Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production,incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently,3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery.However, safety control and marketability of RDF will be required at that moment.     

Effects of introducing energy recovery processes to the municipal solid waste management system in Ulaanbaatar,Mongolia

Currently, most developing countries have not set up municipal solid waste management systems with a view of recovering energy from waste or reducing greenhouse gas emissions. In this article, we have studied the possible effects of introducing three energy recovery processes either as a single or combination approach, refuse derived fuel production, incineration and waste power generation, and methane gas recovery from landfill and power generation in Ulaanbaatar, Mongolia, as a case study. We concluded that incineration process is the most suitable as first introduction of energy recovery. To operate it efficiently, 3Rs strategies need to be promoted. And then, RDF production which is made of waste papers and plastics in high level of sorting may be considered as the second step of energy recovery. However, safety control and marketability of RDF will be required at that moment.     

Photochemical smog modeling for assessment of potential impacts of different management strategies on air quality of the Bangkok Metropolitan Region, Thailand

A photochemical smog model system, the Variable-Grid Urban Airshed Model/Systems Applications International Mesoscale Model (UAM-V/SAIMM), was used to investigate photochemical pollution in the Bangkok Metropolitan Region (BMR). The model system was first applied to simulate a historical photochemical smog episode of two days (January 13-14, 1997) using the 1997 anthropogenic emission database available at the Pollution Control Department and an estimated biogenic emission. The output 1-hr ozone (O3) for BMR, however, did not meet the U.S. Environmental Protection Agency suggested performance criteria. The simulated minimum and maximum O3 values in the domain were much higher than the observations. Multiple model runs with different precursor emission reduction scenarios showed that the best model performance with the simulated 1-hr O3 meeting all the criteria was obtained when the volatile organic compound (VOC) and oxides of nitrogen (NOx) emission from mobile source reduced by 50% and carbon monoxide by 20% from the original database. Various combinations of anthropogenic and biogenic emissions in Bangkok and surrounding provinces were simulated to assess the contribution of different sources to O3 pollution in the city. O3 formation in Bangkok was found to be more VOC-sensitive than NOx-sensitive. To attain the Thailand ambient air quality standard for 1-hr O3 of 100 ppb, VOC emission in BMR should be reduced by 50-60%. Management strategies considered in the scenario study consist of Stage I, Stage II vapor control, replacement of two-stroke by four-stroke motorcycles, 100% compressed natural gas bus, 100% natural gas-fired power plants, and replacement of methyltertiarybutylether by ethanol as an additive for gasoline.     

Particulate matter in the cultivation area may contaminate leafy vegetables with heavy metals above safe levels in Korea

Environmental Science and Pollution Research - Among air pollutants, particulate matter (PM) has been identified as a major cause of environmental pollutants due to the advancement of industrial...     

Satellite monitoring for carbon monoxide and particulate matter during forest fire episodes in Northern Thailand

This study explored the use of satellite data to monitor carbon monoxide (CO) and particulate matter (PM) in Northern Thailand during the dry season when forest fires are known to be an important cause of air pollution. Satellite data, including Measurement of Pollution in the Troposphere (MOPITT) CO, Moderate Resolution Imaging Spectroradiometer aerosol optical depth (MODIS AOD), and MODIS fire hotspots, were analyzed with air pollution data measured at nine automatic air quality monitoring stations in the study area for February–April months of 2008–2010. The correlation analysis showed that daily CO and PM with size below 10 μm (PM₁₀) were associated with the forest fire hotspot counts, especially in the rural areas with the maximum correlation coefficient (R) of 0.59 for CO and 0.65 for PM₁₀. The correlations between MODIS AOD and PM₁₀, between MOPITT CO and CO, and between MODIS AOD and MOPITT CO were also analyzed, confirming the association between these variables. Two forest fire episodes were selected, and the dispersion of pollution plumes was studied using the MOPITT CO total column and MODIS AOD data, together with the surface wind vectors. The results showed consistency between the plume dispersion, locations of dense hotspots, ground monitoring data, and prevalent winds. The satellite data were shown to be useful in monitoring the regional transport of forest fire plumes.     

Indoor air pollution levels in public buildings in Thailand and exposure assessment

Levels of pollutants including PM2.5 and PM2.5 composition (black carbon and water soluble ions), SO(2), NO(2), CO, CO(2), and BTEX (benzene, toluene, ethylbenzene, xylene) were monitored for indoor and outdoor air at a university campus and a shopping center, both located in the Northern suburb of Bangkok. Sampling was done during December 2005-February 2006 on both weekdays and weekends. At the university, indoor monitoring was done in two different air conditioned classrooms which shows the I/O ratios for all pollutants to be below 0.5-0.8 during the weekends. However, on weekdays the ratios for CO(2) and most detected BTEX were above 1.0. The concept of classroom occupancy was defined using a function of the student number in a lecture hour and the number of lecture hours per day. Classroom 2, which had a higher occupancy than classroom 1, was characterized by higher concentrations of most pollutants. PM2.5 was an exception and was higher in classroom 1 (37 microg/m(3), weekdays) as compared to classroom 2 (26 microg/m(3), weekdays) which was likely linked to the dust resuspension from the carpeted floor in the former. Monitoring was also done in the shopping mall at three different sites. Indoor pollutants levels and the I/O ratios at the shopping mall were higher than at the university. Levels of all pollutants measured at the car park, except for toluene and CO(2), were the highest. I/O ratios of the pollutants at the mall were above 1.0, which indicates the relatively higher influence of the indoor sources. However, the black carbon content in PM2.5 outdoor is higher than indoor, which suggest the important contribution from outdoor combustion sources such as the traffic. Major sources of outdoor air pollution in the areas were briefly discussed. Exposure modeling was applied using the time activity and measured pollutant concentrations to assess the exposure of different groups of people in the study areas. High exposure to PM2.5, especially for the people working in the mall, should be of health effect concern.     

Metal speciation in sediment and bioaccumulation in <Emphasis Type="Italic">Meretrix lyrata</Emphasis> in the Tien Estuary in Vietnam

The concentrations of seven toxic metals (cadmium (Cd), nickel (Ni), chromium (Cr), arsenic (As), lead (Pb), copper (Cu), and zinc (Zn)) were determined in sediments and the soft tissues of a bivalve species (Meretrix lyrata) collected from the Tien Estuary in Tien Giang Province, South Vietnam. The total metal concentrations in sediments (mg/kg dry weight) increased as Cd (0.06) < Cu (5.0) < Pb (13.9) < As (16.3) < Ni (24) < Cr (50) < Zn (62). Speciation analysis revealed that these metals existed mainly in the residual fraction (43–94%), followed by the Fe-Mn oxide-bound (5–35%) and organic/sulfide-bound (0.6–9.2%) fractions. The metal concentrations in M. lyrata (mg/kg dry weight) were in the ranges of 1.3–1.9 (Cd), 1.5–2.8 (Ni), 1.8–3.4 (Cr), 11–16 (As), 0.3–0.6 (Pb), 6.9–8.7 (Cu), and 95–128 (Zn), which are safe for human consumption. The order of the mean biota-sediment accumulation factor (BSAF) of the metals in the non-residual fractions of the sediment for M. lyrata was Cd > Cu > As > Zn > Cr > Ni > Pb. The Risk Assessment Codes (RACs) suggest that the highest mobility of Cd (with RAC = 37%) poses greater environmental risk to aquatic biota. Correlation analysis results show that M. lyrata can be used as a biomonitor of Cd and Cu pollution in the exchangeable, acid-soluble, and non-residual sediment fractions.     

The potential environmental risks of pharmaceuticals in Vietnamese aquatic systems: case study of antibiotics and synthetic hormones

Presently, many pharmaceuticals are listed as emerging contaminants since they are considered to be great potential threats to environmental ecosystems. These contaminants, thus, present significant research interest due to their extensive use and their physicochemical and toxicological properties. This review discusses a whole range of findings that address various aspects of the usage, occurrence, and potentially environmental risks of pharmaceuticals released from various anthropogenic sources, with emphasis on the aquatic systems in Vietnam. The published information and collected data on the usage and occurrence of antibiotics and synthetic hormone in effluents and aquatic systems of Vietnam is reported. This is followed by a potential ecological risk assessment of these pollutants. The extensive use of antibiotics and synthetic hormones in Vietnam could cause the discharge and accumulation of these contaminants in the aquatic systems and potentially poses serious risks for ecosystems. Vietnam is known to have extensively used antibiotics and synthetic hormones, so these contaminants are inevitably detected in aquatic systems. Thus, an appropriate monitoring program of these contaminants is urgently needed in order to mitigate their negative effects and protect the ecosystems.     

Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.