Toward chemical-free reclamation of biologically pretreated greywater: solar photocatalytic oxidation with powdered activated carbon

Heterogeneous photocatalytic oxidation is a water reclamation technology which avoids chemical consumption and can be powered by solar radiation. Because this generally sustainable process is of limited efficiency for the treatment of biologically pretreated greywater, it was combined with activated carbon adsorption. The effluent of a constructed wetland for treatment of separately collected greywater was subjected to photocatalytic oxidation using the photocatalyst titanium dioxide (TiO₂) “P25” in both the absence and the presence of powdered activated carbon (PAC). Photocatalytic oxidation alone with UV fluences of about 10 Wh L^?1 was not capable of reducing total organic carbon (TOC) from an initial concentration of 5.5 mg L^?1 safely below 2 mg L^?1 as a prerequisite for high-quality water reuse purposes. However, when PAC was added, TOC concentrations subsequent to photocatalytic oxidation were less than 2 mg L^?1 even after reusing the TiO₂/PAC mixture 10 times. PAC addition is estimated to reduce the insolation area necessary to achieve this target by solar photocatalytic oxidation of biologically treated greywater by a factor 7. This combination process represents an innovative chemical-free technology within wastewater reuse schemes.     

Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Experimental and life cycle assessment analysis of gas emission from mechanically–biologically pretreated waste in a landfill with energy recovery

The global gaseous emissions produced by landfilling the Mechanically Sorted Organic Fraction (MSOF) with different weeks of Mechanical Biological Treatment (MBT) was evaluated for an existing waste management system. One MBT facility and a landfill with internal combustion engines fuelled by the landfill gas for electrical energy production operate in the waste management system considered. An experimental apparatus was used to simulate 0, 4, 8 and 16 weeks of aerobic stabilization and the consequent biogas potential (Nl/kg) of a large sample of MSOF withdrawn from the full-scale MBT. Stabilization achieved by the waste was evaluated by dynamic oxygen uptake and fermentation tests. Good correlation coefficients (R²), ranging from 0.7668 to 0.9772, were found between oxygen uptake, fermentation and anaerobic test values. On the basis of the results of several anaerobic tests, the methane production rate k (year^?1) was evaluated. k ranged from 0.436 to 0.308 year^?1 and the bio-methane potential from 37 to 12 N m³/tonne, respectively, for the MSOF with 0 and 16 weeks of treatment. Energy recovery from landfill gas ranged from about 11 to 90 kW h per tonne of disposed MSOF depending on the different scenario investigated. Life cycle analysis showed that the scenario with 0 weeks of pre-treatment has the highest weighted global impact even if opposite results were obtained with respect to the single impact criteria. MSOF pre-treatment periods longer than 4 weeks showed rather negligible variation in the global impact of system emissions.     

Effects of ozone fumigation treatment on the removal of residual difenoconazole from strawberries and on their quality

The effect of ozone fumigation on the reduction of difenoconazole residue on strawberries was studied. Strawberries were immersed in 1.0 L of aqueous solution containing 400 μL of the commercial product (250 g L^?1 of difenoconazole) for 1 min. Then, they were dried and exposed to ozone gas (O₃) at concentrations of 0.3, 0.6 and 0.8 mg L^?1 for 1 h. The ozone fumigation treatments reduced the difenoconazole residue on strawberries to concentrations below 0.5 mg kg^?1, which corresponds to a 95% reduction. The strawberries treated with ozone and the control group, which was not treated with ozone, were stored at 4°C for 10 days. Some characteristics of the fruit were monitored throughout this period. Among these, pH, weight loss and total color difference did not change significantly (P > 0.05). The fumigation with ozone significantly affected the soluble solids, titratable acidity and ascorbic acid content (vitamin C) of the strawberries preventing a sharp reduction of these parameters during storage.     

Dimensions of Job Control in Computerized and Traditional Office Work and Its Health Effects

This study investigates whether a consistent relationship exists between computerization and job control. It also examines the role of job control as a predictor of stress symptoms typical for data entry and word processing (VDU) work. Two groups of VDU users and two comparable non-VDU-user groups took part in this study. A special questionnaire made it possible to assess global job control and four indexes of control related to specific aspects of work (control over choice of tasks and methods, control over time frame, control related to one’s skill, and control related to participation in the decision-making process). Results did not show an unequivocal relation between computerization and the latitude of control. The latitude of control depends on the task performed and the aspect of control we are considering. Regression analyses showed that global control is a good predictor of job satisfaction, some mood disturbances, and visual complaints. The other aspects of control are related in a variety of ways to stress symptoms. The role of a Type A behavior pattern in the relationship between job control and stress symptoms varies depending on which aspect of control is being considered. It was concluded that because of the high functional differences between various aspects of control, it is better to avoid using the concept of global control and, when possible, apply specific indexes of control.