Implementing In-Stream Nutrient Processes in Large-Scale Landscape Modeling for the Impact Assessment on Water Quality

For a long time, watershed models focused on the transport of chemicals from the terrestrial part of the watershed to the surface water bodies by leaching and erosion. After the substances had reached the surface water, they were routed through the channel network often without any further transformation. Today, there is a need to extend watershed models with in-stream processes to bring them closer to natural conditions and to enhance their usability as support tools for water management and water quality policies. This paper presents experience with implementing in-stream processes in a ecohydrological dynamic watershed model and its application on the large scale in the Saale River basin in Germany. Results demonstrate that new implemented water quality parameters like chlorophyll a concentrations or oxygen amount in the reach can be reproduced quite well, although the model results, compared with results achieved without taking into account algal and transformation processes in the river, show obvious improvement only for some of the examined nutrients. Finally, some climate and water management scenarios expected to impact in-stream processes in the Saale basin were run. Their results illustrate the relative importance of physical boundary conditions on the amount and concentration of the phytoplankton, which leads to the conclusion that measures to improve water quality should not only take nutrient inputs into account but also climate influences and river morphology.     

Dye-sensitized photodegradation of the fungicide carbendazim and related benzimidazoles

The present work studies the visible-light-promoted photodegradation of the colorless fungicide carbendazim (methyl 2-benzimidazolecarbamate) and several 2-substituted benzimidazoles (SBZ's), in water or water-methanol solution, in the presence of air and, as a photosensitizer, the synthetic xanthene dye Rose Bengal (RB) or the natural pigment riboflavin (Rf). The results indicate that the degradation of each particular SBZ depends on its chemical structure and on the sensitizer employed. In the presence of RB, the degradation always operates via a singlet molecular oxygen (O(2)((1)Delta(g)))-mediated mechanism, through a highly efficient process, as deduced from the comparison of the rate constants for physical and chemical quenching of O(2)((1)Delta(g)). In the presence of Rf, the visible-light irradiation of any of the studied SBZ's produces a series of competitive processes that depend on the relative concentrations of Rf and SBZ. These processes include the quenching of excited singlet and triplet Rf states by the SBZ and the generation of both O(2)((1)Delta(g)) and superoxide radical anion (O(2)(-)), the latter generated by electron transfer from excited Rf species to the dissolved oxygen. The overall result is the photodegradation of the SBZ and the photoprotection of the sensitizer.     

Adsorption behavior of alpha -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of alpha -cypermethrin [R)-alpha -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-alpha-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze alpha -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time - 24 hours for both cork (1-2 mm and 3-4 mm) and GAC. For the studied alpha -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1-2 mm have the maximum amount of adsorbed alpha-cypermethrin (q(m)) (303 microg/g); followed by GAC (186 microg/g) and cork 3-4 mm (136 microg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the alpha -cypermethrin adsorption phenomena on GAC, while alpha -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing alpha -cypermethrin from water.     

Sun light degradation of 4-chloroaniline in waters and its effect on toxicity. A high performance liquid chromatography - Diode array - Tandem mass spectrometry study

This paper studies the degradation reactions that 4-chloroaniline can naturally undergo in waters for the action of sun light. 10.00 mg L⁻¹ 4-chloroaniline aqueous solution, without any addition of organic solvent, are undergone to photoirradiation under conditions that simulate sun light. The degradation pathway, followed by HPLC-DAD-MS/MS methods, is complex since the pollutant gives rise to many photoproducts: the predominant species are characterized by m/z values of 217 (P5) and 218 (P6) and are compatible with dimeric structures of 4-chloroaniline. Vibrio fischeri tests indicate that the photoproducts of 4-chloroaniline are characterized by a toxicity level significantly greater than the precursor.     

预制床法生物修复胜利油田含油污泥的研究

针对胜利油田滨一污水站产生的含油污泥,建立了面积2400 m2的预制床处理工程,使用石油降解菌菌剂对含油量为110 160mg(以每千克烘干含油污泥计)的污泥进行了生物修复,经过160 d的处理后,含油污泥中石油降解率可达52.75%.针对北方冬季低温的特点,在处理场中建立了温室保温措施.温室内外修复效果的比较表明,在冬季采取适当的保温措施可以明显提高污泥中石油烃类的降解率.     

Sedimentary organic matter and bacterial community in microtidal mixed beaches of the Ligurian Sea (NW Mediterranean)

The quantity and quality of organic matter, and bacterial density and frequency of dividing cells were investigated in six microtidal mixed beaches of the Ligurian Sea (NW Mediterranean) to evaluate their main trophodynamic features. Concentrations of biopolymeric carbon (average 88.5?±?89.0 µgC/g) and the protein:carbohydrate ratio (on average lower than 1) were very low and classified these beaches as highly oligotrophic. The study of biochemical composition highlighted the nature of organic matter as being mainly refractory; furthermore, the quantitative differences observed along the across-beach gradient together with the unchanged pattern in qualitative features suggest that the organic matter in Ligurian beaches is prevalently of marine origin. This implies a negligible contribution of allochtonous and anthropogenic terrestrial input or in situ autochthonous production. Bacterial density displayed values ranging from 0.1–9.0 cell?×?10⁸/g DW in the top 2?cm layer and showed a significant correlation with the quantity of organic matter. In addition, the frequency of dividing cells showed a positive correlation with the protein:carbohydrate ratio, suggesting that the biochemical composition of organic matter also has an influence on the active bacterial fraction. Because of the exposed nature, a strong coupling was found between the beach and the marine systems, and this seems to be of fundamental importance in terms of material and energy supply for the beach ecosystem. A shortage within this linkage was observed in summer owing to the strong environmental constrains leading to a sort of “beach desertification” and to a marked oligotrophy. Summer also has an effect of smoothing for spatial variability occurring within the biochemical and microbiological variables among the different beaches. The linkage observed between the sea and the land is the main factor controlling the origin and nature of sediment organic matter in these beaches also regulating bacterial abundances and the frequency of dividing cells.     

Evaluation of drinking water treatment and quality in Takua Pa, Thailand

After 2004 Indian Ocean Tsunami, which hit and devastated several Countries in Southeast Asia, University of Brescia and Mahidol University started a project on water monitoring and treatment for drinking purposes in Takua Pa district (Thailand), the most damaged by the tsunami. In particular, this paper presents the results of a study conducted to evaluate the effectiveness of Takua Pa drinking water treatment plant and to identify actions that could be adopted to improve its performances. The results show that, even if the effluent usually meets Thai guide values, except for pH which is already too acid in the influent, the plant needs several structural and managerial improvements, such as filtration and sedimentation upgrade, coagulation/flocculation and final disinfection re-organization, use of proper registers to better plan and control employees activities. Moreover, it was determined that water quality in the distribution network is characterized by turbidity and organic matter values higher than those evaluated in the plant effluent.     

UASB performance for bleached and unbleached kraft pulp synthetic wastewater treatment

This paper presents the performance of two bench scale Upflow Anaerobic Sludge Blanket reactors (UASB) used for the treatment of synthetic substrates that simulate bleached and unbleached cellulose pulp plant wastewaters. The control reactor was fed with diluted black liquor and the treatment reactor with the same substrate plus a mixture of chlorinated organics. The total concentration of the chlorinated compounds was gradually increased from 2.5 mg l-1 to 15.0 mg l-1. The average COD removal efficiency during the last phase of the experiment was 81% in the control reactor and 76% in the treatment reactor. These results indicate the capability of UASB reactors to treat this kind of wastewater and the low impact of the chlorinated organics on COD removal efficiency. The minimum overall chlorinated organics removal efficiency was 71% and the maximum was 99.7%. The experiment indicates that under the conditions used in this research the presence of chlorinated organics does not negatively impact the treatment process.