Dependence of home outdoor particulate mass and number concentrations on residential and traffic features in urban areas

The associations between residential outdoor and ambient particle mass, fine particle absorbance, particle number (PN) concentrations, and residential and traffic determinants were investigated in four European urban areas (Helsinki, Athens, Amsterdam, and Birmingham). A total of 152 nonsmoking participants with respiratory diseases, not exposed to occupational pollution, were included in the study, which comprised a 7-day intensive exposure monitoring period of both indoor and home outdoor particle mass and number concentrations. The same pollutants were also continuously measured at ambient fixed sites centrally located to the studied areas (fixed ambient sites). Relationships between concentrations measured directly outside the homes (residential outdoor) and at the fixed ambient sites were pollutant-specific, with substantial variations among the urban areas. Differences were more pronounced for coarse particles due to resuspension of road dust and PN, which is strongly related to traffic emissions. Less significant outdoor-to-fixed variation for particle mass was observed for Amsterdam and Birmingham, predominantly due to regional secondary aerosol. On the contrary, a strong spatial variation was observed for Athens and to a lesser extent for Helsinki. This was attributed to the overwhelming and time-varied inputs from traffic and other local sources. The location of the residence and traffic volume and distance to street and traffic light were important determinants of residential outdoor particle concentrations. On average, particle mass levels in suburban areas were less than 30% of those measured for residences located in the city center. Residences located less than 10 m from a street experienced 133% higher PN concentrations than residences located further away. Overall, the findings of this multi-city study, indicated that (1) spatial variation was larger for PN than for fine particulate matter (PM) mass and varied between the cities, (2) vehicular emissions in the residential street and location in the center of the city were significant predictors of spatial variation, and (3) the impact of traffic and location in the city was much larger for PN than for fine particle mass.     

Low VOC latex paints from a precipitation polymerization process

Even though paints and coatings have been very useful in protecting various substrates, their use has been accompanied by a heavy environmental price. There is a need to minimize the use of volatile organic compounds (VOCs) in the formulation of these materials. In the latex paint area, we have implemented a conventional precipitation process in emulsions to form binder particles that contain block copolymers and have softer blocks on the particle surface. The softer surface provides the binder film-forming properties without the need for the use of solvents or VOCs. The covalent connections between the soft blocks and the hard blocks are expected to impart good performance in the resulting dry coatings. Indeed, we have shown that our test coating from these binder particles containing block copolymer have similar properties in most performance categories to those of a semi-gloss control paint that has been formulated with typical amounts of VOCs.     

The effects of proximal and distal goals on performance on a moderately complex task

The effect of a proximal plus a distal goal was investigated relative to setting only a distal goal or urging participants to do their best. Young adults (N=39) were paid on a piece rate basis to make toys. An analysis of variance revealed that the amount of money earned by the participants who were urged to ‘do your best’ was significantly greater than the amount of money earned by the participants who were assigned a distal goal. However, the amount of money earned by the participants who were assigned proximal goals, in addition to a distal goal, was significantly greater than the amount of money earned by the participants in the ‘do your best’ condition. The correlation between perceived self‐efficacy and the amount of money earned was 0.45 (p<0.01). Perceived self‐efficacy significantly increased only for those participants in the proximal plus distal goal condition. Proximal goals, through self‐efficacy and performance feedback, appear to have focused attention on task appropriate strategies. The results suggest an informational explanation of proximal goals as opposed to a motivational one through goal commitment. Implications of these findings for mentoring and training are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Exorbitant mortality of hatchery-reared Atlantic salmon smolts Salmo salar L., in the Meuse river system in the Netherlands

Stocking Atlantic salmon Salmo salar L. in the Meuse river system is unsuccessful, since hardly any adults return upstream. To investigate problems during seaward migration, individual salmon smolts were tracked in the Dutch part of the river Meuse, using the Nedap Trail® system. The study included a comparison for two seasons, one with high (2010) and one with low (2011) discharge conditions. Cultivated smolts (Loire-Allier strain, n = 100 per year) were implanted with telemetry tags and released in the tributary Roer in March, at the beginning of the natural smolt run. The study area was split into four river sections each characterized by different conditions: tributary Roer, main river Meuse extensively dammed, main river Meuse free flowing and the estuary. Mortalities differed considerably between sections. In the free flowing river Meuse the mortalities were relatively low (10 and 25 %). Mortalities were high in the tributary (44 and 45 %), the dammed river (46 and 49 %) and in the estuary (89 and 90 %). Only 2 and 3 % of the smolts escaped into the North Sea. Results are discussed in relation to environmental factors light and discharge and the presence of man-made obstacles: weirs, hydropower plants and a sea lock. A lack of current and delays at man-made obstacles result in disorientation of fish, a higher risk of predation and disturbance of the smolt run timing. Mortality causes must decrease for sustaining a salmon population in the Meuse.     

Poultry litter application to loblolly pine forests: growth and nutrient containment

Forestland application of poultry manure offers an alternative to the conventional practice of pastureland application. Before such a practice is considered viable, however, it must be demonstrated that the forest ecosystem is capable of absorbing the nutrients contained in poultry manure, especially nitrogen (N) and phosphorus (P). From the forestry perspective, it must also be demonstrated that tree growth is not diminished. We investigated these questions using loblolly pine (Pinus taeda L.) stands growing in central Mississippi in an area of high poultry production. Stockpiled broiler litter was applied to newly thinned, 8-yr-old stands at 0, 4.6, and 18.6 dry Mg ha-1, supplying 0, 200, and 800 kg N ha-1 and 0, 92, and 370 kg P ha-1, respectively. Levels of nitrate in soil water, monitored at a 50-cm depth with porous cup tension lysimeters, exceeded 10 mg N L-1 during the first two years after application in the 18.6 Mg ha-1 rate but only on two occasions in the first year for the lower rate of application. Phosphate was largely absent from lysimeter water in all treatments. Other macronutrients (K, Ca, Mg, S) were elevated in lysimeter water in proportion to litter application rates. Soil extractable nitrate showed similar trends to lysimeter water, with substantial elevation during the first year following application for the 18.6 Mg ha-1 rate. Mehlich III-extractable phosphate peaked in excess of 100 microg P g-1 soil during the third year of the study for the 18.6 Mg ha-1 rate. The 4.6 Mg ha-1 rate did not affect extractable soil P. Tree growth was increased by the poultry litter. Total stem cross-sectional area, or basal area, was approximately 20% greater after 2 yr for both rates of litter application. Overall, the nutrients supplied by the 4.6 Mg ha-1 rate were contained by the pine forest and resulted in favorable increases in tree growth. The higher rate, by contrast, did pose some risk to water quality through the mobilization of nitrate. These results show that, under the conditions of this study, application of poultry litter at moderate rates of approximately 5 Mg ha-1 to young stands of loblolly pine offers an alternative disposal option with minimal impacts to water quality and potential increases in tree growth.     

Black carbon-dominated PCDD/Fs sorption to soils at a former wood impregnation site

The influence of black carbon (BC) on the sorption of 17 native polychlorinated-p-dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was studied in five soil samples from a sawmill site where wood used to be impregnated with chlorophenol preservatives. The presence of BC caused measured total organic carbon (TOC)-water distribution ratios (K(TOC)) to be a median factor of 51 (interquartile range 18-68, n=85) higher than modeled amorphous organic carbon (AOC)-water distribution ratios (K(AOC)). K(TOC) was a factor of 73+/-27 above K(AOC) for PCDFs (n=10) and a factor of 20+/-13 (n=7) for PCDDs. The reason for this difference is probably that attaining a planar configuration after sorption to BC is less thermodynamically favorable for PCDDs than for PCDFs. BC-water distribution ratios were calculated from K(TOC), K(AOC) and BC contents, and ranged from 10(9.9) (2,3,7,8-Tetra-CDD) to 10(11.5) l kg(-1) (Octa-CDF). More than 90% of the PCDD/Fs in the soil was calculated to be BC-sorbed. Dissolved organic carbon (DOC)-water distribution ratios were measured to be in the same order of magnitude as K(AOC). This study shows that strong sorption to BC should be included when assessing ecotoxicological risk or modeling transport to groundwater of PCDD/Fs in soil.     

Assessing PAH and PCB emissions from the relocation of harbour sediments using equilibrium passive samplers

Large-scale dredging of contaminated sediments is taking place in the harbor of Oslo, Norway. The dredged sediment masses are transferred into a confined aquatic disposal facility (CAD) in a natural 70-m deep basin within the Oslofjord. Currently there is no established method to determine how much dissolved contaminants are released during relocation and deposition of these sediments. For this reason we tested the use of equilibrium passive samplers consisting of 55 microm thin polyoxymethylene (POM-55) for studying the release of freely dissolved and thus bioavailable PAHs and PCBs at the disposal site, and found this to be a suitable method. In order to use POM-55 for monitoring PCBs, it was necessary to measure their POM-55/water partition coefficients, which was also presented as part of this study. Elevated turbidity (average 4.1 mg l(-1)) was observed at one side of the basin where no natural sill exists. Analysis of POM-55 at this location before and after deposition revealed that there was an increase in freely dissolved concentrations (C(W,free)) during deposition by a factor 37.5 for PAHs and a factor of 2.9 for PCBs. In addition, during deposition phenanthrene-to-anthracene aqueous concentration ratios at this location (values of 3-4) were more similar to those of the deposited sediments (approximately 2) than to those of the CAD water prior to deposition (approximately 14). This was not observed for the other locations where a natural sill exists at approximately 30 m water depth. The POM-55 equilibrium passive samplers are here shown to be useful tools for measuring and understanding the dynamics involved in the release of dissolved contaminants during sediment relocation.     

The law and economics of reclamation bonds

It is becoming a standard practice for governments to require mining operations to post reclamation bonds. Yet, there have been few theoretical treatments examining the rationale for bonding mechanisms, and even fewer empirical treatments of the effectiveness of bonding. This paper addresses some of these holes in the literature. It begins by examining the rationale underlying reclamation bonds, and discusses the strengths and weaknesses of bonding as a tool for enforcing reclamation requirements. The role of bonding mechanisms is to help enforce standards, not necessarily yield efficient outcomes, and these mechanisms are best viewed as a complement to — not a substitute for — liability rules. The paper also examines the effectiveness of bonding by drawing on evidence from hardrock mining on public lands in the western United States.     

A Benefit‐Cost Analysis of Total Maximum Daily Load Implementation1

Abstract: Total Maximum Daily Load (TMDL) implementation generates benefits and costs from water quality improvements, which are rarely quantified. This analysis examines a TMDL written to address bacteria and aquatic‐life‐use impairments on Abrams and Opequon Creeks in Virginia. Benefits were estimated using a contingent valuation survey of local residents. Costs were based on the number and type of best management practices (BMPs) necessary to achieve TMDL pollution reduction goals. BMPs were quantified using watershed‐scale water quality simulation models (Generalized Watershed Loading Function and Hydrological Simulation Program‐FORTRAN). Based on our projections, the costs to achieve TMDL induced pollution reduction goals outweigh the estimated benefits. Benefit‐cost ratios ranged between 0.1 and 0.3.     

Water/acid gas interfacial tensions and their impact on acid gas geological storage

Acid gas geological disposal is a promising process to reduce CO₂ atmospheric emissions and an environment-friendly and economic alternative to the transformation of H₂S into sulphur by the Claus process. Acid gas confinement in geological formations is to a large extent controlled by the capillary properties of the water/acid–gas/caprock system, because a significant fraction of the injected gas rises buoyantly and accumulates beneath the caprock. These properties include the water/acid gas interfacial tension (IFT), to which the so-called capillary entry pressure of the gas in the water-saturated caprock is proportional. In this paper we present the first ever systematic water/acid gas IFT measurements carried out by the pendant drop technique under geological storage conditions. We performed IFT measurements for water/H₂S systems over a large range of pressure (up to P = 15 MPa) and temperature (up to T = 120 °C). Water/H₂S IFT decreases with increasing P and levels off at around 9–10 mN/m at high T (≥70 °C) and P (>12 MPa). The latter values are around 30–40% of water/CO₂ IFTs, and around 20% of water/CH₄ IFTs at similar T and P conditions. The IFT between water and a CO₂ + H₂S mixture at T = 77 °C and P > 7.5 MPa is observed to be approximately equal to the molar average IFT of the water/CO₂ and water/H₂S binary mixtures. Thus, when the H₂S content in the stored acid gas increases the capillary entry pressure decreases, together with the maximum height of acid gas column and potential storage capacity of a given geological formation. Hence, considerable attention should be exercised when refilling with a H₂S-rich acid gas a depleted gas reservoir, or a depleted oil reservoir with a gas cap: in the case of hydrocarbon reservoirs that were initially (i.e., at the time of their discovery) close to capillary leakage, acid gas leakage through the caprock will inevitably occur if the refilling pressure approaches the initial reservoir pressure.