Reconstruction of the environmental evolution of a Sicilian saltmarsh (Italy)

The present study deals with the reconstruction of the environmental evolution of a Trapani saltmarsh (southwestern Sicily, Italy) by combining different analytical approaches such as metal content evaluation, low-field nuclear magnetic resonance (NMR) relaxometry, and benthic foraminifera identification. A 41 cm core was collected in the sediments of a Trapani saltmarsh (southwestern Sicily, Italy) at a water depth of about 50 cm. Different time intervals were recognized, each characterized by peculiar features that testify different environmental conditions. In particular, the bottom layers of the sediment core (41–28 cm) comprised the lowest amount of mud fraction, only some selected metals, and the lowest foraminiferal density. Here, co-occurrence of abundant microcrystals of gypsum and Ammonia tepida is indicative of hyper-saline conditions. In the sediments from 28 to 6 cm, mud fraction and number of metal elements resulted higher due to the increase of the anthropogenic pressure. The sediments in the last time interval, corresponding to the environmental recovery of the saltmarsh, showed an increase of foraminiferal density, a decrease of the mud fraction, and a trend in the metal concentration attributable to the protection policy applied since 1990. NMR relaxometry parameters highlighted the changes of sediment chemical–physical heterogeneity going from the bottom to the top of the core. These heterogeneities have been related to the different intervals recognized as aforementioned. The present study highlights how the anthropogenic pressure modifies the environmental conditions of a transitional ecosystem like saltmarshes.     

Dissipation of terbuthylazine,metolachlor, and mesotrione in soils with contrasting texture

ABSTRACT

This study evaluates the dissipation of terbuthylazine, metolachlor, and mesotrione at different depths in soils with contrasting texture. The field trial was conducted at the Padua University Experimental Farm, north-east Italy. The persistence of three herbicides was studied in three different soil textures (clay soil, sandy soil, and loamy soil) at two depths (0–5 and 5–15 cm). Soil organic carbon content was highest in the clay (1.10%) followed by loam (0.67%) and sandy soil (0.24%); the pH of soils was sub-alkaline. Terbuthylazine, metolachlor, and mesotrione were applied on maize as a formulated product (Lumax®) at a dose of 3.5 L ha^?1. Their dissipation in the treated plots was followed for 2 months after application. The concentrations of herbicides were analyzed by liquid chromatography-mass spectrometry. The dissipation of terbuthylazine, metolachlor, and mesotrione could be described by a pseudo first-order kinetics. Terbuthylazine showed the highest DT50, followed by metolachlor and mesotrione. Considering the tested soil, the highest DT50 value was found in clay soil for terbuthylazine and metolachlor, whereas for mesotrione there was no difference among soils. Significant differences were found between the two soil depths for terbuthylazine and metolachlor, whereas none were found for mesotrione. These results suggest that soil texture and depth have a strong influence on the dissipation of terbuthylazine and metolachlor, whereas no influence was observed on mesotrione because of its chemical and physical properties.     

Enhancing phytoextraction of Cd by combining poplar (clone “I-214”) with Pseudomonas fluorescens and microbial consortia

The plant–microorganism combinations may contribute to the success of phytoextraction of heavy metal-polluted soil. The purpose of this study was to investigate the effects of cadmium (Cd) soil concentration on selected physiological parameters of the poplar clone “I-214” inoculated at root level with a strain (BT4) of Pseudomonas fluorescens and a commercial product based on microbial consortia (Micosat F Fito®). Plants were subjected to Cd treatment of 40 mg kg^?1 in greenhouse. The effects of plant–microbe interactions, plant growth, leaf physiology, and microbial activity were periodically monitored. Metal concentration and translocation factors in plant tissues proved enhanced Cd uptake in roots of plants inoculated with P. fluorescens and transfer to shoots in plants inoculated with Micosat F Fito®, suggesting a promising strategy for using microbes in support of Cd uptake. Plant–microbe integration increased total removal of Cd, without interfering with plant growth, while improving the photosynthetic capacity. Two major mechanisms of metal phytoextraction inducted by microbial inoculation may be suggested: improved Cd accumulation in roots inoculated with P. fluorescens, implying phytostabilization prospective and high Cd transfer to shoots of inoculated plants, outlining enhanced metal translocation.     

Use of a reactive transport model to describe reductive dechlorination (RD) as a remediation design tool: application at a CAH-contaminated site

In this paper, a numerical model is presented that is capable of describing the complex set of biochemical processes that occur in chlorinated aliphatic hydrocarbon (CAH)-contaminated groundwater when an exogenous electron donor is added. The reactive pattern is based on the degradation pathways of both chlorinated ethanes and ethenes, and it includes electron donor production (H₂ and acetate) from the fermentation of an organic substrate as well as rate-limiting processes related to electron acceptor competition. Coupling of the kinetic model to a convection–dispersion module is described. The calibration phase was carried out using data obtained at a real CAH-contaminated site in the north of Italy. Model simulations of different application scenarios are presented to draw general conclusions on the effectiveness of reductive dechlorination (RD) as a possible cleanup strategy. Early outcomes indicate that cleanup targets can only be achieved if source longevity is reduced. Therefore, metabolic RD is expected to produce beneficial effects because it is known to induce bioenhanced degradation and transformation of CAHs.     

Emission of air pollutants from burning candles with different composition in indoor environments

Candle composition is expected to influence the air pollutants emissions, possibly leading to important differences in the emissions of volatile organic compounds and polycyclic aromatic hydrocarbons. In this regard, the purity of the raw materials and additives used can play a key role. Consequently, in this work emission factors for some polycyclic aromatic hydrocarbons, aromatic species, short-chain aldehydes and particulate matter have been determined for container candles constituted by different paraffin waxes burning in a test chamber. It has been found that wax quality strongly influences the air pollutant emissions. These results could be used, at least at a first glance, to foresee the expected pollutant concentration in a given indoor environment with respect to health safety standards, while the test chamber used for performing the reported results could be useful to estimate the emission factors of any other candle in an easy-to-build standardised environment.     

Natural and enhanced biodegradation of propylene glycol in airport soil

Aircraft de-icing fluids (ADF) are a source of water and soil pollution in airport sites. Propylene glycol (PG) is a main component in several commercial formulations of ADFs. Even though PG is biodegradable in soil, seasonal overloads may result in occasional groundwater contamination. Feasibility studies for the biostimulation of PG degradation in soil have been carried out in soil slurries, soil microcosms and enrichment cultures with and without the addition of nutrients (N and P sources, oligoelements), alternative electron acceptors (nitrate, oxygen releasing compounds) and adsorbents (activated carbon). Soil samples have been taken from the contaminated area of Gardermoen Airport Oslo. Under aerobic conditions and in the absence of added nutrients, no or scarce biomass growth is observed and PG degradation occurs by maintenance metabolism at constant removal rate by the original population of PG degraders. With the addition of nutrient, biomass exponential growth enhances aerobic PG degradation also at low temperatures (4 ° C) that occur at the high season of snowmelt. Anaerobic PG degradation without added nutrients still proceeds at constant rate (i.e. no biomass growth) and gives rise to reduced fermentation product (propionic acid, reduced Fe and Mn, methane). The addition of nitrate does not promote biomass growth but allows full PG mineralization without reduced by-products. Further exploitation on the field is necessary to fully evaluate the effect of oxygen releasing compounds and adsorbents.     

PCDD/Fs and PCBs in ambient air in a highly industrialized city in Northern Italy

Ambient air samples were collected in five locations around a polychlorobiphenyl (PCB) production plant in a highly industrialized city in the north of Italy, for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) and PCBs.PCDD/F atmospheric concentrations were lower than those generally detected in urban areas, while PCB concentrations were higher than in urban and industrialized areas in other countries, especially in the locations closest to the plant. To identify source emissions responsible for air pollution we used principal component analysis (PCA) to compare the “fingerprint” of the air in Brescia with some source-related experimental and published data. This analysis showed that the PCDD/F fingerprints were more similar to steel plant emission data, while none of the PCB air patterns were comparable to emission profiles, indicating that different sources are responsible for the concentration of these two pollutants. The highest PCB concentrations detected in the areas closest to the chemical plant are indicative of its impact on the surrounding environment.     

Contamination by polychlorinated biphenyls (PCBs) in striped dolphins (Stenella coeruleoalba) from the Southeastern Mediterranean Sea

Concentrations of polychlorinated biphenyls (PCBs) including dioxin-like PCBs (non-ortho, PCB 77, PCB 126, and PCB 169 and mono-ortho, PCB 105, PCB 118, and PCB 156) were measured in different organs and tissues (melon, blubber, liver, kidney, lung, heart, and muscle tissue) of striped dolphins (Stenella coeruleoalba) from the Eastern Mediterranean Sea (Adriatic Sea). The mean highest levels were in blubber and melon, followed by liver, kidney, lung, heart, and muscle tissue. PCB profiles were similar in all tissues and organs being dominated by the higher chlorinated homologues (hexa-CBs, 55.8-62.1%; penta-CBs, 15.4-20.0%; and hepta-CB PCB 180, 12.7-16.5%). Major PCBs in all tissues were congeners 138 and 153 collectively accounting for 50.6-58.3% of the total PCB concentrations, followed by PCB 101, 105, 118, and 180 constituting from 27.0% to 31.0%. PCB levels were higher in adult males than in adult females. The estimated 2,3,7,8-TCDD toxic equivalents of non- and mono-ortho PCBs were much higher than the threshold level above which adverse effects have been observed in other marine mammals species, suggesting that striped dolphins in this region are at risk for toxic effects.