Pulsed gas injection: A minimum effort approach for enhanced natural attenuation of chlorobenzene in contaminated groundwater

Chlorobenzene-contaminated groundwater was used to assess pulsed gas sparging as a minimum effort aeration strategy to enhance intrinsic natural attenuation. In contrast to existing biosparging operations, oxygen was supplied at minimum rate by reducing the gas injection frequency to 0.33 day^?1. Field tests in a model aquifer were conducted in a 12 m long reactor, filled with indigenous aquifer material and continuously recharged with polluted groundwater over 3 years. The closed arrangement allowed yield balances, cost accounting as well as the investigation of spatial distributions of parameters which are sensitive to the biodegradation process. Depending on the injection frequency and on the gas chosen for injection (pure oxygen or air) oxygen-deficient conditions prevailed in the aquifer. Despite the limiting availability of dissolved oxygen in the groundwater, chlorobenzene degradation under oxygen-deficient conditions proved to be more effective than under conditions with dissolved oxygen being available in high concentrations.     

Quantifying emissions of primary biological aerosol particle mass in Europe

Atmospheric concentration measurements of tracers for primary biological aerosol particles (PBAPs) have been used to obtain estimates of their release into the atmosphere. Emission flux data of surrogate compounds, for which concurrent concentration measurements were available, were used to quantify the release of PBAPs as PM₁₀ mass. Results indicate fungal spores to be the most important contributors. One other main source is plant debris. Area-based emission rates of 24 kg km^?2 and year (range 6–90) have been assessed. Results scaled for Europe indicate a contribution of PBAPs to PM₁₀ concentrations in the low percentage range, with a maximum in summer when concentration levels are small. This is consistent with the range of measurements. Despite of the large uncertainties, results contribute to clarify the potential contribution of biological particles to global load of particle mass.     

Numerical simulation of reactive processes in an experiment with partially saturated bentonite

Bentonites are preferred materials for use as engineered barriers for high-level nuclear waste repositories. Simulation of geochemical processes in bentonite is therefore important for long-term safety assessment of those repositories. In this work, the porewater chemistry of a bentonite sample subject to simultaneous heating and hydration, as studied by Cuevas et al. [Cuevas, J., Villar, M., Fernández, A., Gómez, P., Martín, P., 1997. Porewaters extracted from compacted bentonite subjected to simultaneous heating and hydration. Applied Geochemistry 12, 473-481.], was assessed with a non-isothermal reactive transport model by coupling the geochemical software PHREEQC2 with the object-oriented FEM simulator GeoSys/RockFlow. Reactive transport modelling includes heat transport, two-phase flow, multicomponent transport and geochemical reactions in the liquid phase, i.e. ion exchange, mineral dissolution/precipitation and equilibrium reactions. Simulations show that the easily soluble minerals in bentonite determine the porewater chemistry. Temperature affects both two-phase flow and geochemical reactions. Porosity change due to dissolution/precipitation is low during the experiment. However, changes of the effective porosity caused by bentonite swelling can be very large. The simulated results agree well with the experimental data.     

The annual course of TCA formation in the lower troposphere: a modeling study

We present a modeling study investigating the influence of climate conditions and solar radiation intensity on gas-phase trichloroacetic acid (TCA) formation. As part of the ECCA-project (Ecotoxicological Risk in the Caspian Catchment Area), this modeling study uses climate data specific for the two individual climate regimes, namely "Kalmykia" and "Kola Peninsula". A third regime has also been included in this study, namely "Central Europe", which serves as a reference to somehow more moderate climate conditions. The simulations have been performed with a box modeling package (SBOX, photoRACM), which uses Regional Atmospheric Chemistry Mechanism (RACM) as its chemistry scheme. For this model a mechanism supplement has been developed including the reaction pathways of methyl chloroform photooxidation. The investigations are completed by a detailed sensitivity study addressing the impact of temperature and relative humidity. Atmospheric OH and HO2 concentrations and the NOx/HO2 ratio were identified as the governing quantities controlling the TCA formation trough methyl chloroform oxidation in the gas phase. Model calculations show a TCA production rate ranging between almost zero and 6.5 x 10(3) molecules cm(-3) day(-1) depending on location and season. In the Kalmykia regime the model predicts mean TCA production rates of 1.3 x 10(-4) and 5.4 x 10(-5) microg m(-3) year(-1) for the urban and rural environment, respectively. From the comparison of model calculations with measured TCA burdens in the soil ranging between 130 g m(-3) and 1750 g m(-3) we conclude that TCA formation through methyl chloroform photooxidation in the gas-phase is probably not the principal atmospheric TCA source in this region.     

Rapid,ultra-sensitive detection of gas phase elemental mercury under atmospheric conditions using sequential two-photon laser induced fluorescence

We have examined the sensitivity of sequential two photon laser induced fluorescence (LIF) detection of elemental mercury, Hg(0) in the gas phase. The most sensitive approach involves an initial laser excitation of the 6(3)P1-6(1)S0 transition at 253.7 nm, followed by excitation with a second laser to the 7(1)S0 level. Blue shifted fluorescence is observed on the 6(1)P1-6(1)S0 transition at 184.9 nm. The excitation scheme, involving sequential excitation of two atomic transitions, followed by detection of the emission from a third is extremely specific and precludes detection of anything other than atomic mercury. Using our 10 Hz laser system we have achieved a detection sensitivity of 0.1 ng m(-3) at a sampling rate of 0.1 Hz, i.e. averaging 100 laser shots at a pressure of one atmosphere in air. At low concentrations we sampled simultaneously with an automated mercury analyzer (Tekran 2537A), to ensure accuracy. We have examined the linearity of the technique, generating flows containing mercury concentrations between 1 and 10,000 ng m(-3) using a permeation tube and dynamic dilution, but relying on the concentrations given by the Tekran at low levels and the concentration calculated from dilution at high levels. We find that the detection is linear over the five orders of magnitude that we were able to vary the concentration. Our measured detection limits in He and Ar are much lower as these gases are inefficient fluorescence quenchers.     

Local opposition against high-voltage grids: public responses to agency-caused science–policy trolls

High-voltage (hV) transmission grids are projects of societal importance that potentially have controversial social and environmental impacts. Former research shows that public opposition is sparked by the perception of negative local impacts and unjust concessionary processes. In this paper, we complement these perspectives by assessing the institutional practices of the regulatory agencies in dealing with scientific uncertainties. The regulatory agencies’ ‘ways of doing things’ are often designed to serve policy and management needs. A critical point is that the demarcation between scientifically based facts, values and assessments is often blurred in the decision-making process. This paper draws on two Norwegian case studies to investigate how the regulatory agencies dealt with (1) electromagnetic fields and health risks and (2) overhead lines versus sea cables. We argue that ambiguities and uncertainties that arise in the hV transmission line processes create ‘trolls’, and we explore how the local inhabitants and affected stakeholders in the two cases responded to these and how it triggered further opposition. By investigating how and why trolls appear and are handled, we conclude by discussing how public opposition related to hV transmission grids may be reduced – and how some ‘trolls’ may crack.     

The use of semipermeable membrane devices as passive samplers to determine persistent organic compounds in indoor air

In the study reported here semipermeable membrane devices (SPMDs) were used to sample 28 PAHs and 19 PCBs in the gas phase in 15 single-family houses located in an area where domestic wood burning is widespread. Eight of the households used wood burning appliances whereas the others used other systems for residential heating. Most of the studied compounds were found in the houses: the PAHs at levels that were similar to or slightly higher than published SPMD-sampled levels for background or urban sites in Sweden, and the PCBs at levels that were somewhat lower than those recently found in both indoor and outdoor urban locations. A principal component analysis revealed that wood-burning heating systems may contribute to PAHs in indoor air. The sources may be emissions indoors or penetration from outdoors. The convenience of SPMD technology facilitates its use for semi-quantitative screening and monitoring of various persistent organic compounds indoors in dwellings and working environments.     

Evaluation of regression methodology with low-frequency water quality sampling to estimate constituent loads for ephemeral watersheds in Texas

Water quality regulation and litigation have elevated the awareness and need for quantifying water quality and source contributions in watersheds across the USA. In the present study, the regression method, which is typically applied to large (perennial) rivers, was evaluated in its ability to estimate constituent loads (NO(3)-N, total N, PO(4)-P, total P, sediment) on three small (ephemeral) watersheds with different land uses in Texas. Specifically, regression methodology was applied with daily flow data collected with bubbler stage recorders in hydraulic structures and with water quality data collected with four low-frequency sampling strategies: random, rise and fall, peak, and single stage. Estimated loads were compared with measured loads determined in 2001-2004 with an autosampler and high-frequency sampling strategies. Although annual rainfall and runoff volumes were relatively consistent within watersheds during the study period, measured annual nutrient and sediment concentrations and loads varied considerably for the cultivated and mixed watersheds but not for the pasture watershed. Likewise, estimated loads were much better for the pasture watershed than the cultivated and mixed landuse watersheds because of more consistent land management and vegetation type in the pasture watershed, which produced stronger correlations between constituent loads and mean daily flow rates. Load estimates for PO(4)-P were better than for other constituents possibly because PO(4)-P concentrations were less variable within storm events. Correlations between constituent concentrations and mean daily flow rate were poor and not significant for all watersheds, which is different than typically observed in large rivers. The regression method was quite variable in its ability to accurately estimate annual nutrient loads from the study watersheds; however, constituent load estimates were much more accurate for the combined 3-yr period. Thus, it is suggested that for small watersheds, regression-based annual load estimates should be used with caution, whereas long-term estimates can be much more accurate when multiple years of concentration data are available. The predictive ability of the regression method was similar for all of the low-frequency sampling strategies studied; therefore, single-stage or random strategies are recommended for low-frequency storm sampling on small watersheds because of their simplicity.     

Biofilms coating Schoenoplectus californicus as indicators of water quality in the Río de la Plata Estuary (Argentina)

N-ethyl-3-carbazolecarboxaldehyde-3-thio- semicarbazone (ECCT) as an new analytical reagent used for the development of a highly sensitive extractive spectrophotometric method for the determination of copper(II). The ECCT forms a greenish-yellow colored 1:1 (M:L) complex with copper(II) at pH 3.0, which is well extracted into n-butanol and shows maximum absorbance at 380nm. The color of the complex is stable for more than forty eight hours. The system obey Beer's law in the range 0.4–3.6 with 2.243 × 10⁴lmol⁻¹cm⁻¹, 2.83 × 10^-3μgcm⁻² molar absorptivity and Sandell's sensitivity respectively. The regression coefficient is 0.412 with 0.99 correlation coefficient. The precision and accuracy of the method was checked by finding the relative standard deviation (0.422%). This developed method has been successfully employed for the determination of copper(II) in environmental and pharmaceutical samples. The method is evaluated by analyzing samples from the bureau of analyzed samples (BCS 233, 266, 216/1, 207 and 179) and by inter comparison of experimental values using AAS.