Effects of Preparation Parameters on Properties of Soy Protein-Based Fiberboard

The effects of manufacturing parameters on mechanical properties of medium density fibreboard (MDF) bonded with modified soy protein-based glue were studied to find an appropriate manufacture technology. Physical properties of MDF made with different amount of wax emulsion were measured. Results indicated that water repellent had no obvious influence on physical properties of soy protein-based MDF boards. The fiberboards bonded with soy protein-based glue showed stronger water resistance properties than those bonded with urea–formaldehyde (UF) resins. Furthermore, the soy protein-based MDF boards had good quality [25.2% 24 h soak thickness swell (TS), 29.9 MPa modulus of rupture (MOR), 3130 MPa modulus of elasticity (MOE)], which met requirements of Chinese national standard. Practical processing parameters were obtained by orthogonal experiment, i.e., glue content 8.0%, hot-press temperature 200 °C, and hot-press time 150 s.     

Life cycle assessment of biodiesel fuel production from waste cooking oil in Okayama City

A life cycle assessment (LCA) is performed to make clear of the actual environment impacts from conversation of waste cooking oil (WCO) to biodiesel fuel (BDF) in Okayama. A scenario analysis is carried out based on different participation rate of residents who separate WCO from general waste, corresponding to different BDF utilisation rate in transportation system. Sub scenarios complying with different gas emission standards regarding vehicles are designed as well. Afterwards, life cycle impact assessment is conducted to focus on global warming, acidification, and urban air pollution. Overall improvement of almost all kinds of life cycle inventories is significant when diesel is replaced with BDF, demonstrating that a shift from WCO-to-incineration to WCO-to-BDF is more beneficial. Under carbon neutral, compared to base scenario (S0), about 746.05 ton CO₂ emission will be reduced annually in the scenario with 100 % BDF utilisation in vehicles (S4). Meanwhile, total external cost in three environmental impacts (EI) sharply reduces by 51.90 %, showing much economic sustainability in S4. Moreover, the manufacturing cost for producing one litter WCO-to-BDF is 97.32 Yen. Sensitivity analysis shows that the gas emission standard regarding vehicles had much bigger effect on EI than BDF manufacturing process in this research.     

Industrial and urban symbiosis in Japan: Analysis of the Eco-Town program 1997–2006

Japan's Eco-Town Program spearheaded in Japan the integration of Industrial Symbiosis and Urban Symbiosis, seeking to maximise the economic and environmental benefit from close geographic proximity of industrial and urban areas, through the use of previously discarded commercial, municipal and industrial waste materials in industrial applications. The program established 26 Eco-Towns around Japan. Approximately 1.65 billion USD was invested in 61 innovative recycling projects, with an average government subsidy of 36%. In addition at least 107 other recycling facilities have been constructed without government subsidy. 14 Eco-Towns primarily contributed to improving industry's productivity, whilst 10 Eco-Towns primarily contributed to improving environmental amenity. In 16 Eco-Towns the private sector was the most important actor supporting local government in the realisation of the Eco-Town, whilst in 9 Eco-Towns this was civil society. The availability of investment subsidies, the coming into force of ambitious recycling legislation with quantified, product-specific targets, access to the significant technological resources of the private sector, and widespread recognition of the urgency to act on environmental issues, all contributed to the success of the Eco-Town Program.     

构建现代产业体系的环保思考

在对当前国际国内环境保护大背景分析的基础上,阐述了构建现代产业体系与环境保护的关系,以及生态文明、科学发展观、可持续发展战略、循环经济、清洁生产等与环境保护相关的关键词,提出构建现代产业体系,必须与环境保护体系建设同步进行,将最新的环保理念和思想纳入到现代产业体系的构建之中,并从环保政策上给与支持。     

铁炭微电解工艺处理采油废水的研究

随着采油废水产生量的逐渐增大以及排放标准的日益严格,寻找一种经济、高效的处理方法显得十分必要。采用铁炭微电解技术对冀东油田采油废水进行了处理。考察了铁屑粒径、pH值、Fe/C质量比和反应时间对COD去除率的影响并设计了正交实验,结果表明,影响微电解工艺的因素主次关系为:pH>Fe/C质量比>反应时间,在最佳条件pH=5,Fe/C质量比为7∶1,反应时间50 min下,原水COD由170 mg/L降至95.6 mg/L,去除率达43.85%,出水满足国家二级排放标准。     

膜电解法在线再生酸性蚀刻液及回收铜新技术

采用极化曲线法研究了酸性蚀刻液阴、阳极电化学行为,并构建了离子膜电解反应体系,考察了在线再生酸性蚀刻液及回收铜的效果。结果表明,阳极氧化过程发生浓差极化,存在极限电流密度,Cu＋含量越高,极限电流密度越大;阴极还原分4步反应进行,存在极限电流密度;强化溶液传质可有效提高阴、阳极极限电流密度,有利于避免电解过程中析出氯气和氢气;在线实验表明,通过监控阳极液ORP,可避免析出氯气;分步降低电流电解有利于避免析出氢气,形成致密的金属铜块;在电流为9～24A范围内分4步电解23．5h可再生酸性蚀刻液23．5L,同时电沉积回收510g铜,纯度高达99．98％。阴极电流效率达到95．2％,吨铜电耗3251kWh。电解过程中无氯气和氢气析出,无废液排放,表明膜电解法在线再生酸性蚀刻液具有良好的应用前景。     

Global fallout Pu recorded in lacustrine sediments in Lake Hongfeng, SW China

Studies on the distribution and isotope compositions of fallout Pu are important for source characterization of possible future non-fallout Pu contamination in aquatic environments, and useful for dating of recent sediments to understand the pollution history of environmental contaminants. We present the historical record of atmospheric Pu fallout reconstructed from a sediment core from Lake Hongfeng, China. The Pu activity profile was in agreement with the 137Cs profile. Inventories were 50.7 Bq m(-2) for 239+240Pu and 1586 Bq m(-2) for 137Cs. The average 240Pu/239Pu atom ratio was 0.185+/-0.009, indicating that Pu originated from global stratospheric fallout rather than from direct tropospheric or close-in fallout from the Chinese nuclear testing conducted in the 1970s. Our data suggested that Lake Hongfeng would be an ideal setting for monitoring atmospheric fallout and environmental changes in this region.     

我国环境管理模式的转变

本文通过对我国的环境管理发展历程分析后认为,我国的环境管理模式已由过去单一的管理模式转变为强化执法监督、加大投入、注重技术相互结合的综合型管理模式,在继续强化执法监督的同时,不断提高环保投入的比例和不断增加科技含量,是环境管理发展的趋势。     

Response of Ceriodaphnia dubia to ionic silver: discrepancies among model predictions, measured concentrations and mortality

Silver thiosulfate, often a waste product of photoprocessing, is less bioavailable or toxic to aquatic organisms than is ionic silver. We conducted duplicate 48-h Ceriodaphnia dubia tests in reconstituted laboratory water using treatments of 92.7 nM Ag+ with various concentrations of thiosulfate. Expected Ag+ concentrations were generated for thiosulfate treatment levels using MINEQL + chemical equilibrium modeling. Ag+ concentrations in treatments were determined using a novel silicon-based sensor. Based on predicted Ag+ and published 48-h LC50 values for C. dubia, we did not expect to observe adverse effects. Yet, 100% mortality was observed at low thiosulfate treatments, whereas > 85% and > 95% survival was observed at higher thiosulfate treatment levels, respectively. Our results indicate that biotic responses match the sensor-based Ag+ concentrations. However, there is a discrepancy between these empirical results and responses expected to occur with Ag+ concentrations as predicted by MINEQL + chemical modeling. By correlating silicon sensor data with toxicity results obtained from our laboratory, our work clearly relates a specific chemical form (Ag+) to toxicity results.     

1960年以来山西秋季连阴雨的气候特征分析

利用山西省66个测站1960-2009年秋季(9-11)月的逐日降水量,采用线性倾向估计、累积距平法、EOF及Morlct小波分析方法,系统地分析了山西秋季连阴雨的变化趋势和时空结构特征,建立了秋季连阴雨强度指数模型。结果表明:山西秋季年际区域性连阴雨次数和阴雨日数呈明显的线性减少趋势,过程雨量呈波动上升趋势,连阴雨次数的累积距平表现为"三升两降"型变化;山西秋季连阴雨的年际和年代际变化特征明显,1960-1970年代中期,有5~6年的周期变化,1990年代后期有2年的周期变化特征,年代际变化呈"波动状"变化规律;全省秋季连阴雨从南到北呈递减分布,除北部的天镇、山阴、繁峙等呈增加趋势外,各代表站表现为一致的减少趋势,南部、东南部及五台山为连阴雨多发区,大同盆地、忻州盆地、太原盆地为少发区;山西秋季连阴雨存在2~3年、8年左右的显著振荡周期。1970年代中期到1980年代中期,8年左右振荡周期的振幅最大,能量最强,是周期振荡最强的阶段。