depths between 0-10 and 70-80 cm. Degradation rate declined progressively down the soil profile, with degradation slower, and relative differences in degradation rate between soil depths greater, in intact cores relative to sieved soil. Neither the maximum rate of degradation, or sorption, changed with soil depth, indicating that there was no variation in bioavailability. Differences in degradation rate between soil depths were not associated with the starting population size of catabolic organisms or the number of catabolic organisms proliferating following 100% degradation. Decreasing degradation rates with soil depth were associated with an increase in the length of the lag phase prior to exponential degradation, suggesting the time required for adaptation within communities controlled degradation rates. 16S rRNA PCR denaturing gradient gel electrophoresis showed that degradation in sub-soil between 40-50 and 70-80 cm depths was associated with proliferation of the same strains of Sphingomonas spp.     

Assessing multiple novel tracers to improve the understanding of the contribution of agricultural farm waste to diffuse water pollution

A study was undertaken on drained and undrained 1 ha grassland lysimeters to assess the effectiveness of multiple novel tracing techniques in understanding how agricultural slurry waste moves from land to water. Artificial fluorescent particles designed to mimic the size and density of organic slurry particles were found to move off the grassland via inter-flow (surface + lateral through-flow) and drain-flow. Where both pathways were present the drains carried the greater number of particles. The results of the natural fluorescence and δ13C of water samples were inconclusive. Natural fluorescence was higher from slurry-amended lysimeters than from zero-slurry lysimeters, however, a fluorescence decay experiment suggested that no slurry signal should be present given the time between slurry application and the onset of drainage. The δ13C values of >0.7 microm and <0.7 microm material in drainage were varied and unrelated to discharge. The mean value of >0.7 microm δ13C in water from the drain-flow pathways was higher from the lysimeter which had received naturally enriched maize slurry compared to the lysimeter which received grass slurry indicating a contribution of slurry-derived material. Values of <0.7 microm δ13C from the same pathway, however, produced counter intuitive trends and may indicate that different fractions of the slurry have different δ13C values.