Assessment of Iodine Direct Titration in Sea Water by Constant Current Potentiometry

Abstract

Dissolved iodine in sea water, about 60 μg L^?1, usually exists in equal proportions as iodate and iodide ions. For their determination several techniques have been proposed (Riley, 1975); among them the volumetric one which depends upon the release of elementary iodine by the addition of acid and iodide ions to the iodate present in the sample. The liberated iodine is titrated with thiosulphate the equivalence point being detected photometrically (Matthews and Riley, 1970; Wong and Brewer, 1974) or it can also be reduced with an excess of thiosulphate and the residual thiosulphate back-titrated with iodate amperometrically (Barkley and Thompson, 1960; Truesdale and Spencer, 1974; Tsonkova and Kulev, 1981). To titrate total iodine in the sample the iodide must be previously oxidized to iodate with bromine (Barkley and Thompson, 1960; Tsonkova and Kulev, 1981) or permanganate (Schnepfe, 1972). In the amperometric procedure Truesdale and Spencer (1974) observed that platinum electrodes often do not respond reliably.     

Analysis of injury events with fuzzy cognitive maps

Issues related to health and safety at work, such as accidents at work, are one of the most important areas of action for global social policy. This paper presents a fuzzy cognitive map (FCM) approach to explore the importance of the relevant factors in industrial plants. For this purpose, industrial plants are described in terms of factors that affect injury risk and the causal relationships involved.In this work, the injuries in an Italian refinery have been studied. The company in this account has a system for monitoring and controlling the machinery but has a large number of minor injuries at work. The causes of these injuries have been found in human behaviours. To analyse the injuries, it is necessary to investigate what individual-level concerns are involved in the perception of risk. For this investigation, an FCM permits us to build a schema of the perception of risk. The resulting analysis of all of these schemas has allowed us to define a method that generically permits a determination of the causes for each type of injury. In fact, it has been possible to determine that factors such as poor attention and concentration or fatigue are the main causes of injuries at work.In light of the results obtained, managers can define appropriate control procedures to diminish the occurrences of the injuries.     

Solvent-free mechanochemical mild oxidation method to enhance adsorption properties of chitosan

• Solvent-free chitosan oxidation is obtained by rapid mechanochemical reaction. • Different oxidants induce very diverse physicochemical changes on chitosan. • Oxidized chitosan with persulfate or percarbonate has improved adsorption capacity. • Uptake on oxidized chitosan with persulfate is 125-fold faster than on pristine one. Oxidation has been profitably utilized to improve some properties of chitosan. However, only solvent-based oxidation procedures have been proposed so far, which are hardly feasible at industrial scale in an economic way because of product recovery cost. In this study, a solvent-free, rapid, and effective oxidation method is proposed. It is based on direct solid-state reaction between chitosan and oxidant powder in a mechanochemical reactor. Results prove that by short high energy ball milling (<3 h) it is possible to achieve diverse physicochemical modifications employing different reagents. Apart from polysaccharidic chain shortening, persulfate provokes high amorphization and induces formation of ketonic groups; percarbonate heightens deacetylation degree, preserving in part crystallinity; calcium peroxide merely deprotonates amino groups and increases amorphization degree. Adsorption tests with the azo-dye reactive red 2 show that adsorption capacity of chitosan co-milled with persulfate (974 mg/g milled product), which is the best performing adsorbent, is twice that of pristine chitosan, while adsorption rate is outstandingly boosted (125 times).     

Cement-clay pastes for stabilization/solidification of 2-chloroaniline

Immobilization of a model liquid organic pollutant, i.e. the 2-chloroaniline (2-CA), into a cement matrix using organoclays as pre-sorbent agents was investigated. Five cement-clay pastes were prepared with different nominal water-to-cement ratios (w/c=0.40, 0.25 and 0.15 wt/wt) and various amounts of waste (waste-to-cement o/c=0.20, 0.60 and 1.00 wt/wt); for comparison, a neat cement paste was also prepared. Dynamic leach tests were performed on solidified monoliths in order to assess the successful immobilization of the 2-CA. In monoliths at constant w/c ratio (0.40) the total amount of pollutant released increases with its initial content, and ranges from 15 to 35% with respect to it. By lowering w/c from 0.40 to 0.15 at constant o/c, the performances improved (<25% released). The microstructure of the hardened cement-clay pastes was characterized by quantitative X-ray diffraction (QXRD) and electronic microscopy (SEM-EDS) techniques; hydration degree was estimated by means of thermogravimetric analysis (TGA) in addition to QXRD. No evidence of any chemical reaction between 2-CA and cement phases was found. Moreover, it was shown that the most important factors affecting the cement hydration process were the total water content, i.e. the one taking also into account the water contained in the wet polluted clay, and the amount of 2-CA not firmly sorbed by the organoclay, and then freely dispersed in the paste.     

Inertization of hazardous dredging spoils

Vitrification and production of ceramics materials starting from sediment excavated from Venice lagoon is described. This sediment is classified as toxic waste because contains several heavy metal ions and organic pollutants and was successfully vitrified at 1200-1350 degrees C. Twenty weight percentage of glass cullet, coming from a community glass recycling program, was added to the raw materials, previously calcined at 900 degrees C, as a way of adjusting the variations of composition of the individual sediment batches. Chemical durability (leaching) tests showed that the optimized glass compositions are inert, and thus not only volume reduction but also inertization of the waste was obtained by this process. Moreover, the economics of the entire process was analysed. The valorization of the waste was accomplished by the subsequent processing of the glass derived from the inertization. Glass ceramic materials were produced by viscous phase sintering of pressed glass powders which crystallized during the densification process. Sintered glass ceramic products had good mechanical characteristics (HV = 7.5 GPa, bending strength 150 +/- 8 MPa), making them suitable for applications in the building industry.     

Environmental impact reduction through ecological planning at Bahia Magdalena, Mexico

For analyzing basic marine and coastal characteristics we selected the potential sites where shrimp culture could be developed in a large coastal zone, Bahia Magdalena, Baja California Sur, Mexico. Based on our analysis, 6 sites were preselected and field stages of work were then developed to assess the precise suitability of each site in order to develop the proposed aquaculture activities. In ranking the suitability we were able to recommend the most appropriate places to develop shrimp culture in this region. Also, knowing the exact biological, physico-chemical and social environment, we determined the best species to cultivate, the recommended total area and the methodology to be used to lessen the environmental impact and to obtain the maximum profitability Our methodology could be used not only to select appropriate sites for shrimp culture in other coastal lagoons, but it also could be applied to assess the suitability in a quick and accurate way, of any other production activity in coastal zones.     

Odorous emission reduction from a waste landfill with an optimal protection system based on fuzzy logic

Effective landfill management and operation require an accurate evaluation of the occurrence and extent of odour emission events, which are among the main causes of resident complaints and concerns, in particular in densely urbanised areas. This paper proposes a fuzzy optimal protection system (FOPS) based on fuzzy logic to manage odour production from a municipal solid waste (MSW) landfill. The case study is a MSW landfill in an old quarry site located 6 km north-west of Naples city centre (Italy). The aim is to reduce the odour nuisance in the area surrounding the landfill where there are several sensitive receptors. FOPS is based on logical relationships between local atmospheric dynamics, number and intensity of odour pollution events detected by certain fixed receptors and odour emission rate via an optimal fuzzy approach. Such system allows to start, in real time, established mitigation actions required to further reduce the odorous emissions from the landfill itself (e.g. spraying of perfumed substances and activation of extraction wells), especially when weather conditions might not be favourable and cause by causing a higher odour perception. The fuzzy system was coupled with the air pollutant transport software CALPUFF to simulate the odour dispersion in the considered area taking into account both different odour emission rates and local weather conditions. FOPS results show that this approach can be very useful as, by measuring the odour concentrations, a significant reduction of the odour exceedances over the thresholds fixed, to minimise the olfactory harassment, was observed in the whole area studied.

     

Microplastics in seawater: sampling strategies,laboratory methodologies,and identification techniques applied to port environment

Environmental Science and Pollution Research - The European Interreg Italy–France 2014–2020 Maritime Project SPlasH! (Stop to Plastics in H2O!) focused on the study of microplastics...     

Industrial point source CO<Subscript>2</Subscript> emission strength estimation with aircraft measurements and dispersion modelling

CO₂ remains the greenhouse gas that contributes most to anthropogenic global warming, and the evaluation of its emissions is of major interest to both research and regulatory purposes. Emission inventories generally provide quite reliable estimates of CO₂ emissions. However, because of intrinsic uncertainties associated with these estimates, it is of great importance to validate emission inventories against independent estimates. This paper describes an integrated approach combining aircraft measurements and a puff dispersion modelling framework by considering a CO₂ industrial point source, located in Biganos, France. CO₂ density measurements were obtained by applying the mass balance method, while CO₂ emission estimates were derived by implementing the CALMET/CALPUFF model chain. For the latter, three meteorological initializations were used: (i) WRF-modelled outputs initialized by ECMWF reanalyses; (ii) WRF-modelled outputs initialized by CFSR reanalyses and (iii) local in situ observations. Governmental inventorial data were used as reference for all applications. The strengths and weaknesses of the different approaches and how they affect emission estimation uncertainty were investigated. The mass balance based on aircraft measurements was quite succesful in capturing the point source emission strength (at worst with a 16% bias), while the accuracy of the dispersion modelling, markedly when using ECMWF initialization through the WRF model, was only slightly lower (estimation with an 18% bias). The analysis will help in highlighting some methodological best practices that can be used as guidelines for future experiments.