扬州经济开发区发展循环经济的实践、对策和规划

扬州经济开发区通过国家生态工业示范园区的创建和国家循环经济试点工作,构建以工业共生、物质循环、自然和谐、宜业宜居为特征及资源节约型、环境友好型开发区。本文介绍了扬州经济开发区发展循环经济的实践情况,以“减量化、再利用、资源化”和“可持续性”原则为理念,分析了其循环经济发展存在的问题,并提出了相应对策和规划。     

鸡粪腐解过程中不同溶性腐殖质结合铜的变化

以鸡粪为材料,添加不同比例的铜锌进行腐解试验,研究了腐解过程中不同溶性腐殖质结合态铜(水溶性、氢氧化钠溶性、氢氧化钠-焦磷酸钠混合液溶性)浓度的动态变化、受锌含量的影响及其与有效铜的关系.结果表明,粪肥原样H2O-Cu(水溶性腐殖质结合态铜)占其全铜量的10.97%,在腐解过程中先上升后下降;随着粪肥中添加铜量的增加(1:1、2:1、3:1处理),H2O-Cu占其全铜的比例相应减少了(平均分别占其全铜的比例的7.10%、5.18%和3.74%);H2O-Cu随着腐解时间延长呈增加趋势;在腐解的后期(45、60d),粪肥中锌含量的增加会降低H2O-Cu含量.腐解初期粪肥原样NaOH浸提腐殖质-铜(NaOH-Cu)占其全铜量的70.87%,随腐解进行其比例大幅度下降;NaOH-Cu占其全铜的比例随着加入铜的增大而有所下降,分别为55.59%、46.04%和38.08%,且随着腐解时间延长呈下降趋势;粪肥中锌含量的增加对NaOH-Cu含量变化影响较小.粪肥原样中NaOH-Na4P2O7提取腐殖质结合态铜(NaOH-Na4P2O7-Cu)占其全铜量的24.29%,随腐解过程呈增加趋势,NaOH-Na4P2O7-Cu量随着加入铜量的增加而增加,占其全铜比例的15%～25%;粪肥中锌含量增加对NaOH-Na4P2O7-Cu有促进作用.粪肥添加铜锌后,3种浸提剂提取的可溶性腐殖质结合态铜有55%～80%分配在NaOH的溶液中,10%～30%分配在NaOH-Na4P2O7碱性混合液中,0～10%在水溶液中;随加入铜含量和锌含量的增加,NaOH-Na4P2O7-Cu平均分配比(占3种町浸提性腐殖质-Cu的比例)增加,NaOH-Cu和H2O-Cu的分配比减少.相关性分析结果表明:H2O-Cu、NaOH-Cu和NaOH-Na4P2O7-Cu之间显著正相关,它们与有效铜之间呈显著正相关关系(p<0.01).     

水中安替比林的紫外光降解研究

以波长为254 nm的紫外杀菌灯为光源,研究了水溶液中消炎镇痛药物安替比林（PZ）的光降解行为;考察了初始pH值及水中其他物质对PZ光降解的影响,探讨了PZ光解机制,并分析其降解产物及光解途径。结果表明,安替比林的光降解遵循拟一级反应动力学规律,pH值变化对光解速率基本没有影响。安替比林直接光降解占主导作用,活性氧类物种（ROS）对安替比林间接光解基本没有贡献。腐殖酸对安替比林光降解有抑制作用,而NO^-₃,HCO^-₃,Cl^-对安替比林光降解没有明显作用。GC-MS分析表明安替比林在紫外辐射下生成甲酰胺,乙酰胺,2-羟基吲哚-3-酮,2,4（1氢,3甲基）-喹唑啉二酮,1-甲基-2-羟基苯并咪唑,2-羟基苯并恶唑等一系列具有安替比林母体苯环结构的化合物,表明安替比林侧链上N—N键断裂导致其最终降解。     

表面活性剂加强动电技术去除污泥中铜和镉

以实际城市污泥为研究对象,通过采用表面活性剂作为阴极液,并考虑阴极液pH值、表面活性剂类型和电压3种因素对动电技术去除污泥中重金属(铜和镉)的影响,选用正交试验确定最佳试验条件.结果表明,采用表明活性剂作为阴极液加强动电技术去除污泥中重金属足可行的,铜和镉的去除率分别达到11.1%～52.6%和9.1%～46.7%.通过对正交试验结果进行极差和方差分析,试验的最佳条件为:电压为20 V,阴极液加入十六烷基三甲基氯化铵并控制pH值为4～6.表面活性剂的类型对动电技术去除镉具有显著影响.其中,表面活性剂类型对动电过程的影响最大,阴极液pH值次之,电压影响最小.     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

Assessing the Influence of Social Responsibility on Reputation: An Empirical Case-Study in Agricultural Cooperatives in Spain

The attention to ethics has gradually become a concurrent topic of modern companies’ management. In the last years Social Responsibility has become a key issue in the strategic agenda of competitive agriculture cooperatives. However, reputation management has not been a visible strength in the cooperative enterprises. First of all, this work theoretically analyzes the relationship between Social Responsibility and reputation in cooperatives. Later, from a practical point of view, we carry on an empirical analysis focused on the olive oil cooperatives in the south of Spain, in the province of Jaén. With respect to the previous studies on the topic, this work reveals a main reason of interest reinforcing the role of research in addressing real problems of cooperatives. The article points out the characteristics of this kind of agribusiness and shows the importance of the adoption of a responsible orientation in fostering reputation for creating sustainable competitive advantages.     

Robust optimization evaluation of reliance on locally produced foods

While local food production may be beneficial in terms of developing the local economy and reducing greenhouse gases from transportation, sustainability strategies focused on local food production may generate their own risks due to yield variability. We have developed a robust optimization (RO) model to determine the minimum amount of land (cropland and pasture) required to grow food items that would satisfy a local population’s (accounting for gender and age) calorie and nutrient needs. This model has been applied to Boone County, Missouri, which has a population of approximately 170,000. Boone County is 1790 km², with 16% of the land defined as cropland and 30% defined as pasture. The model includes 27 nutrients from 17 potential foods that could be produced: six fruits and vegetables, five grains and six animal-sourced foods. Yield estimates are based on the predominate methods of agriculture in the USA. We first run our model assuming no variability, using the midpoint yield estimates. Then, to quantify uncertainty in yield for different food types, we use historical yield data over 10 years to estimate this variability and run our RO model under these variability estimates. We compare the two model results to illustrate the impact of data uncertainty on meeting sustainable local food for communities. Solutions suggest that nutrition needs can be met for the Boone County population within the land area defined.