Treatment of digestate from a co-digestion biogas plant by means of vacuum evaporation: Tests for process optimization and environmental sustainability

Vacuum evaporation consists in the boiling of a liquid substrate at negative pressure, at a temperature lower than typical boiling temperature at atmospheric conditions. Condensed vapor represents the so called condensate, while the remaining substrate represents the concentrate.This technology is derived from other sectors and is mainly dedicated to the recovery of chemicals from industrial by-products, while it has not been widely implemented yet in the field of agricultural digestate treatment. The present paper relates on experimental tests performed in pilot-scale vacuum evaporation plants (0.100 and 0.025 m³), treating filtered digestate (liquid fraction of digestate filtered by a screw-press separator). Digestate was produced by a 1 MW_e anaerobic digestion plant fed with swine manure, corn silage and other biomasses. Different system and process configurations were tested (single-stage and two-stage, with and without acidification) with the main objectives of assessing the technical feasibility and of optimizing process parameters for an eventual technology transfer to full scale systems.The inputs and outputs of the process were subject to characterization and mass and nutrients balances were determined.The vacuum evaporation process determined a relevant mass reduction of digestate.The single stage configuration determined the production of a concentrate, still in liquid phase, with a total solid (TS) mean concentration of 15.0%, representing, in terms of mass, 20.2% of the input; the remaining 79.8% was represented by condensate. The introduction of the second stage allowed to obtain a solid concentrate, characterized by a content of TS of 59.0% and representing 5.6% of initial mass.Nitrogen balance was influenced by digestate pH: in order to limit the stripping of ammonia and its transfer to condensate it was necessary to reduce the pH. At pH 5, 97.5% of total nitrogen remained in the concentrate. This product was characterized by very high concentrations of total Kjeldhal nitrogen (TKN), 55,000 mg/kg as average.Condensate, instead, represented 94.4% of input mass, containing 2.5% of TKN. This fraction could be discharged into surface water, after purification to meet the criteria imposed by Italian regulation. Most likely, condensate could be used as dilution water for digestion input, for cleaning floor and surfaces of animal housings or for crop irrigation.The research showed the great effectiveness of the vacuum evaporation process, especially in the two stage configuration with acidification. In fact, the concentration of nutrients in a small volume determines easier transportation and reduction of related management costs. In full scale plants energy consumption is estimated to be 5–8 kWh_e/m³ of digestate and 350 kWh_t/m³ of evaporated water.     

Chicken manure enhanced yield and quality of field-grown kale and collard greens

Organic matter and nutrients in municipal sewage sludge (SS) and chicken manure (CM) could be recycled and used for land farming to enhance fertility and physical properties of soils. Three soil management practices were used at Kentucky State University Research Farm, Franklin County, to study the impact of soil amendments on kale (Brassica oleracea cv. Winterbar) and collard (Brassica oleracea cv. Top Bunch) yields and quality. The three soil management practices were: (i) SS mixed with native soil at 15 t acre^?1, (ii) CM mixed with native soil at 15 t acre^?1, and (iii) no-mulch (NM) native soil for comparison purposes. At harvest, collard and kale green plants were graded according to USDA standards. Plants grown in CM and SS amended soil produced the greatest number of U.S. No. 1 grade of collard and kale greens compared to NM native soil. Across all treatments, concentrations of ascorbic acid and phenols were generally greater in kale than in collards. Overall, CM and SS enhanced total phenols and ascorbic acid contents of kale and collard compared to NM native soil. We investigated the chemical and physical properties of each of the three soil treatments that might explain variability among treatments and the impact of soil amendments on yield, phenols, and ascorbic acid contents of kale and collard green grown under this practice.     

Fire Mosaics and Reptile Conservation in a Fire‐Prone Region

Fire influences the distribution of fauna in terrestrial biomes throughout the world. Use of fire to achieve a mosaic of vegetation in different stages of succession after burning (i.e., patch‐mosaic burning) is a dominant conservation practice in many regions. Despite this, knowledge of how the spatial attributes of vegetation mosaics created by fire affect fauna is extremely scarce, and it is unclear what kind of mosaic land managers should aim to achieve. We selected 28 landscapes (each 12.6 km²) that varied in the spatial extent and diversity of vegetation succession after fire in a 104,000 km² area in the semiarid region of southeastern Australia. We surveyed for reptiles at 280 sites nested within the 28 landscapes. The landscape‐level occurrence of 9 of the 22 species modeled was associated with the spatial extent of vegetation age classes created by fire. Biogeographic context and the extent of a vegetation type influenced 7 and 4 species, respectively. No species were associated with the diversity of vegetation ages within a landscape. Negative relations between reptile occurrence and both extent of recently burned vegetation (≤10 years postfire, n = 6) and long unburned vegetation (>35 years postfire, n = 4) suggested that a coarse‐grained mosaic of areas (e.g. >1000 ha) of midsuccessional vegetation (11–35 years postfire) may support the fire‐sensitive reptile species we modeled. This age class coincides with a peak in spinifex cover, a keystone structure for reptiles in semiarid and arid Australia. Maintaining over the long term a coarse‐grained mosaic of large areas of midsuccessional vegetation in mallee ecosystems will need to be balanced against the short‐term negative effects of large fires on many reptile species and a documented preference by species from other taxonomic groups, particularly birds, for older vegetation. Mosaicos de Fuego y la Conservación de Reptiles en una Región Propensa al Fuego     

Fluoride Emissions and Forest Growth

Abstract

The October 1995 court decision allowing Ethyl Corporation to offer methylcyclopentadienyl manganese tricarbonyl (MMT) for sale to refiners for introduction into unleaded gasoline as an octane enhancer is likely to result in increased fine (PM_2.5) manganese (Mn) concentrations in ambient air. Concern exists regarding possible health effects. In this paper, recent fine Mn concentrations in three monitoring networks and one U.S. Environmental Protection Agency (EPA) study of personal exposure are analyzed. One network consists mainly of rural sites in national parks in the United States, a second consists mainly of urban sites in California, and the third consists mainly of urban sites in Canada where MMT has been used for a number of years. During the late 1980s and early 1990s, mean ambient concentrations ranged from 1 ng/m³ in the mostly rural network to 3 ng/m³ in the mostly urban California network to 12 ng/m³ in the MMT-impacted Canadian network. Several lines of evidence suggested that some of the fine Mn observed in the United States during the 1986-1992 period was contributed by automobiles using leaded gasoline, for which MMT was a registered fuel additive. However, the near-disappearance of leaded gasoline has resulted in a very small portion of fine Mn being attributed to automobiles in the years since 1992.A source apportionment analysis suggested that crustal contributions to ambient fine Mn are on the order of 1-2 ng/m³ in both the United States and Canada.     

Biosorption of zinc ions from aqueous solution by the microalga Scenedesmus obliquus

Aquatic environments are often exposed to toxic heavy metals, which gain access to the food chain via microalgae and may cause severe problems at higher trophic levels. However, such a metabolic specificity can be taken advantage of in bioremediation strategies. The potential of a novel wild strain of Scenedesmus obliquus, previously isolated from a heavy metal-contaminated site in northern Portugal, to remove Zn from aqueous solutions was thus studied, using several initial concentrations. The removal extent reached its maximum by 1 day: 836.5 mg Zn/g biomass, at the initial concentration of 75 mg/L, mainly by adsorption onto the cell surface. Comparative studies encompassing a commercially available strain of the same microalgal species led to a maximum removal extent of only 429.6 mg Zn/g biomass, under identical conditions. Heat-inactivated cells permitted a maximum removal of 209.6 mg Zn/g biomass, at an initial concentration of 50 mg Zn/L. The maximum adsorption capacity of Zn, estimated via Langmuir’s isotherm, was 330 mg Zn/g biomass. Finally, Zn removal was highest at pH 6.0–7.0. It was proven, for the first time, that such a wild microalga can uptake and adsorb Zn very efficiently, which unfolds a particularly good potential for bioremediation. Its performance is far better than similar (reference) species, especially near neutrality, and even following heat-treatment.     

Paradigms for parasite conservation

Parasitic species, which depend directly on host species for their survival, represent a major regulatory force in ecosystems and a significant component of Earth's biodiversity. Yet the negative impacts of parasites observed at the host level have motivated a conservation paradigm of eradication, moving us farther from attainment of taxonomically unbiased conservation goals. Despite a growing body of literature highlighting the importance of parasite‐inclusive conservation, most parasite species remain understudied, underfunded, and underappreciated. We argue the protection of parasitic biodiversity requires a paradigm shift in the perception and valuation of their role as consumer species, similar to that of apex predators in the mid‐20th century. Beyond recognizing parasites as vital trophic regulators, existing tools available to conservation practitioners should explicitly account for the unique threats facing dependent species. We built upon concepts from epidemiology and economics (e.g., host‐density threshold and cost‐benefit analysis) to devise novel metrics of margin of error and minimum investment for parasite conservation. We define margin of error as the risk of accidental host extinction from misestimating equilibrium population sizes and predicted oscillations, while minimum investment represents the cost associated with conserving the additional hosts required to maintain viable parasite populations. This framework will aid in the identification of readily conserved parasites that present minimal health risks. To establish parasite conservation, we propose an extension of population viability analysis for host–parasite assemblages to assess extinction risk. In the direst cases, ex situ breeding programs for parasites should be evaluated to maximize success without undermining host protection. Though parasitic species pose a considerable conservation challenge, adaptations to conservation tools will help protect parasite biodiversity in the face of an uncertain environmental future.     

Quantitative microbial risk assessment (QMRA) for setting health-based performance targets during soil aquifer treatment

Environmental Science and Pollution Research - A quantitative microbial risk assessment was conducted to assess the health risks associated with the exposure of agricultural workers to tertiary...     

Use of co-combustion bottom ash to design an acoustic absorbing material for highway noise barriers

The present study aims to determine and evaluate the applicability of a new product consisting of coal bottom ash mixed with Portland cement in the application of highway noise barriers. In order to effectively recycle the bottom ash, the influence of the grain particle size of bottom ash, the thickness of the panel and the combination of different layers with various particle sizes have been studied, as well as some environmental properties including leachability (EN-12457-4, NEN-7345) and radioactivity tests. Based on the obtained results, the acoustic properties of the final composite material were similar or even better than those found in porous concrete used for the same application. According to this study, the material produced presented no environmental risk.     

Inexact fuzzy-stochastic constraint-softened programming – A case study for waste management

In this study, an inexact fuzzy-stochastic constraint-softened programming method is developed for municipal solid waste (MSW) management under uncertainty. The developed method can deal with multiple uncertainties presented in terms of fuzzy sets, interval values and random variables. Moreover, a number of violation levels for the system constraints are allowed. This is realized through introduction of violation variables to soften system constraints, such that the model’s decision space can be expanded under demanding conditions. This can help generate a range of decision alternatives under various conditions, allowing in-depth analyses of tradeoffs among economic objective, satisfaction degree, and constraint-violation risk. The developed method is applied to a case study of planning a MSW management system. The uncertain and dynamic information can be incorporated within a multi-layer scenario tree; revised decisions are permitted in each time period based on the realized values of uncertain events. Solutions associated with different satisfaction degree levels have been generated, corresponding to different constraint-violation risks. They are useful for supporting decisions of waste flow allocation and system-capacity expansion within a multistage context.     

Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.