Adsorption of nutrients and cadmium by different minerals: experimental studies and modelling

This work analyses cadmium sorption by natural vermiculite, zeolite, and pumice, which have been recently considered for their potential use in remediation of contaminated soils. Batch experiments were performed to investigate the interactions between the mineral surfaces and the main nutritive cations of Hoagland solution. In addition to their ameliorative effect of reducing metal mobility, these minerals are able to interact to different extents with various components of the nutrient solution and can change the availability of essential nutrients in solution. Therefore, the minerals were also exposed to a range of cadmium doses to compare their different affinities for this element and to analyse the cadmium–nutrient interactions. The results showed that the nutrient solution composition was significantly modified by contact with zeolite and vermiculite, and to a minor extent with pumice. The ionic equilibrium between the solid and aqueous phases was attained at several time points depending on the cation. Ammonium and potassium ions were almost entirely absorbed by zeolite, while in vermiculite endogenous magnesium ions were exchanged with the liquid phase calcium ions. The amount of cadmium adsorbed on mineral surfaces equilibrated with the nutrient solution showed the following sequence zeolite>vermiculite>pumice, and the cation concentrations of the fluid phase were sensitive to cadmium addition.     

Environmental and biological monitoring of iridium in the city of Rome

The use of iridium in the latest catalytic converters to further reduce nitrogen oxide emission in the exhaust of lean-burn engines could result in increased atmospheric levels of this element in high-density vehicle traffic areas. The objective of this study is to assess environmental Ir pollution and its urinary levels in workers and an urban control group. Environmental monitoring inside a tram consisted in air samplings of total suspended particles (TSP), PM10 and PM2.5 carried out during November 2005. Urinary Ir levels were evaluated in 64 municipal tram drivers and in 58 administrative employees as controls. Quantification of Ir in air samples and urine was performed by means of Sector Field Inductively Coupled Plasma Mass Spectrometry. Means+/-standard deviation of Ir levels in TSP, in PM10 and PM2.5 fractions were 1.43+/-1.66, 0.44+/-0.27 and 0.36+/-0.19 pg m(-3), respectively. No statistically significant differences were observed among urinary Ir values in the exposed subjects and control group. The Ir levels in Rome air are still sufficiently low, even if the increased use of new Ir-based catalysts could be of some concern in the near future. The results of our study are of interest as they are a first attempt to explore airborne levels and urinary concentrations of Ir in an urban context at medium-high density of vehicle traffic. Particular attention should be given to the fact that Ir was found in the finest dust particles as the effects of fine particles containing Ir have not yet been studied.     

Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

Degradation of cyprodinil, fludioxonil, cyfluthrin and pymetrozine on lettuce after different application methods

Degradation of two fungicides (cyprodinil and fludioxonil) and two insecticides (cyfluthrin and pymetrozine) applied on iceberg and romaine lettuce under field conditions with different methods (portable mistblower and chemigation) was studied field data showed that both distribution methods and lettuce cultivar affect the degradation trends of examined pesticides. In these trials the residues of all active ingredients after pre-harvest time were less than fifty's maximum residue levels; the values in the romaine cultivar were generally higher than those in iceberg lettuce. After pre-harvest time residues of pesticides applied on romaine lettuce by portable motor sprayer were always higher than those obtained by the chemigation system.     

Mapping Soil Gas Radon Concentration: A Comparative Study of Geostatistical Methods

Understanding soil gas radon spatial variations can allow the constructor of a new house to prevent radon gas flowing from the ground. Indoor radon concentration distribution depends on many parameters and it is difficult to use its spatial variation to assess radon potential. Many scientists use to measure outdoor soil gas radon concentrations to assess the radon potential. Geostatistical methods provide us a valuable tool to study spatial structure of radon concentration and mapping. To explore the structure of soil gas radon concentration within an area in south Italy and choice a kriging algorithm, we compared the prediction performances of four different kriging algorithms: ordinary kriging, lognormal kriging, ordinary multi-Gaussian kriging, and ordinary indicator cokriging. Their results were compared using an independent validation data set. The comparison of predictions was based on three measures of accuracy: (1) the mean absolute error, (2) the mean-squared error of prediction; (3) the mean relative error, and a measure of effectiveness: the goodness-of-prediction estimate. The results obtained in this case study showed that the multi-Gaussian kriging was the most accurate approach among those considered. Comparing radon anomalies with lithology and fault locations, no evidence of a strict correlation between type of outcropping terrain and radon anomalies was found, except in the western sector where there were granitic and gneissic terrain. Moreover, there was a clear correlation between radon anomalies and fault systems.     

Assessment of the applicability of a “toolbox” designed for microbially assisted phytoremediation: the case study at Ingurtosu mining site (Italy)

The paper describes the fieldwork at the Italian test site of the abandoned mine of sphalerite and galena in Ingurtosu (Sardinia), with the aim to assess the applicability of a “toolbox” to establish the optimized techniques for remediation of soils contaminated by mining activities. A preliminary characterization—including (hydro)geochemistry, heavy metal concentration and their mobility in soil, bioprospecting for microbiology and botany—provided a data set for the development of a toolbox to deliver a microbially assisted phytoremediation process. Euphorbia pithyusa was selected as an endemic pioneer plant to be associated with a bacterial consortium, established with ten selected native strains, including metal-tolerant bacteria and producers of plant growth factors. The toolbox was firstly assessed in a greenhouse pot experiment. A positive effect of bacterial inoculum on E. pithyusa germination and total plant survival was observed. E. pithyusa showed to be a well-performing metallophyte species, and only inoculated soil retained a microbial activity with a high functional diversity, expanding metabolic affinity also towards root exudates. These results supported the decision to proceed with a field trial, investigating different treatments used singly or in combination: bioaugmentation with bacterial consortia, mycorrhizal fungi and a commercial mineral amendment. Microbial activity in soil, plant physiological parameters and heavy metal content in plants and in soil were monitored. Five months after the beginning, an early assessment of the toolbox under field conditions was carried out. Despite the cold season (October–March), results suggested the following: (1) the field setup as well as the experimental design proved to be effective; (2) plant survival was satisfactory; (3) soil quality was increased and bioaugmentation improved microbial activity, expanding the metabolic competences towards plant interaction (root exudates); and (4) multivariate analysis supported the data provided that the proposed toolbox can be established and the field trial can be carried forward.